Add knurling library

This commit is contained in:
Matt 2016-04-11 00:45:13 -04:00
parent 2453c8b9ce
commit 600f3c37c4
1 changed files with 181 additions and 0 deletions

View File

@ -0,0 +1,181 @@
/*
* knurledFinishLib_v2.scad
*
* Written by aubenc @ Thingiverse
*
* This script is licensed under the Public Domain license.
*
* http://www.thingiverse.com/thing:31122
*
* Derived from knurledFinishLib.scad (also Public Domain license) available at
*
* http://www.thingiverse.com/thing:9095
*
* Usage:
*
* Drop this script somewhere where OpenSCAD can find it (your current project's
* working directory/folder or your OpenSCAD libraries directory/folder).
*
* Add the line:
*
* use <knurledFinishLib_v2.scad>
*
* in your OpenSCAD script and call either...
*
* knurled_cyl( Knurled cylinder height,
* Knurled cylinder outer diameter,
* Knurl polyhedron width,
* Knurl polyhedron height,
* Knurl polyhedron depth,
* Cylinder ends smoothed height,
* Knurled surface smoothing amount );
*
* ...or...
*
* knurl();
*
* If you use knurled_cyl() module, you need to specify the values for all and
*
* Call the module ' help(); ' for a little bit more of detail
* and/or take a look to the PDF available at http://www.thingiverse.com/thing:9095
* for a in depth descrition of the knurl properties.
*/
module knurl( k_cyl_hg = 12,
k_cyl_od = 25,
knurl_wd = 3,
knurl_hg = 4,
knurl_dp = 1.5,
e_smooth = 2,
s_smooth = 0)
{
knurled_cyl(k_cyl_hg, k_cyl_od,
knurl_wd, knurl_hg, knurl_dp,
e_smooth, s_smooth);
}
module knurled_cyl(chg, cod, cwd, csh, cdp, fsh, smt)
{
cord=(cod+cdp+cdp*smt/100)/2;
cird=cord-cdp;
cfn=round(2*cird*PI/cwd);
clf=360/cfn;
crn=ceil(chg/csh);
echo("knurled cylinder max diameter: ", 2*cord);
echo("knurled cylinder min diameter: ", 2*cird);
if( fsh < 0 )
{
union()
{
shape(fsh, cird+cdp*smt/100, cord, cfn*4, chg);
translate([0,0,-(crn*csh-chg)/2])
knurled_finish(cord, cird, clf, csh, cfn, crn);
}
}
else if ( fsh == 0 )
{
intersection()
{
cylinder(h=chg, r=cord-cdp*smt/100, $fn=2*cfn, center=false);
translate([0,0,-(crn*csh-chg)/2])
knurled_finish(cord, cird, clf, csh, cfn, crn);
}
}
else
{
intersection()
{
shape(fsh, cird, cord-cdp*smt/100, cfn*4, chg);
translate([0,0,-(crn*csh-chg)/2])
knurled_finish(cord, cird, clf, csh, cfn, crn);
}
}
}
module shape(hsh, ird, ord, fn4, hg)
{
x0= 0; x1 = hsh > 0 ? ird : ord; x2 = hsh > 0 ? ord : ird;
y0=-0.1; y1=0; y2=abs(hsh); y3=hg-abs(hsh); y4=hg; y5=hg+0.1;
if ( hsh >= 0 )
{
rotate_extrude(convexity=10, $fn=fn4)
polygon(points=[ [x0,y1],[x1,y1],[x2,y2],[x2,y3],[x1,y4],[x0,y4] ],
paths=[ [0,1,2,3,4,5] ]);
}
else
{
rotate_extrude(convexity=10, $fn=fn4)
polygon(points=[ [x0,y0],[x1,y0],[x1,y1],[x2,y2],
[x2,y3],[x1,y4],[x1,y5],[x0,y5] ],
paths=[ [0,1,2,3,4,5,6,7] ]);
}
}
module knurled_finish(ord, ird, lf, sh, fn, rn)
{
for(j=[0:rn-1])
assign(h0=sh*j, h1=sh*(j+1/2), h2=sh*(j+1))
{
for(i=[0:fn-1])
assign(lf0=lf*i, lf1=lf*(i+1/2), lf2=lf*(i+1))
{
polyhedron(
points=[
[ 0,0,h0],
[ ord*cos(lf0), ord*sin(lf0), h0],
[ ird*cos(lf1), ird*sin(lf1), h0],
[ ord*cos(lf2), ord*sin(lf2), h0],
[ ird*cos(lf0), ird*sin(lf0), h1],
[ ord*cos(lf1), ord*sin(lf1), h1],
[ ird*cos(lf2), ird*sin(lf2), h1],
[ 0,0,h2],
[ ord*cos(lf0), ord*sin(lf0), h2],
[ ird*cos(lf1), ird*sin(lf1), h2],
[ ord*cos(lf2), ord*sin(lf2), h2]
],
triangles=[
[0,1,2],[2,3,0],
[1,0,4],[4,0,7],[7,8,4],
[8,7,9],[10,9,7],
[10,7,6],[6,7,0],[3,6,0],
[2,1,4],[3,2,6],[10,6,9],[8,9,4],
[4,5,2],[2,5,6],[6,5,9],[9,5,4]
],
convexity=5);
}
}
}
module knurl_help()
{
echo();
echo(" Knurled Surface Library v2 ");
echo("");
echo(" Modules: ");
echo("");
echo(" knurled_cyl(parameters... ); - Requires a value for each an every expected parameter (see bellow) ");
echo("");
echo(" knurl(); - Call to the previous module with a set of default parameters, ");
echo(" values may be changed by adding 'parameter_name=value' i.e. knurl(s_smooth=40); ");
echo("");
echo(" Parameters, all of them in mm but the last one. ");
echo("");
echo(" k_cyl_hg - [ 12 ] ,, Height for the knurled cylinder ");
echo(" k_cyl_od - [ 25 ] ,, Cylinder's Outer Diameter before applying the knurled surfacefinishing. ");
echo(" knurl_wd - [ 3 ] ,, Knurl's Width. ");
echo(" knurl_hg - [ 4 ] ,, Knurl's Height. ");
echo(" knurl_dp - [ 1.5 ] ,, Knurl's Depth. ");
echo(" e_smooth - [ 2 ] ,, Bevel's Height at the bottom and the top of the cylinder ");
echo(" s_smooth - [ 0 ] ,, Knurl's Surface Smoothing : File donwn the top of the knurl this value, i.e. 40 will snooth it a 40%. ");
echo("");
}