 Matt McWilliams
|
55b39e7db3
|
Tweak to USB protector
|
2023-07-18 23:13:20 -04:00 |
|
Matt McWilliams
|
505a2a71e7
|
Add magnetic bellows models
|
2023-07-14 21:40:03 -04:00 |
|
Matt McWilliams
|
f47ea2d382
|
Work on rails ends
|
2023-07-10 23:07:32 -04:00 |
|
Matt McWilliams
|
621948fbac
|
Work on mcopy_rails concepts
|
2023-07-05 15:17:56 -04:00 |
Matthew McWilliams
|
6d379d284b
|
on site work at MONO
|
2023-07-01 16:34:07 -04:00 |
|
Matt McWilliams
|
3ec93ab3b1
|
work
|
2023-05-16 23:05:13 -04:00 |
|
Matt McWilliams
|
10c29d3af1
|
Add a set screw to the gate_key
|
2023-05-15 21:48:09 -04:00 |
|
Matt McWilliams
|
41840b90c8
|
Update gitsub
|
2023-05-15 12:36:03 -04:00 |
|
Matt McWilliams
|
c89e865d3d
|
Bearing needs slight gap to allow the inner bearing wheel to rotate freely
|
2023-05-14 21:17:20 -04:00 |
|
Matt McWilliams
|
c6ec54bd06
|
Flip projector panel to print
|
2023-05-14 21:01:46 -04:00 |
|
Matt McWilliams
|
af3b1b8cbb
|
Create first draft of projector panel redesign
|
2023-05-14 21:00:52 -04:00 |
|
Matt McWilliams
|
86273a9f09
|
Merge remote-tracking branch 'origin/canon_ble' into canon_ble
|
2023-05-02 23:58:39 -04:00 |
|
Matt McWilliams
|
ba0241a811
|
Update ESP32 case
|
2023-05-02 23:58:31 -04:00 |
|
Matt McWilliams
|
1bd73876b4
|
Add sprocketed roller module
|
2023-04-28 15:35:54 -04:00 |
|
Matt McWilliams
|
64faaa9427
|
Slight change to outer diameter.
|
2023-04-19 13:32:06 -04:00 |
|
Matt McWilliams
|
d44c67ce80
|
Update the lens board design
|
2023-04-19 13:31:47 -04:00 |
|
Matt McWilliams
|
d2390dca30
|
Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs
|
2023-04-16 23:33:11 -04:00 |
|
Matt McWilliams
|
503a8ec92f
|
Add magnets to bellows board design
|
2023-04-16 22:53:16 -04:00 |
|
Matt McWilliams
|
1f5bb85304
|
Correctly reference LEDs
|
2023-04-11 22:39:44 -04:00 |
|
Matt McWilliams
|
9e7990851e
|
Case design work
|
2023-04-10 21:04:01 -04:00 |
|
Matt McWilliams
|
c1a51f1ce8
|
Canon EF bellows adapter
|
2023-04-01 19:24:29 -04:00 |
|
Matt McWilliams
|
13702a3d5b
|
Add a canon_EF_body_cap script
|
2023-03-30 20:15:43 -04:00 |
|
Matt McWilliams
|
6b66cfe03f
|
Add bolt voids to canon mount
|
2023-03-29 22:47:49 -04:00 |
|
Matt McWilliams
|
cbc876c57c
|
Case ready for production
|
2023-03-29 21:58:03 -04:00 |
|
Matt McWilliams
|
7813a8c904
|
First draft of Rebel case
|
2023-03-28 19:41:35 -04:00 |
|
Matt McWilliams
|
5f941e91b5
|
Add conecpt for arduino nano case
|
2023-03-26 20:19:15 -04:00 |
|
Matt McWilliams
|
d262ed418d
|
Add base to socket connector.
|
2023-03-26 20:19:00 -04:00 |
|
Matt McWilliams
|
2e9db4d667
|
Connector size is working
|
2023-03-26 18:53:01 -04:00 |
|
Matt McWilliams
|
bd9317dd8f
|
Adjust angles. Make $fn configurable (crashing the GUI on my desktop).
