 Matt McWilliams
|
98f2c7a24a
|
Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.
|
2022-10-28 11:28:30 -04:00 |
|
Matt McWilliams
|
787e6ed06e
|
Add a concept arri_s camera controller firmware. Using class-based approach as an experiment in Arduino code structure.
|
2022-10-28 07:50:30 -04:00 |
|
Matt McWilliams
|
f55b72044c
|
Mcopy firmware with optional capper feature
|
2022-07-17 11:05:20 -04:00 |
|
Matt McWilliams
|
6582154ec6
|
Fix debug script and component
|
2022-07-17 09:56:03 -04:00 |
Matthew McWilliams
|
18dbb72a54
|
Minor updates to comments
|
2022-07-06 14:42:53 -04:00 |
|
Matthew McWilliams
|
c0ec81c0f9
|
Add Servo debug script
|
2022-07-06 14:42:16 -04:00 |
|
Matt McWilliams
|
c3661d6ff1
|
Remove opto endstop logic, ready for hardware testing.
|
2022-06-28 08:58:31 -04:00 |
|
Matt McWilliams
|
62a66f5f6d
|
More mount work and start of endstop logic. Rebuilding the B&H projector unity.
|
2022-06-17 23:39:19 -04:00 |
|
Matt McWilliams
|
28dc19fc32
|
Work on endstop functionality
|
2022-06-13 22:46:13 -04:00 |
|
Matt McWilliams
|
585c47d6c7
|
Allow capper identifier in list of acceptable responses.
|
2022-06-13 08:08:42 -04:00 |
|
Matt McWilliams
|
04a0330327
|
All work on first draft of capper hardware
|
2022-06-12 22:26:03 -04:00 |
|
Matt McWilliams
|
2f9201716a
|
All capper work. Debug firmware for testing. STL of cap as printed.
|
2022-06-12 13:14:43 -04:00 |
|
Matthew McWilliams
|
f7a3c52260
|
Silly typo: did not invoke Servo_init() and so servo was not initalizing
|
2022-06-10 13:19:38 -04:00 |
|
Matt McWilliams
|
c77201ef4e
|
Add new commands and identifiers for the capper, start moving into capital characters
|
2022-06-07 07:55:26 -04:00 |
|
Matt McWilliams
|
2861bc52fd
|
intval2 connector firmware
|
2021-03-19 14:09:46 -04:00 |
sixteenmillimeter
|
eb7e62aac7
|
Fixed projector function
|
2020-10-03 21:32:16 -04:00 |
|
sixteenmillimeter
|
65292524b1
|
Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)
|
2020-09-29 15:13:22 -04:00 |
|
sixteenmillimeter
|
5e481e77b0
|
Addressing the issue with the JKMM99 projector functionality where frames stop prematurely. Conceivably, the proj_microswitch() function is the only place that calls proj_stop() so the issue is with the logic there. It makes little sense that this function allows for 15ms frames because of the test that requires a 450ms elapsed time before it is stopped.
|
2020-09-29 14:00:54 -04:00 |
|
sixteenmillimeter
|
c5d7f9c91f
|
Re-write of the JKMM99 which replaces the relay-based camera controller with an intval-based one. This relies on the Arduino Uno in the control box to handle all of the control logic in place of an on-board Arduino Trinket Pro.
|
2020-09-28 23:49:57 -04:00 |
|
sixteenmillimeter
|
9502d255c7
|
Fixed typo in Pins() where PROJECTOR_FWD was set to LOW twice instead of PROJECTOR_BWD.
|
2020-09-28 23:47:36 -04:00 |
|
sixteenmillimeter
|
08c3c23da0
|
Firmware for new JKMM99. Deployed for testing.
|
2020-08-18 14:21:27 -04:00 |
|
sixteenmillimeter
|
dd1bec8394
|
Firmware for controlling the JK 106 projector with a 103/104-style camera
|
2020-08-09 20:04:26 -04:00 |
|
sixteenmillimeter
|
67d0e750c2
|
Mcopy camera firmware
|
2020-07-01 18:03:20 -04:00 |
|
sixteenmillimeter
|
ed75924e24
|
Filmout release 1.5.0.
