Matt McWilliams 0b59f4906f Implement the button and switch logic for physical interfaces to the camera. In the case that the open/close switch is changed, move to that state, otherwise allow for digital control.		2024-08-05 06:47:12 -04:00
..
components	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
intval2_connector_firmware	…
lib	Add getDirection() to EndstopCameraShield and fix sloppy bugs in code that were not disabling emitters after actions. Could have caused false positives in behavior so check on the machine	2024-08-03 08:46:46 -04:00
mcopy_ACME_Trebes_Nanolab	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_JKMM99	…
mcopy_JKMM99_intval	…
mcopy_JKMM100	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_JKMM100_second_projector	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_JKMM100_work	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_arri_s_DC_firmware	Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.	2022-10-28 11:28:30 -04:00
mcopy_arri_s_firmware	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_cam_canon_ble	Both components are working properly.	2023-07-04 22:46:37 -04:00
mcopy_cam_canon_ble_nano	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_cam_firmware	…
mcopy_cam_relay	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_firmware	…
mcopy_jk_firmware	…
mcopy_mitchell_camera	Implement the button and switch logic for physical interfaces to the camera. In the case that the open/close switch is changed, move to that state, otherwise allow for digital control.	2024-08-05 06:47:12 -04:00
mcopy_mono_firmware_camera	…
mcopy_mono_firmware_camera_bolex	…
mcopy_mono_firmware_camera_bolex_capper	Mcopy firmware with optional capper feature	2022-07-17 11:05:20 -04:00
mcopy_mono_firmware_projectors	Fix the dual projector script and add notes	2023-11-30 22:32:48 -05:00
mcopy_mono_firmware_projectors_secondary	on site work at MONO	2023-07-01 16:34:07 -04:00
mcopy_oxberry_camera	Add getDirection() to EndstopCameraShield and fix sloppy bugs in code that were not disabling emitters after actions. Could have caused false positives in behavior so check on the machine	2024-08-03 08:46:46 -04:00
mcopy_projector_firmware	There does not need to be separate open_forward/open_backward and closed_forward/closed_backward commands. Direction should be set with separate commands and can be controlled at a higher level.	2024-07-07 21:32:02 -04:00
mcopy_projector_servo_reset	Fix for case where this.confirmExec is not a function	2023-10-08 18:15:31 -04:00
oxberry_firmware	…