|
2023-03-26 17:53:26 -04:00 |
|
Matt McWilliams
|
1528dec668
|
Rename bellows adapter
|
2023-03-24 13:51:29 -04:00 |
|
Matt McWilliams
|
5c6b9191e5
|
Work in progress: Serial does not work from external library
|
2023-03-20 19:45:32 -04:00 |
|
Matt McWilliams
|
fbe954280f
|
Socket connector work
|
2023-03-18 17:00:02 -04:00 |
|
Matt McWilliams
|
790ea3d551
|
Add guides for collar flanges
|
2023-03-15 22:11:48 -04:00 |
|
Matt McWilliams
|
c6b8592490
|
Enlarge case and add bolt
|
2023-03-15 21:35:35 -04:00 |
|
Matt McWilliams
|
f67e011d5e
|
Canon EOS M50 mount design
|
2023-03-15 21:35:23 -04:00 |
|
Matt McWilliams
|
a4bc54482d
|
Work on canon mount
|
2023-03-15 19:22:18 -04:00 |
|
Matt McWilliams
|
be50eb6fcf
|
Work on ESP32 case and CPC socket
|
2023-03-14 21:45:18 -04:00 |
|
Matt McWilliams
|
a7d784583a
|
Case for an ESP32 dev board (Inland, Microcenter)
|
2023-03-13 17:46:38 -04:00 |
|
Matt McWilliams
|
7af1f739e4
|
Canon EF M bellows mount
|
2023-03-13 17:46:21 -04:00 |
|
Matt McWilliams
|
3e247703a8
|
More CPC connector work
|
2023-03-13 17:45:50 -04:00 |
|
Matt McWilliams
|
c7e338ebff
|
projector electronics improvements, move arduino mount, increase size, adjust resistor mount
|
2023-03-12 21:28:29 -04:00 |
|
Matt McWilliams
|
cc2af435d5
|
First pass at esp32 case
|
2023-03-12 17:55:09 -04:00 |
|
Matt McWilliams
|
87695b173d
|
First pass at projector controller design and refactor of sequencer case.
|
2023-03-12 16:36:16 -04:00 |
|
Matt McWilliams
|
346c303edb
|
First pass at connector plug
|
2023-03-08 16:01:02 -05:00 |
|
Matt McWilliams
|
908fe52ad8
|
Simplify projector_controller.scad
|
2023-03-05 17:14:01 -05:00 |
|
Matt McWilliams
|
3fd1e47b7b
|
Rename sleeve to collar
|
2023-03-05 17:13:42 -05:00 |
|
Matt McWilliams
|
2047ce4f76
|
cpc connector work
|
2023-03-05 00:28:39 -05:00 |
|
Matt McWilliams
|
3ef56cab21
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
|
Matt McWilliams
|
6b77b98aad
|
Add more files to scad.sh
|
2023-03-04 20:00:01 -05:00 |
|
Matt McWilliams
|
211101cd6b
|
Add common SCAD lib. Add a script that compiles all scad files to stl (make is getting excessive). Canonicalize STL files after they're compiled.
|
2023-03-04 19:44:20 -05:00 |
|
Matt McWilliams
|
cff558ef9a
|
Add 15mm to mount void for camera bolt
|
2023-02-12 14:14:03 -05:00 |
|
Matt McWilliams
|
325837d93e
|
Adjustment to allow space on the right side
|
2023-02-12 14:10:44 -05:00 |
|
Matt McWilliams
|
135540b261
|
Remove some material for the rails
|
2023-02-03 20:08:18 -05:00 |
|
Matt McWilliams
|
49464cd25a
|
Finished the design of the lens assembly base z attachment
|
2023-02-02 19:48:30 -05:00 |
|
Matt McWilliams
|
d0fe54b429
|
Add m5 nut to the common lib
|
2023-02-02 19:48:08 -05:00 |
|
Matt McWilliams
|
2dce6f4b08
|
Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper
|
2023-01-31 11:52:13 -05:00 |
|
Matt McWilliams
|
99794d04c2
|
jk assembly and arri-s wip
|
2023-01-31 11:52:10 -05:00 |
|
Matt McWilliams
|
cc06655cd6
|
Update debug
|
2023-01-23 00:28:26 -05:00 |
|
Matt McWilliams
|
ab6f517d27
|
Rails work
|
2023-01-17 12:04:03 -05:00 |
|
Matt McWilliams
|
f127dc1128
|
Merge remote-tracking branch 'origin/capper' into capper
|
2023-01-14 15:26:07 -05:00 |
|
Matt McWilliams
|
0b816ae8e1
|
Adjust the position of the Z axis, move the linear bearing up and down to prevent binding on motion
|
2023-01-14 15:25:53 -05:00 |
|
Matt McWilliams
|
c600fea4e1
|
Start rails concept
|
2023-01-12 19:26:05 -05:00 |
|
Matt McWilliams
|
92067bdbef
|
Add top part to assembly
|
2023-01-11 19:17:15 -05:00 |
|
Matt McWilliams
|
c181e003a3
|
First draft of base
|
2023-01-07 18:43:59 -05:00 |
|
Matt McWilliams
|
597137670d
|
Merge base work with knob changes
|
2023-01-06 10:31:25 -05:00 |
|
Matt McWilliams
|
3036aebbc4
|
Knob and collar work
|
2023-01-06 09:18:03 -05:00 |
|
Matt McWilliams
|
cbe6477af2
|
Improvements to bearing and Tnut size
|
2023-01-05 17:35:25 -05:00 |
|
Matthew McWilliams
|
c2546d2bc5
|
Add m3 nuts and bolts to threaded z movement
|
2023-01-05 14:40:25 -05:00 |
|
Matt McWilliams
|
46be1bfd3b
|
Assembly work. Adjusted design to simplify placement of 2 linear bearings
|
2023-01-04 23:11:48 -05:00 |
|
Matt McWilliams
|
1029885047
|
Update threaded Z, still needs m3 bolts
|
2023-01-04 18:26:22 -05:00 |
|
Matt McWilliams
|
164bde8cce
|
All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch.
