Commit Graph

235 Commits

Author SHA1 Message Date
Matt McWilliams d2390dca30 Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs 2023-04-16 23:33:11 -04:00
Matt McWilliams 503a8ec92f Add magnets to bellows board design 2023-04-16 22:53:16 -04:00
Matt McWilliams 1f5bb85304 Correctly reference LEDs 2023-04-11 22:39:44 -04:00
Matt McWilliams 9e7990851e Case design work 2023-04-10 21:04:01 -04:00
Matt McWilliams c1a51f1ce8 Canon EF bellows adapter 2023-04-01 19:24:29 -04:00
Matt McWilliams 13702a3d5b Add a canon_EF_body_cap script 2023-03-30 20:15:43 -04:00
Matt McWilliams 6b66cfe03f Add bolt voids to canon mount 2023-03-29 22:47:49 -04:00
Matt McWilliams cbc876c57c Case ready for production 2023-03-29 21:58:03 -04:00
Matt McWilliams 7813a8c904 First draft of Rebel case 2023-03-28 19:41:35 -04:00
Matt McWilliams 5f941e91b5 Add conecpt for arduino nano case 2023-03-26 20:19:15 -04:00
Matt McWilliams d262ed418d Add base to socket connector. 2023-03-26 20:19:00 -04:00
Matt McWilliams 2e9db4d667 Connector size is working 2023-03-26 18:53:01 -04:00
Matt McWilliams bd9317dd8f Adjust angles. Make $fn configurable (crashing the GUI on my desktop). 2023-03-26 17:53:26 -04:00
Matt McWilliams 1528dec668 Rename bellows adapter 2023-03-24 13:51:29 -04:00
Matt McWilliams 5c6b9191e5 Work in progress: Serial does not work from external library 2023-03-20 19:45:32 -04:00
Matt McWilliams fbe954280f Socket connector work 2023-03-18 17:00:02 -04:00
Matt McWilliams 790ea3d551 Add guides for collar flanges 2023-03-15 22:11:48 -04:00
Matt McWilliams c6b8592490 Enlarge case and add bolt 2023-03-15 21:35:35 -04:00
Matt McWilliams f67e011d5e Canon EOS M50 mount design 2023-03-15 21:35:23 -04:00
Matt McWilliams a4bc54482d Work on canon mount 2023-03-15 19:22:18 -04:00
Matt McWilliams be50eb6fcf Work on ESP32 case and CPC socket 2023-03-14 21:45:18 -04:00
Matt McWilliams a7d784583a Case for an ESP32 dev board (Inland, Microcenter) 2023-03-13 17:46:38 -04:00
Matt McWilliams 7af1f739e4 Canon EF M bellows mount 2023-03-13 17:46:21 -04:00
Matt McWilliams 3e247703a8 More CPC connector work 2023-03-13 17:45:50 -04:00
Matt McWilliams c7e338ebff projector electronics improvements, move arduino mount, increase size, adjust resistor mount 2023-03-12 21:28:29 -04:00
Matt McWilliams cc2af435d5 First pass at esp32 case 2023-03-12 17:55:09 -04:00
Matt McWilliams 87695b173d First pass at projector controller design and refactor of sequencer case. 2023-03-12 16:36:16 -04:00
Matt McWilliams 346c303edb First pass at connector plug 2023-03-08 16:01:02 -05:00
Matt McWilliams 908fe52ad8 Simplify projector_controller.scad 2023-03-05 17:14:01 -05:00
Matt McWilliams 3fd1e47b7b Rename sleeve to collar 2023-03-05 17:13:42 -05:00
Matt McWilliams 2047ce4f76 cpc connector work 2023-03-05 00:28:39 -05:00
Matt McWilliams 3ef56cab21 Compile all Arri-S parts 2023-03-04 20:20:16 -05:00
Matt McWilliams 6b77b98aad Add more files to scad.sh 2023-03-04 20:00:01 -05:00
Matt McWilliams 211101cd6b Add common SCAD lib. Add a script that compiles all scad files to stl (make is getting excessive). Canonicalize STL files after they're compiled. 2023-03-04 19:44:20 -05:00
Matt McWilliams cff558ef9a Add 15mm to mount void for camera bolt 2023-02-12 14:14:03 -05:00
Matt McWilliams 325837d93e Adjustment to allow space on the right side 2023-02-12 14:10:44 -05:00
