 Matt McWilliams
|
9b34b4e026
|
Adjust the height of the mount (-14.5mm) and make bolt voids larger
|
2023-01-02 14:33:16 -05:00 |
|
Matt McWilliams
|
95612c1d18
|
Add m3 nuts
|
2023-01-02 14:30:54 -05:00 |
|
Matt McWilliams
|
0829ec9081
|
Use a variable
|
2023-01-02 13:53:41 -05:00 |
|
Matt McWilliams
|
ef0d246901
|
Increase the inner diameter of the bellows board to allow the threads to pass through cleanly and be held in place by the screw
|
2023-01-02 13:53:30 -05:00 |
|
Matt McWilliams
|
925659ba4b
|
Create an Arri S mount for the JK rails
|
2023-01-01 11:43:21 -05:00 |
|
Matt McWilliams
|
20c9287ac2
|
Work on concept JK lens assembly
|
2022-12-24 17:36:25 -05:00 |
|
Matt McWilliams
|
8aaa2b8940
|
Add a concept JK lens assembly
|
2022-12-24 01:55:11 -05:00 |
|
Matt McWilliams
|
30bd35e21d
|
Add an M4 nut to the common OpenSCAD lib
|
2022-12-24 01:54:57 -05:00 |
Matthew McWilliams
|
0c2e39f0b2
|
Arri bellows work
|
2022-12-23 23:01:37 -05:00 |
|
Matt McWilliams
|
ee1e9c9feb
|
Stepper firmware is working. Needed extra tape around coupling connector to add friction to connection and now it keeps.
|
2022-11-04 19:37:11 -04:00 |
|
Matt McWilliams
|
fcb77232ec
|
Create the driveCoupling module for the stepper motor design
|
2022-10-30 12:14:25 -04:00 |
|
Matt McWilliams
|
1fcbec7466
|
Work on stepper motor design and software. Motor still moves more slowly than it should but will investigate multiple factors leading to this result
|
2022-10-28 19:46:02 -04:00 |
|
Matt McWilliams
|
bb5b7c7897
|
Add divot to the drive coupling
|
2022-10-28 07:44:19 -04:00 |
|
Matt McWilliams
|
42b3aa767d
|
Allow for even more space for microswritch
|
2022-10-28 01:32:58 -04:00 |
|
Matt McWilliams
|
b20a6084e6
|
Allow for more space for the microswitch
|
2022-10-27 18:10:13 -04:00 |
|
Matthew McWilliams
|
d9a8576701
|
Adjust size of drive coupling for the DC connector
|
2022-10-21 16:05:56 -04:00 |
|
Matthew McWilliams
|
69273d2a1c
|
Increase scale of motor shaft void by 5%
|
2022-10-21 15:26:17 -04:00 |
|
Matthew McWilliams
|
755ea757f7
|
Add set screw for bearing and counter sink bolt caps for other cap m3s
|
2022-10-21 15:24:21 -04:00 |
|
Matt McWilliams
|
81fc54af8d
|
DC motor design has all components designed, need to print, test and adjust.
|
2022-10-19 06:38:56 -04:00 |
|
Matt McWilliams
|
4281ca4390
|
Work on Arri-S DC motor
|
2022-10-16 19:03:02 -04:00 |
|
Matt McWilliams
|
3419172535
|
Arri-S work
|
2022-10-15 00:13:05 -04:00 |
|
Matt McWilliams
|
206c266b08
|
Added Arri-S motor and cap measurements as taken 10/8/2022
|
2022-10-09 11:22:12 -04:00 |
|
Matthew McWilliams
|
5026cf869f
|
Arri-S work
|
2022-10-07 19:47:56 -04:00 |
|
Matt McWilliams
|
1964d6002d
|
Add mono logo as png, but might use svg instead. Render crashed PC.
|
2022-07-22 21:56:43 -04:00 |
|
Matt McWilliams
|
ea055d6e56
|
Capper case candidate
|
2022-07-13 23:04:00 -04:00 |
|
Matthew McWilliams
|
bc48765b35
|
Start work on base
|
2022-07-13 18:16:43 -04:00 |
Matthew McWilliams
|
70c2c695f0
|
All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity.