|
2020-01-20 01:37:38 -05:00 |
|
sixteenmillimeter
|
6ec81a3429
|
Timing tweaks for Oxberry firmware. Successfully ran 2000 frames with these settings.
|
2019-12-18 13:48:33 -05:00 |
|
sixteenmillimeter
|
09da9500b5
|
Oxberry camera firmware.
|
2019-12-17 14:54:01 -05:00 |
 mmcwilliams
|
7a52bc7c6e
|
Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.
|
2019-04-04 18:49:07 -04:00 |
|
mmcwilliams
|
f276d5ce83
|
Add commands for controlling a secondary projector.
|
2019-03-01 20:14:20 -05:00 |
|
mmcwilliams
|
46ce99ec18
|
Add an alternate camera firmware for MONO NO AWARE's JK.
|
2019-03-01 18:01:45 -05:00 |
|
mmcwilliams
|
ac888b1fc4
|
Firmware first drafts for MONO NO AWARE optical printer
|
2019-02-28 17:50:39 -05:00 |
|
mmcwilliams
|
b98b831ae4
|
Fix projector_second component code.
|
2019-02-26 16:42:04 -05:00 |
|
mmcwilliams
|
7398f7993d
|
Start work on secondary projector feature
|
2019-02-25 18:14:29 -05:00 |
|
mmcw-dev
|
b6a6b8a81e
|
Reverse High/low for relay
|
2019-02-09 09:30:11 -05:00 |
|
mmcwilliams
|
d31d7770aa
|
Turn off light after delay
|
2019-02-08 14:29:13 -05:00 |
|
mmcwilliams
|
74bb33052c
|
Create an mcopy component for cameras that are triggered by relay, ie DSLRs and intvals.
|
2019-02-08 12:58:14 -05:00 |
|
mmcwilliams
|
95007d06a2
|
Install libs from intval_go_node project
|
2019-02-08 12:46:58 -05:00 |
|
mmcwilliams
|
448ad1bda4
|
Momentary switch delay was too long.
|
2018-07-03 14:25:36 -04:00 |
|
mmcwilliams
|
4aa44576b3
|
Set brightness and alternatively log the rgb
|
2018-02-01 14:56:09 -05:00 |
|
M McWilliams
|
9bbf2393b7
|
Adjust timings in the jkfirmware
|
2018-01-30 05:05:04 -05:00 |
|
mmcw-dev
|
e3d6144abd
|
Solid state relay version of the mcopy jk firmware
|
2018-01-22 22:05:10 -05:00 |
|
mmcwilliams
|
695a289bdb
|
Settings, intval and mcopyJK firmware work.
|
2018-01-17 12:24:59 -05:00 |
|
mmcwilliams
|
f671967c18
|
Improve the serial test by comparing a character type
|
2018-01-09 23:24:09 -05:00 |
|
mmcw-dev
|
c8c083054e
|
First version of the mcopy_jk firmware for the JK103 that is being refurbished at AgX.
|
2018-01-05 15:49:19 -05:00 |
|
mmcw-dev
|
324386096a
|
Projector component needs a cmd_mcopy_identifier function to tell gui app that it's an arduino.
|
2018-01-05 15:48:50 -05:00 |
|
mmcw-dev
|
2301f0aa43
|
Started mcopy_jk firmware, based off the old mcopyJK project. Will have to trigger relays to start events. Will also have to add previous absent feature of tracking the jk state via the internam microswitches.
|
2018-01-04 23:45:40 -05:00 |
|
mmcw-dev
|
fa10ee6785
|
Test device with adafruit pixie
|
2018-01-02 01:15:45 -05:00 |
|
mmcw-dev
|
ed1a0902aa
|
Add working projector functions to mcopy_projector_jk
|
2017-12-28 20:54:54 -05:00 |
|
mmcw-dev
|
674dc9591e
|
Switch pixie to neopixel code in mcopy_projector_tests
|
2017-12-28 20:54:19 -05:00 |
|
mmcw-dev
|
4ffd0a7daa
|
Update projector and projector_tests to use distinguishing identifiers from new expanded list.
|
2017-12-28 18:32:03 -05:00 |
|
mmcw-dev
|
3efdba9ec4
|
Add wiring instructions to mcopy_light_tests
|
2017-12-28 18:31:10 -05:00 |