.. |
components
|
Update McopySerial usage in both scripts that use it.
|
2023-03-21 20:38:45 -04:00 |
intval2_connector_firmware
|
intval2 connector firmware
|
2021-03-19 14:09:46 -04:00 |
lib/McopySerial
|
Fixed issue with baud being stored as const overflowed. Silly mistake.
|
2023-03-21 20:35:00 -04:00 |
mcopy_JKMM99
|
Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)
|
2020-09-29 15:13:22 -04:00 |
mcopy_JKMM99_intval
|
Fixed projector function
|
2020-10-03 21:32:16 -04:00 |
mcopy_JKMM100
|
Correctly reference LEDs
|
2023-04-11 22:39:44 -04:00 |
mcopy_arri_s_DC_firmware
|
Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.
|
2022-10-28 11:28:30 -04:00 |
mcopy_arri_s_firmware
|
Use variable in stepper declaration
|
2022-11-11 15:47:58 -05:00 |
mcopy_cam_canon_ble
|
Rename mcopy_cam_canon to mcopy_cam_canon_ble to differentiate
|
2023-04-11 00:28:27 -04:00 |
mcopy_cam_firmware
|
Mcopy camera firmware
|
2020-07-01 18:03:20 -04:00 |
mcopy_cam_relay
|
Complete the mcopy relay sketch without variable exposure.
|
2023-04-11 01:13:44 -04:00 |
mcopy_firmware
|
Solid state relay version of the mcopy jk firmware
|
2018-01-22 22:05:10 -05:00 |
mcopy_jk_firmware
|
Momentary switch delay was too long.
|
2018-07-03 14:25:36 -04:00 |
mcopy_mono_firmware_camera
|
Add commands for controlling a secondary projector.
|
2019-03-01 20:14:20 -05:00 |
mcopy_mono_firmware_camera_bolex
|
Add an alternate camera firmware for MONO NO AWARE's JK.
|
2019-03-01 18:01:45 -05:00 |
mcopy_mono_firmware_camera_bolex_capper
|
Mcopy firmware with optional capper feature
|
2022-07-17 11:05:20 -04:00 |
mcopy_mono_firmware_projectors
|
Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.
|
2019-04-04 18:49:07 -04:00 |
mcopy_mono_firmware_projectors_secondary
|
Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.
|
2019-04-04 18:49:07 -04:00 |
oxberry_firmware
|
Filmout release 1.5.0.
|
2020-01-20 01:37:38 -05:00 |