Matt McWilliams 135540b261 Remove some material for the rails 2023-02-03 20:08:18 -05:00
Matt McWilliams 49464cd25a Finished the design of the lens assembly base z attachment 2023-02-02 19:48:30 -05:00
Matt McWilliams d0fe54b429 Add m5 nut to the common lib 2023-02-02 19:48:08 -05:00
Matt McWilliams 2dce6f4b08 Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper 2023-01-31 11:52:13 -05:00
Matt McWilliams 99794d04c2 jk assembly and arri-s wip 2023-01-31 11:52:10 -05:00
Matt McWilliams cc06655cd6 Update debug 2023-01-23 00:28:26 -05:00
Matt McWilliams ab6f517d27 Rails work 2023-01-17 12:04:03 -05:00
Matt McWilliams f127dc1128 Merge remote-tracking branch 'origin/capper' into capper 2023-01-14 15:26:07 -05:00
Matt McWilliams 0b816ae8e1 Adjust the position of the Z axis, move the linear bearing up and down to prevent binding on motion 2023-01-14 15:25:53 -05:00
Matt McWilliams c600fea4e1 Start rails concept 2023-01-12 19:26:05 -05:00
Matt McWilliams 92067bdbef Add top part to assembly 2023-01-11 19:17:15 -05:00
Matt McWilliams c181e003a3 First draft of base 2023-01-07 18:43:59 -05:00
Matt McWilliams 597137670d Merge base work with knob changes 2023-01-06 10:31:25 -05:00
Matt McWilliams 3036aebbc4 Knob and collar work 2023-01-06 09:18:03 -05:00
Matt McWilliams cbe6477af2 Improvements to bearing and Tnut size 2023-01-05 17:35:25 -05:00
Matthew McWilliams c2546d2bc5 Add m3 nuts and bolts to threaded z movement 2023-01-05 14:40:25 -05:00
Matt McWilliams 46be1bfd3b Assembly work. Adjusted design to simplify placement of 2 linear bearings 2023-01-04 23:11:48 -05:00
Matt McWilliams 1029885047 Update threaded Z, still needs m3 bolts 2023-01-04 18:26:22 -05:00
Matt McWilliams 164bde8cce All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch. 2023-01-03 21:16:19 -05:00
Matt McWilliams 41504caac9 Increase the bolt size on the bellows board 2023-01-02 17:11:44 -05:00
Matt McWilliams 9b34b4e026 Adjust the height of the mount (-14.5mm) and make bolt voids larger 2023-01-02 14:33:16 -05:00
Matt McWilliams 95612c1d18 Add m3 nuts 2023-01-02 14:30:54 -05:00
Matt McWilliams 0829ec9081 Use a variable 2023-01-02 13:53:41 -05:00
Matt McWilliams ef0d246901 Increase the inner diameter of the bellows board to allow the threads to pass through cleanly and be held in place by the screw 2023-01-02 13:53:30 -05:00
Matt McWilliams 925659ba4b Create an Arri S mount for the JK rails 2023-01-01 11:43:21 -05:00
Matt McWilliams 20c9287ac2 Work on concept JK lens assembly 2022-12-24 17:36:25 -05:00
Matt McWilliams 8aaa2b8940 Add a concept JK lens assembly 2022-12-24 01:55:11 -05:00
Matt McWilliams 30bd35e21d Add an M4 nut to the common OpenSCAD lib 2022-12-24 01:54:57 -05:00
Matthew McWilliams 0c2e39f0b2 Arri bellows work 2022-12-23 23:01:37 -05:00
Matt McWilliams ee1e9c9feb Stepper firmware is working. Needed extra tape around coupling connector to add friction to connection and now it keeps. 2022-11-04 19:37:11 -04:00
Matt McWilliams fcb77232ec Create the driveCoupling module for the stepper motor design 2022-10-30 12:14:25 -04:00
Matt McWilliams 1fcbec7466 Work on stepper motor design and software. Motor still moves more slowly than it should but will investigate multiple factors leading to this result 2022-10-28 19:46:02 -04:00
Matt McWilliams bb5b7c7897 Add divot to the drive coupling 2022-10-28 07:44:19 -04:00