|
2022-07-13 15:21:26 -04:00 |
|
Matthew McWilliams
|
c33c6e24f6
|
Work on motor rod
|
2022-07-13 09:01:25 -04:00 |
|
Matt McWilliams
|
2924efe39f
|
Reduce the size of the void for the screw in the cap.
|
2022-06-28 08:34:29 -04:00 |
|
Matt McWilliams
|
e275539fb0
|
Remove endstop completely and start rounding surfaces.
|
2022-06-22 07:45:01 -04:00 |
|
Matt McWilliams
|
4c13c54815
|
Updates to endstop mount design. Had incorrectly positioned voids for SMD chips on the endstop
|
2022-06-20 13:00:40 -04:00 |
|
Matt McWilliams
|
62a66f5f6d
|
More mount work and start of endstop logic. Rebuilding the B&H projector unity.
|
2022-06-17 23:39:19 -04:00 |
|
Matt McWilliams
|
3a435933e3
|
Work on the opto endstop mount. This needs to be re-oriented before next print.
|
2022-06-16 00:29:31 -04:00 |
|
Matt McWilliams
|
78f7ac0e68
|
Mount work
|
2022-06-13 22:46:23 -04:00 |
|
Matt McWilliams
|
04a0330327
|
All work on first draft of capper hardware
|
2022-06-12 22:26:03 -04:00 |
|
Matt McWilliams
|
2f9201716a
|
All capper work. Debug firmware for testing. STL of cap as printed.
|
2022-06-12 13:14:43 -04:00 |
|
Matt McWilliams
|
818c8453ee
|
Capper OpenSCAD work
|
2022-06-11 16:03:08 -04:00 |
|
Matt McWilliams
|
9d3bf24627
|
Hardware ideas for capper mount and flag. Need to model servo and add places for endstops
|
2022-06-07 07:55:47 -04:00 |
|
Matt McWilliams
|
b3bb07454f
|
Add a lamp housing knob
|
2021-04-05 10:40:50 -04:00 |
|
Matt McWilliams
|
6fee5a803c
|
connector case box
|
2021-03-19 21:32:53 -04:00 |
|
Matt McWilliams
|
2c8eabeffd
|
3D printable panel for the Oxberry control box.
|
2021-02-22 13:24:18 -05:00 |
sixteenmillimeter
|
d501623290
|
Updated projector knob for printing
|
2020-08-18 14:20:15 -04:00 |
|
sixteenmillimeter
|
0ccb29dfb0
|
Shape for the friction knob on the JK 106 projection system.
|
2020-08-10 23:52:54 -04:00 |
 mmcwilliams
|
b702929e1f
|
cases work
|
2020-07-07 11:54:20 -04:00 |
|
sixteenmillimeter
|
d042381293
|
Projector work
|
2020-07-07 11:54:01 -04:00 |
|
sixteenmillimeter
|
53e012018f
|
JK projector WIP
|
2020-07-01 18:04:17 -04:00 |
|
sixteenmillimeter
|
420a3fbd50
|
Sequencer case
|
2020-07-01 18:04:10 -04:00 |
|
sixteenmillimeter
|
5258fcbf30
|
Rails work
|
2020-07-01 18:04:03 -04:00 |
|
sixteenmillimeter
|
4db3ce8b88
|
jk camera controller case
|
2020-07-01 18:03:40 -04:00 |
|
mmcwilliams
|
f4eb066725
|
camera conjtroller mod work
|
2020-05-27 16:47:14 -04:00 |
|
mmcwilliams
|
867d6a4069
|
Update cases
|
2019-05-06 13:24:40 -04:00 |
|
mmcwilliams
|
f33dbb2f1b
|
Enlarge box
|
2019-05-06 13:24:40 -04:00 |
|
mmcwilliams
|
4f9de487cc
|
Move all scad files into scad dir
|
2019-04-24 14:06:35 -04:00 |
|
mmcwilliams
|
f2c2d6ce43
|
WIP wednesday
|
2019-03-20 18:37:00 -04:00 |
|
mmcwilliams
|
1d993b85d3
|
Create a scad file for extra odds and ends for the JK
|
2019-03-18 18:28:09 -04:00 |
|
mmcwilliams
|
74b326caeb
|
Add ANYEYE scad work. Contains the motor key for connecting the INTVAL2/3 style motor mount and microswitch to a Revere 16mm projector.