|
2023-01-03 21:16:19 -05:00 |
|
Matt McWilliams
|
41504caac9
|
Increase the bolt size on the bellows board
|
2023-01-02 17:11:44 -05:00 |
|
Matt McWilliams
|
9b34b4e026
|
Adjust the height of the mount (-14.5mm) and make bolt voids larger
|
2023-01-02 14:33:16 -05:00 |
|
Matt McWilliams
|
95612c1d18
|
Add m3 nuts
|
2023-01-02 14:30:54 -05:00 |
|
Matt McWilliams
|
0829ec9081
|
Use a variable
|
2023-01-02 13:53:41 -05:00 |
|
Matt McWilliams
|
ef0d246901
|
Increase the inner diameter of the bellows board to allow the threads to pass through cleanly and be held in place by the screw
|
2023-01-02 13:53:30 -05:00 |
|
Matt McWilliams
|
925659ba4b
|
Create an Arri S mount for the JK rails
|
2023-01-01 11:43:21 -05:00 |
|
Matt McWilliams
|
20c9287ac2
|
Work on concept JK lens assembly
|
2022-12-24 17:36:25 -05:00 |
|
Matt McWilliams
|
8aaa2b8940
|
Add a concept JK lens assembly
|
2022-12-24 01:55:11 -05:00 |
|
Matt McWilliams
|
30bd35e21d
|
Add an M4 nut to the common OpenSCAD lib
|
2022-12-24 01:54:57 -05:00 |
|
Matthew McWilliams
|
0c2e39f0b2
|
Arri bellows work
|
2022-12-23 23:01:37 -05:00 |
|
Matt McWilliams
|
ee1e9c9feb
|
Stepper firmware is working. Needed extra tape around coupling connector to add friction to connection and now it keeps.
|
2022-11-04 19:37:11 -04:00 |
|
Matt McWilliams
|
fcb77232ec
|
Create the driveCoupling module for the stepper motor design
|
2022-10-30 12:14:25 -04:00 |
|
Matt McWilliams
|
1fcbec7466
|
Work on stepper motor design and software. Motor still moves more slowly than it should but will investigate multiple factors leading to this result
|
2022-10-28 19:46:02 -04:00 |
|
Matt McWilliams
|
bb5b7c7897
|
Add divot to the drive coupling
|
2022-10-28 07:44:19 -04:00 |
|
Matt McWilliams
|
42b3aa767d
|
Allow for even more space for microswritch
|
2022-10-28 01:32:58 -04:00 |
|
Matt McWilliams
|
b20a6084e6
|
Allow for more space for the microswitch
|
2022-10-27 18:10:13 -04:00 |
|
Matthew McWilliams
|
d9a8576701
|
Adjust size of drive coupling for the DC connector
|
2022-10-21 16:05:56 -04:00 |
|
Matthew McWilliams
|
69273d2a1c
|
Increase scale of motor shaft void by 5%
|
2022-10-21 15:26:17 -04:00 |
|
Matthew McWilliams
|
755ea757f7
|
Add set screw for bearing and counter sink bolt caps for other cap m3s
|
2022-10-21 15:24:21 -04:00 |
|
Matt McWilliams
|
81fc54af8d
|
DC motor design has all components designed, need to print, test and adjust.