Matt McWilliams 42b3aa767d Allow for even more space for microswritch 2022-10-28 01:32:58 -04:00
Matt McWilliams b20a6084e6 Allow for more space for the microswitch 2022-10-27 18:10:13 -04:00
Matthew McWilliams d9a8576701 Adjust size of drive coupling for the DC connector 2022-10-21 16:05:56 -04:00
Matthew McWilliams 69273d2a1c Increase scale of motor shaft void by 5% 2022-10-21 15:26:17 -04:00
Matthew McWilliams 755ea757f7 Add set screw for bearing and counter sink bolt caps for other cap m3s 2022-10-21 15:24:21 -04:00
Matt McWilliams 81fc54af8d DC motor design has all components designed, need to print, test and adjust. 2022-10-19 06:38:56 -04:00
Matt McWilliams 4281ca4390 Work on Arri-S DC motor 2022-10-16 19:03:02 -04:00
Matt McWilliams 3419172535 Arri-S work 2022-10-15 00:13:05 -04:00
Matt McWilliams 206c266b08 Added Arri-S motor and cap measurements as taken 10/8/2022 2022-10-09 11:22:12 -04:00
Matthew McWilliams 5026cf869f Arri-S work 2022-10-07 19:47:56 -04:00
Matt McWilliams 1964d6002d Add mono logo as png, but might use svg instead. Render crashed PC. 2022-07-22 21:56:43 -04:00
Matt McWilliams ea055d6e56 Capper case candidate 2022-07-13 23:04:00 -04:00
Matthew McWilliams bc48765b35 Start work on base 2022-07-13 18:16:43 -04:00
Matthew McWilliams 70c2c695f0 All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity. 2022-07-13 15:21:26 -04:00
Matthew McWilliams c33c6e24f6 Work on motor rod 2022-07-13 09:01:25 -04:00
Matt McWilliams 2924efe39f Reduce the size of the void for the screw in the cap. 2022-06-28 08:34:29 -04:00
Matt McWilliams e275539fb0 Remove endstop completely and start rounding surfaces. 2022-06-22 07:45:01 -04:00
Matt McWilliams 4c13c54815 Updates to endstop mount design. Had incorrectly positioned voids for SMD chips on the endstop 2022-06-20 13:00:40 -04:00
Matt McWilliams 62a66f5f6d More mount work and start of endstop logic. Rebuilding the B&H projector unity. 2022-06-17 23:39:19 -04:00
Matt McWilliams 3a435933e3 Work on the opto endstop mount. This needs to be re-oriented before next print. 2022-06-16 00:29:31 -04:00
Matt McWilliams 78f7ac0e68 Mount work 2022-06-13 22:46:23 -04:00
Matt McWilliams 04a0330327 All work on first draft of capper hardware 2022-06-12 22:26:03 -04:00
Matt McWilliams 2f9201716a All capper work. Debug firmware for testing. STL of cap as printed. 2022-06-12 13:14:43 -04:00
Matt McWilliams 818c8453ee Capper OpenSCAD work 2022-06-11 16:03:08 -04:00
Matt McWilliams 9d3bf24627 Hardware ideas for capper mount and flag. Need to model servo and add places for endstops 2022-06-07 07:55:47 -04:00
Matt McWilliams b3bb07454f Add a lamp housing knob 2021-04-05 10:40:50 -04:00
Matt McWilliams 6fee5a803c connector case box 2021-03-19 21:32:53 -04:00
Matt McWilliams 2c8eabeffd 3D printable panel for the Oxberry control box. 2021-02-22 13:24:18 -05:00
sixteenmillimeter d501623290 Updated projector knob for printing 2020-08-18 14:20:15 -04:00
sixteenmillimeter 0ccb29dfb0 Shape for the friction knob on the JK 106 projection system. 2020-08-10 23:52:54 -04:00
mmcwilliams b702929e1f cases work 2020-07-07 11:54:20 -04:00
sixteenmillimeter d042381293 Projector work 2020-07-07 11:54:01 -04:00
sixteenmillimeter 53e012018f JK projector WIP 2020-07-01 18:04:17 -04:00
sixteenmillimeter 420a3fbd50 Sequencer case 2020-07-01 18:04:10 -04:00
sixteenmillimeter 5258fcbf30 Rails work 2020-07-01 18:04:03 -04:00
