mcopy/scad
Matt McWilliams 3a435933e3 Work on the opto endstop mount. This needs to be re-oriented before next print. 2022-06-16 00:29:31 -04:00
..
2020_profile.scad Rails work 2020-07-01 18:04:03 -04:00
anyeye_revere.scad Add ANYEYE scad work. Contains the motor key for connecting the INTVAL2/3 style motor mount and microswitch to a Revere 16mm projector. 2019-03-18 16:49:00 -04:00
arduino.scad Add arduino mount and pins libraries 2016-05-04 17:28:53 -04:00
arduino_sainsmart8_case.scad Update cases 2019-05-06 13:24:40 -04:00
arduino_sainsmart8_sainsmart4_case.scad Update cases 2019-05-06 13:24:40 -04:00
bellows.scad Reduce diameter of the bellows board bolt 2018-02-15 14:54:00 -05:00
box_laser.scad Move all scad files into scad dir 2019-04-24 14:06:35 -04:00
camera_controller_mod.scad cases work 2020-07-07 11:54:20 -04:00
capper.scad Work on the opto endstop mount. This needs to be re-oriented before next print. 2022-06-16 00:29:31 -04:00
carriage.scad All work to date on hardware. Made connectors, started carriage and re-started light. 2018-01-02 01:13:09 -05:00
common.scad All work on first draft of capper hardware 2022-06-12 22:26:03 -04:00
connectors.scad Start work on secondary projector feature 2019-02-25 18:14:29 -05:00
dc_plug_cheat.scad cases work 2020-07-07 11:54:20 -04:00
intval2_connector_case.scad connector case box 2021-03-19 21:32:53 -04:00
jk.scad Add the jk.scad work for modifying the JK-103 2018-01-17 18:10:12 -05:00
jk_camera_controller_mod.scad jk camera controller case 2020-07-01 18:03:40 -04:00
jk_extras.scad WIP wednesday 2019-03-20 18:37:00 -04:00
jk_lamp_housing_knob.scad Add a lamp housing knob 2021-04-05 10:40:50 -04:00
jk_projector.scad Projector work 2020-07-07 11:54:01 -04:00
jk_projector_knob.scad Updated projector knob for printing 2020-08-18 14:20:15 -04:00
knurledFinishLib_v2.scad Add knurling library 2016-04-11 00:45:13 -04:00
lens.scad Light and lens work 2018-01-15 21:17:19 -05:00
light.scad Mcopy light mount improved. 2018-02-01 14:00:42 -05:00
mcopy.scad Mcopy light mount improved. 2018-02-01 14:00:42 -05:00
motor.scad Add the experimental "fresnel" pattern generator for laser cutting. The hypothesis is that by melting the surface of an acrylic sheet, light from the LED source will be better projected forward onto the surface of the diffuser sheet. 2018-01-16 00:57:20 -05:00
oxberry_control_panel.scad 3D printable panel for the Oxberry control box. 2021-02-22 13:24:18 -05:00
pins.scad Add arduino mount and pins libraries 2016-05-04 17:28:53 -04:00
plates.scad All work to date on hardware. Made connectors, started carriage and re-started light. 2018-01-02 01:13:09 -05:00
rails_2020.scad Rails work 2020-07-01 18:04:03 -04:00
sequencer_case.scad Sequencer case 2020-07-01 18:04:10 -04:00