Commit Graph

1048 Commits

Author SHA1 Message Date
Matt McWilliams f958789b20 Merge remote-tracking branch 'origin/canon_ble' into canon_ble 2023-07-02 13:56:11 -04:00
Matt McWilliams 4beef04a3f Projector debug idea. 2023-07-02 13:56:03 -04:00
Matthew McWilliams 6d379d284b on site work at MONO 2023-07-01 16:34:07 -04:00
Matt McWilliams 2c21110b97 fix reference to cmdChar 2023-06-28 20:01:53 -04:00
Matt McWilliams 777db577d7 Structure of both sketches is complete, need to test on hardware 2023-06-28 15:06:11 -04:00
Matt McWilliams bf320216cf REmove remaining components from ble 2023-06-28 12:43:24 -04:00
Matt McWilliams b48c498574 Remove unneeded components from both ble sketches 2023-06-28 12:41:54 -04:00
Matt McWilliams 0b71da8e7b Canon BLE two-Arduino rewrite WIP 2023-06-27 23:16:16 -04:00
Matt McWilliams c0d6cbccec Can now detect if state is available on a device 2023-06-17 17:57:30 -04:00
Matt McWilliams 95ede98623 State string should start and end with the character 2023-06-17 13:08:00 -04:00
Matt McWilliams 3881dd4891 Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
Matt McWilliams 71e4bea384 Preliminary state support in arduino library. Currently confirms the negative state. Might want to push it until after verify, out of enumerate. 2023-06-16 23:04:16 -04:00
Matt McWilliams 83aa3099c4 Update the settings page with time for projector and camera actions 2023-06-16 22:07:53 -04:00
Matt McWilliams 672db32917 Put in place changes needed to receive a string from an arduino 2023-06-12 22:45:25 -04:00
Matt McWilliams 80a9c23f4d Speed down the motors 2023-05-26 07:09:00 -04:00
Matt McWilliams 49ad3c28a8 Only print projector time to state 2023-05-25 10:45:44 -04:00
Matt McWilliams a29c85628c Add bones of the dual stepper motor, JK compatible projector firmware. 2023-05-25 10:43:45 -04:00
Matt McWilliams 3ec93ab3b1 work 2023-05-16 23:05:13 -04:00
Matt McWilliams 10c29d3af1 Add a set screw to the gate_key 2023-05-15 21:48:09 -04:00
Matt McWilliams 41840b90c8 Update gitsub 2023-05-15 12:36:03 -04:00
Matt McWilliams c89e865d3d Bearing needs slight gap to allow the inner bearing wheel to rotate freely 2023-05-14 21:17:20 -04:00
Matt McWilliams c6ec54bd06 Flip projector panel to print 2023-05-14 21:01:46 -04:00
Matt McWilliams af3b1b8cbb Create first draft of projector panel redesign 2023-05-14 21:00:52 -04:00
Matt McWilliams 86273a9f09 Merge remote-tracking branch 'origin/canon_ble' into canon_ble 2023-05-02 23:58:39 -04:00
Matt McWilliams ba0241a811 Update ESP32 case 2023-05-02 23:58:31 -04:00
Matt McWilliams 1bd73876b4 Add sprocketed roller module 2023-04-28 15:35:54 -04:00
Matt McWilliams cc806cbe52 Initialize and connect only after mcopyserial connects. 2023-04-20 22:50:48 -04:00
Matt McWilliams 8f7a40075a Add connected and identified member booleans to determine when fully connected to mcopy. 2023-04-20 22:37:37 -04:00
Matt McWilliams 64faaa9427 Slight change to outer diameter. 2023-04-19 13:32:06 -04:00
Matt McWilliams d44c67ce80 Update the lens board design 2023-04-19 13:31:47 -04:00
Matt McWilliams 144b408092 Print state in the arri-s firmware 2023-04-17 16:44:04 -04:00
Matt McWilliams d2390dca30 Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs 2023-04-16 23:33:11 -04:00
Matt McWilliams 503a8ec92f Add magnets to bellows board design 2023-04-16 22:53:16 -04:00
Matt McWilliams ca22a3ba4b Rewrite arri_s_firmware to use McopySerial 2023-04-16 16:42:00 -04:00
Matt McWilliams ef54e61494 Use McopySerial in mcopy_arri_s_firmware 2023-04-15 22:44:33 -04:00
Matt McWilliams b1745c786b Invert logic for use with solid state relays rather than standard 2023-04-14 19:48:20 -04:00
Matt McWilliams 83efbc18c7 Fix mcopy_cam_canon_ble 2023-04-13 20:39:24 -04:00
Matthew McWilliams f47396e48c Need confirmation after mcopy_cam_relay 2023-04-12 15:25:41 -04:00
Matt McWilliams 03c27a9226 Relay logic was reversed 2023-04-12 15:15:41 -04:00
Matt McWilliams 08655898d4 Merge remote-tracking branch 'origin/canon_ble' into canon_ble 2023-04-12 14:52:40 -04:00
Matt McWilliams 5d347d23e4 Correctly reference backward LED 2023-04-12 14:52:35 -04:00
Matthew McWilliams a25d93ec55 Correctly delay between frames. 2023-04-12 14:52:05 -04:00
Matthew McWilliams bbf0cbd1c6 Add the button to the relay sketch 2023-04-11 23:43:35 -04:00
Matthew McWilliams 4aceeac1c2 Remove libraries required by TickTwo. This sketch will not use blink in this fashion ATM. 2023-04-11 23:26:12 -04:00
Matt McWilliams 1f5bb85304 Correctly reference LEDs 2023-04-11 22:39:44 -04:00
Matthew McWilliams 087fd3f763 Complete the mcopy relay sketch without variable exposure. 2023-04-11 01:13:44 -04:00
Matthew McWilliams daece3b45a Add the new mcopy_cam_relay script. 2023-04-11 00:38:06 -04:00
Matthew McWilliams 9705505285 Refactor ino.sh to loop through array of scripts to copy McopySerial library to. 2023-04-11 00:37:14 -04:00
Matthew McWilliams 9016062f70 Rename mcopy_cam_canon to mcopy_cam_canon_ble to differentiate 2023-04-11 00:28:27 -04:00
Matthew McWilliams a6de66eb66 Blink LED on startup 2023-04-11 00:24:39 -04:00