sixteenmillimeter 4db3ce8b88 jk camera controller case 2020-07-01 18:03:40 -04:00
mmcwilliams f4eb066725 camera conjtroller mod work 2020-05-27 16:47:14 -04:00
mmcwilliams 867d6a4069 Update cases 2019-05-06 13:24:40 -04:00
mmcwilliams f33dbb2f1b Enlarge box 2019-05-06 13:24:40 -04:00
mmcwilliams 4f9de487cc Move all scad files into scad dir 2019-04-24 14:06:35 -04:00
mmcwilliams f2c2d6ce43 WIP wednesday 2019-03-20 18:37:00 -04:00
mmcwilliams 1d993b85d3 Create a scad file for extra odds and ends for the JK 2019-03-18 18:28:09 -04:00
mmcwilliams 74b326caeb Add ANYEYE scad work. Contains the motor key for connecting the INTVAL2/3 style motor mount and microswitch to a Revere 16mm projector. 2019-03-18 16:49:00 -04:00
mmcwilliams 7398f7993d Start work on secondary projector feature 2019-02-25 18:14:29 -05:00
mmcw-dev e8e3d821fa Reduce diameter of the bellows board bolt 2018-02-15 14:54:00 -05:00
mmcw-dev 1ae6672957 Mcopy light mount improved. 2018-02-01 14:00:42 -05:00
mmcw-dev 298964c678 light spacing tested 2018-01-18 23:49:22 -05:00
mmcw-dev 5003654629 Diffuser insert improved based on tests. 2018-01-18 23:26:27 -05:00
mmcw-dev 489df48c17 The arbitrary mount allows the diffuser mount to slide along a horizontal axis. 2018-01-18 13:49:04 -05:00
mmcw-dev 51151ea9fe Diffuser mount made for adjusting distance 2018-01-18 12:20:24 -05:00
mmcwilliams 36329fe34e Add the jk.scad work for modifying the JK-103 2018-01-17 18:10:12 -05:00
mmcw-dev 9993631353 Add light module for 35mm fan 2018-01-16 09:54:23 -05:00
mmcw-dev 1a42f260fe Add the experimental "fresnel" pattern generator for laser cutting. The hypothesis is that by melting the surface of an acrylic sheet, light from the LED source will be better projected forward onto the surface of the diffuser sheet. 2018-01-16 00:57:20 -05:00
mmcw-dev 234b2b89dc The light is ready to print with an arbitrary stand for the bell and howell projector. 2018-01-15 22:59:48 -05:00
mmcw-dev 2934e70bd1 Light mount ready for printing with impromptu mount 2018-01-15 22:19:26 -05:00
mmcw-dev e0af07c52c Light and lens work 2018-01-15 21:17:19 -05:00
mmcw-dev cef1c1fd93 All work to date on hardware. Made connectors, started carriage and re-started light. 2018-01-02 01:13:09 -05:00
mmcwilliams f9a3f05118 Add prism module to potentially use [this prism](http://amzn.to/2ChhcNy) in the design of a light with 3 [Adafruit Pixies](https://www.adafruit.com/product/2741), 9W at max. Potentially a stupid idea, but should be explored. 2017-12-31 00:54:09 -05:00
mmcw-dev 38d6409343 Openscad progress, made carriage, set up plates 2017-12-28 23:34:04 -05:00
mmcw-dev e32b9a8a2e Include development work from previous projects. Create an "mcopy.scad" file for laying out all parts in a single space (for renders). 2017-12-28 21:08:58 -05:00
mmcw-dev 5a842f89c9 Multi-part jk103 connector. 2017-12-28 20:24:49 -05:00
mmcw-dev ee081160b7 V1 of the jk connector, split into 2 parts to be assembled and attached. 2017-12-27 22:23:37 -05:00
mmcw-dev 8832a60949 Add camera mount for attaching to bellows plate. 2017-12-27 22:22:21 -05:00
mmcw-dev bc50941746 Create bellows hardware, cmount interface to bellows 2017-12-21 00:19:29 -05:00
Matt McWilliams f4167de6c7 Add arduino mount and pins libraries
These will be used in the mcopy hardware designs
2016-05-04 17:28:53 -04:00
Matt 600f3c37c4 Add knurling library 2016-04-11 00:45:13 -04:00