|
2022-10-19 06:38:56 -04:00 |
|
Matt McWilliams
|
4281ca4390
|
Work on Arri-S DC motor
|
2022-10-16 19:03:02 -04:00 |
|
Matt McWilliams
|
3419172535
|
Arri-S work
|
2022-10-15 00:13:05 -04:00 |
|
Matt McWilliams
|
206c266b08
|
Added Arri-S motor and cap measurements as taken 10/8/2022
|
2022-10-09 11:22:12 -04:00 |
|
Matthew McWilliams
|
5026cf869f
|
Arri-S work
|
2022-10-07 19:47:56 -04:00 |
|
Matt McWilliams
|
1964d6002d
|
Add mono logo as png, but might use svg instead. Render crashed PC.
|
2022-07-22 21:56:43 -04:00 |
|
Matt McWilliams
|
ea055d6e56
|
Capper case candidate
|
2022-07-13 23:04:00 -04:00 |
|
Matthew McWilliams
|
bc48765b35
|
Start work on base
|
2022-07-13 18:16:43 -04:00 |
Matthew McWilliams
|
70c2c695f0
|
All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity.
|
2022-07-13 15:21:26 -04:00 |
|
Matthew McWilliams
|
c33c6e24f6
|
Work on motor rod
|
2022-07-13 09:01:25 -04:00 |
|
Matt McWilliams
|
2924efe39f
|
Reduce the size of the void for the screw in the cap.
|
2022-06-28 08:34:29 -04:00 |
|
Matt McWilliams
|
e275539fb0
|
Remove endstop completely and start rounding surfaces.
|
2022-06-22 07:45:01 -04:00 |
|
Matt McWilliams
|
4c13c54815
|
Updates to endstop mount design. Had incorrectly positioned voids for SMD chips on the endstop
|
2022-06-20 13:00:40 -04:00 |
|
Matt McWilliams
|
62a66f5f6d
|
More mount work and start of endstop logic. Rebuilding the B&H projector unity.
|
2022-06-17 23:39:19 -04:00 |
|
Matt McWilliams
|
3a435933e3
|
Work on the opto endstop mount. This needs to be re-oriented before next print.
|
2022-06-16 00:29:31 -04:00 |
|
Matt McWilliams
|
78f7ac0e68
|
Mount work
|
2022-06-13 22:46:23 -04:00 |
|
Matt McWilliams
|
04a0330327
|
All work on first draft of capper hardware
|
2022-06-12 22:26:03 -04:00 |
|
Matt McWilliams
|
2f9201716a
|
All capper work. Debug firmware for testing. STL of cap as printed.
|
2022-06-12 13:14:43 -04:00 |
|
Matt McWilliams
|
818c8453ee
|
Capper OpenSCAD work
|
2022-06-11 16:03:08 -04:00 |
|
Matt McWilliams
|
9d3bf24627
|
Hardware ideas for capper mount and flag. Need to model servo and add places for endstops
|
2022-06-07 07:55:47 -04:00 |
|
Matt McWilliams
|
b3bb07454f
|
Add a lamp housing knob
|
2021-04-05 10:40:50 -04:00 |
|
Matt McWilliams
|
6fee5a803c
|
connector case box
|
2021-03-19 21:32:53 -04:00 |
|
Matt McWilliams
|
2c8eabeffd
|
3D printable panel for the Oxberry control box.
|
2021-02-22 13:24:18 -05:00 |
sixteenmillimeter
|
d501623290
|
Updated projector knob for printing
|
2020-08-18 14:20:15 -04:00 |
|
sixteenmillimeter
|
0ccb29dfb0
|
Shape for the friction knob on the JK 106 projection system.
|
2020-08-10 23:52:54 -04:00 |
 mmcwilliams
|
b702929e1f
|
cases work
|
2020-07-07 11:54:20 -04:00 |
|
sixteenmillimeter
|
d042381293
|
Projector work
|
2020-07-07 11:54:01 -04:00 |
|
sixteenmillimeter
|
53e012018f
|
JK projector WIP
|
2020-07-01 18:04:17 -04:00 |
|
sixteenmillimeter
|
420a3fbd50
|
Sequencer case
|
2020-07-01 18:04:10 -04:00 |
|
sixteenmillimeter
|
5258fcbf30
|
Rails work
|
2020-07-01 18:04:03 -04:00 |
|
sixteenmillimeter
|
4db3ce8b88
|
jk camera controller case
|
2020-07-01 18:03:40 -04:00 |
|
mmcwilliams
|
f4eb066725
|
camera conjtroller mod work
|
2020-05-27 16:47:14 -04:00 |
|
mmcwilliams
|
867d6a4069
|
Update cases
|
2019-05-06 13:24:40 -04:00 |
|
mmcwilliams
|
f33dbb2f1b
|
Enlarge box
|
2019-05-06 13:24:40 -04:00 |
|
mmcwilliams
|
4f9de487cc
|
Move all scad files into scad dir
|
2019-04-24 14:06:35 -04:00 |
|
mmcwilliams
|
f2c2d6ce43
|
WIP wednesday
|
2019-03-20 18:37:00 -04:00 |
|
mmcwilliams
|
1d993b85d3
|
Create a scad file for extra odds and ends for the JK
|
2019-03-18 18:28:09 -04:00 |
|
mmcwilliams
|
74b326caeb
|
Add ANYEYE scad work. Contains the motor key for connecting the INTVAL2/3 style motor mount and microswitch to a Revere 16mm projector.