|
2019-03-18 16:49:00 -04:00 |
|
mmcwilliams
|
7398f7993d
|
Start work on secondary projector feature
|
2019-02-25 18:14:29 -05:00 |
|
mmcw-dev
|
e8e3d821fa
|
Reduce diameter of the bellows board bolt
|
2018-02-15 14:54:00 -05:00 |
|
mmcw-dev
|
1ae6672957
|
Mcopy light mount improved.
|
2018-02-01 14:00:42 -05:00 |
|
mmcw-dev
|
298964c678
|
light spacing tested
|
2018-01-18 23:49:22 -05:00 |
|
mmcw-dev
|
5003654629
|
Diffuser insert improved based on tests.
|
2018-01-18 23:26:27 -05:00 |
|
mmcw-dev
|
489df48c17
|
The arbitrary mount allows the diffuser mount to slide along a horizontal axis.
|
2018-01-18 13:49:04 -05:00 |
|
mmcw-dev
|
51151ea9fe
|
Diffuser mount made for adjusting distance
|
2018-01-18 12:20:24 -05:00 |
|
mmcwilliams
|
36329fe34e
|
Add the jk.scad work for modifying the JK-103
|
2018-01-17 18:10:12 -05:00 |
|
mmcw-dev
|
9993631353
|
Add light module for 35mm fan
|
2018-01-16 09:54:23 -05:00 |
|
mmcw-dev
|
1a42f260fe
|
Add the experimental "fresnel" pattern generator for laser cutting. The hypothesis is that by melting the surface of an acrylic sheet, light from the LED source will be better projected forward onto the surface of the diffuser sheet.
|
2018-01-16 00:57:20 -05:00 |
|
mmcw-dev
|
234b2b89dc
|
The light is ready to print with an arbitrary stand for the bell and howell projector.
|
2018-01-15 22:59:48 -05:00 |
|
mmcw-dev
|
2934e70bd1
|
Light mount ready for printing with impromptu mount
|
2018-01-15 22:19:26 -05:00 |
|
mmcw-dev
|
e0af07c52c
|
Light and lens work
|
2018-01-15 21:17:19 -05:00 |
|
mmcw-dev
|
cef1c1fd93
|
All work to date on hardware. Made connectors, started carriage and re-started light.
|
2018-01-02 01:13:09 -05:00 |
|
mmcwilliams
|
f9a3f05118
|
Add prism module to potentially use [this prism](http://amzn.to/2ChhcNy) in the design of a light with 3 [Adafruit Pixies](https://www.adafruit.com/product/2741), 9W at max. Potentially a stupid idea, but should be explored.
|
2017-12-31 00:54:09 -05:00 |
|
mmcw-dev
|
38d6409343
|
Openscad progress, made carriage, set up plates
|
2017-12-28 23:34:04 -05:00 |
|
mmcw-dev
|
e32b9a8a2e
|
Include development work from previous projects. Create an "mcopy.scad" file for laying out all parts in a single space (for renders).
|
2017-12-28 21:08:58 -05:00 |
|
mmcw-dev
|
5a842f89c9
|
Multi-part jk103 connector.
|
2017-12-28 20:24:49 -05:00 |
|
mmcw-dev
|
ee081160b7
|
V1 of the jk connector, split into 2 parts to be assembled and attached.
|
2017-12-27 22:23:37 -05:00 |
|
mmcw-dev
|
8832a60949
|
Add camera mount for attaching to bellows plate.
|
2017-12-27 22:22:21 -05:00 |
|
mmcw-dev
|
bc50941746
|
Create bellows hardware, cmount interface to bellows
|
2017-12-21 00:19:29 -05:00 |
|
Matt McWilliams
|
f4167de6c7
|
Add arduino mount and pins libraries
These will be used in the mcopy hardware designs
|
2016-05-04 17:28:53 -04:00 |
Matt
|
600f3c37c4
|
Add knurling library
|
2016-04-11 00:45:13 -04:00 |