|
2019-03-18 16:49:00 -04:00 |
|
mmcwilliams
|
7398f7993d
|
Start work on secondary projector feature
|
2019-02-25 18:14:29 -05:00 |
|
mmcw-dev
|
e8e3d821fa
|
Reduce diameter of the bellows board bolt
|
2018-02-15 14:54:00 -05:00 |
|
mmcw-dev
|
1ae6672957
|
Mcopy light mount improved.
|
2018-02-01 14:00:42 -05:00 |
|
mmcw-dev
|
298964c678
|
light spacing tested
|
2018-01-18 23:49:22 -05:00 |
|
mmcw-dev
|
5003654629
|
Diffuser insert improved based on tests.
|
2018-01-18 23:26:27 -05:00 |
|
mmcw-dev
|
489df48c17
|
The arbitrary mount allows the diffuser mount to slide along a horizontal axis.
|
2018-01-18 13:49:04 -05:00 |
|
mmcw-dev
|
51151ea9fe
|
Diffuser mount made for adjusting distance
|
2018-01-18 12:20:24 -05:00 |
|
mmcwilliams
|
36329fe34e
|
Add the jk.scad work for modifying the JK-103
|
2018-01-17 18:10:12 -05:00 |
|
mmcw-dev
|
9993631353
|
Add light module for 35mm fan
|
2018-01-16 09:54:23 -05:00 |
|
mmcw-dev
|
1a42f260fe
|
Add the experimental "fresnel" pattern generator for laser cutting. The hypothesis is that by melting the surface of an acrylic sheet, light from the LED source will be better projected forward onto the surface of the diffuser sheet.
|
2018-01-16 00:57:20 -05:00 |
|
mmcw-dev
|
234b2b89dc
|
The light is ready to print with an arbitrary stand for the bell and howell projector.
|
2018-01-15 22:59:48 -05:00 |
|
mmcw-dev
|
2934e70bd1
|
Light mount ready for printing with impromptu mount
|
2018-01-15 22:19:26 -05:00 |
|
mmcw-dev
|
e0af07c52c
|
Light and lens work
|
2018-01-15 21:17:19 -05:00 |
|
mmcw-dev
|
cef1c1fd93
|
All work to date on hardware. Made connectors, started carriage and re-started light.
|
2018-01-02 01:13:09 -05:00 |
|
mmcwilliams
|
f9a3f05118
|
Add prism module to potentially use [this prism](http://amzn.to/2ChhcNy) in the design of a light with 3 [Adafruit Pixies](https://www.adafruit.com/product/2741), 9W at max. Potentially a stupid idea, but should be explored.
|
2017-12-31 00:54:09 -05:00 |
|
mmcw-dev
|
38d6409343
|
Openscad progress, made carriage, set up plates
|
2017-12-28 23:34:04 -05:00 |
|
mmcw-dev
|
e32b9a8a2e
|
Include development work from previous projects. Create an "mcopy.scad" file for laying out all parts in a single space (for renders).
|
2017-12-28 21:08:58 -05:00 |
|
mmcw-dev
|
5a842f89c9
|
Multi-part jk103 connector.
|
2017-12-28 20:24:49 -05:00 |
|
mmcw-dev
|
ee081160b7
|
V1 of the jk connector, split into 2 parts to be assembled and attached.
|
2017-12-27 22:23:37 -05:00 |
|
mmcw-dev
|
8832a60949
|
Add camera mount for attaching to bellows plate.
|
2017-12-27 22:22:21 -05:00 |
|
mmcw-dev
|
bc50941746
|
Create bellows hardware, cmount interface to bellows
|
2017-12-21 00:19:29 -05:00 |
|
Matt McWilliams
|
f4167de6c7
|
Add arduino mount and pins libraries
These will be used in the mcopy hardware designs
|
2016-05-04 17:28:53 -04:00 |