Commit Graph

1037 Commits

Author SHA1 Message Date
Matt McWilliams 71e4bea384 Preliminary state support in arduino library. Currently confirms the negative state. Might want to push it until after verify, out of enumerate. 2023-06-16 23:04:16 -04:00
Matt McWilliams 83aa3099c4 Update the settings page with time for projector and camera actions 2023-06-16 22:07:53 -04:00
Matt McWilliams 672db32917 Put in place changes needed to receive a string from an arduino 2023-06-12 22:45:25 -04:00
Matt McWilliams 80a9c23f4d Speed down the motors 2023-05-26 07:09:00 -04:00
Matt McWilliams 49ad3c28a8 Only print projector time to state 2023-05-25 10:45:44 -04:00
Matt McWilliams a29c85628c Add bones of the dual stepper motor, JK compatible projector firmware. 2023-05-25 10:43:45 -04:00
Matt McWilliams 3ec93ab3b1 work 2023-05-16 23:05:13 -04:00
Matt McWilliams 10c29d3af1 Add a set screw to the gate_key 2023-05-15 21:48:09 -04:00
Matt McWilliams 41840b90c8 Update gitsub 2023-05-15 12:36:03 -04:00
Matt McWilliams c89e865d3d Bearing needs slight gap to allow the inner bearing wheel to rotate freely 2023-05-14 21:17:20 -04:00
Matt McWilliams c6ec54bd06 Flip projector panel to print 2023-05-14 21:01:46 -04:00
Matt McWilliams af3b1b8cbb Create first draft of projector panel redesign 2023-05-14 21:00:52 -04:00
Matt McWilliams 86273a9f09 Merge remote-tracking branch 'origin/canon_ble' into canon_ble 2023-05-02 23:58:39 -04:00
Matt McWilliams ba0241a811 Update ESP32 case 2023-05-02 23:58:31 -04:00
Matt McWilliams 1bd73876b4 Add sprocketed roller module 2023-04-28 15:35:54 -04:00
Matt McWilliams cc806cbe52 Initialize and connect only after mcopyserial connects. 2023-04-20 22:50:48 -04:00
Matt McWilliams 8f7a40075a Add connected and identified member booleans to determine when fully connected to mcopy. 2023-04-20 22:37:37 -04:00
Matt McWilliams 64faaa9427 Slight change to outer diameter. 2023-04-19 13:32:06 -04:00
Matt McWilliams d44c67ce80 Update the lens board design 2023-04-19 13:31:47 -04:00
Matt McWilliams 144b408092 Print state in the arri-s firmware 2023-04-17 16:44:04 -04:00
Matt McWilliams d2390dca30 Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs 2023-04-16 23:33:11 -04:00
Matt McWilliams 503a8ec92f Add magnets to bellows board design 2023-04-16 22:53:16 -04:00
Matt McWilliams ca22a3ba4b Rewrite arri_s_firmware to use McopySerial 2023-04-16 16:42:00 -04:00
Matt McWilliams ef54e61494 Use McopySerial in mcopy_arri_s_firmware 2023-04-15 22:44:33 -04:00
Matt McWilliams b1745c786b Invert logic for use with solid state relays rather than standard 2023-04-14 19:48:20 -04:00
Matt McWilliams 83efbc18c7 Fix mcopy_cam_canon_ble 2023-04-13 20:39:24 -04:00
Matthew McWilliams f47396e48c Need confirmation after mcopy_cam_relay 2023-04-12 15:25:41 -04:00
Matt McWilliams 03c27a9226 Relay logic was reversed 2023-04-12 15:15:41 -04:00
Matt McWilliams 08655898d4 Merge remote-tracking branch 'origin/canon_ble' into canon_ble 2023-04-12 14:52:40 -04:00
Matt McWilliams 5d347d23e4 Correctly reference backward LED 2023-04-12 14:52:35 -04:00
Matthew McWilliams a25d93ec55 Correctly delay between frames. 2023-04-12 14:52:05 -04:00
Matthew McWilliams bbf0cbd1c6 Add the button to the relay sketch 2023-04-11 23:43:35 -04:00
Matthew McWilliams 4aceeac1c2 Remove libraries required by TickTwo. This sketch will not use blink in this fashion ATM. 2023-04-11 23:26:12 -04:00
Matt McWilliams 1f5bb85304 Correctly reference LEDs 2023-04-11 22:39:44 -04:00
Matthew McWilliams 087fd3f763 Complete the mcopy relay sketch without variable exposure. 2023-04-11 01:13:44 -04:00
Matthew McWilliams daece3b45a Add the new mcopy_cam_relay script. 2023-04-11 00:38:06 -04:00
Matthew McWilliams 9705505285 Refactor ino.sh to loop through array of scripts to copy McopySerial library to. 2023-04-11 00:37:14 -04:00
Matthew McWilliams 9016062f70 Rename mcopy_cam_canon to mcopy_cam_canon_ble to differentiate 2023-04-11 00:28:27 -04:00
Matthew McWilliams a6de66eb66 Blink LED on startup 2023-04-11 00:24:39 -04:00
Matt McWilliams 6ada6b08ed Add LED features to projector firmware. 2023-04-10 23:28:02 -04:00
Matt McWilliams 710e178ba2 Merge branch 'canon_ble' of ssh://git.sixteenmillimeter.com/16mm/mcopy into canon_ble 2023-04-10 21:12:08 -04:00
Matt McWilliams 9e7990851e Case design work 2023-04-10 21:04:01 -04:00
Matt McWilliams ae34558f18 Add project home and mirrors to Readme 2023-04-07 09:44:51 -04:00
Matt McWilliams c1a51f1ce8 Canon EF bellows adapter 2023-04-01 19:24:29 -04:00
Matt McWilliams 13702a3d5b Add a canon_EF_body_cap script 2023-03-30 20:15:43 -04:00
Matt McWilliams 6b66cfe03f Add bolt voids to canon mount 2023-03-29 22:47:49 -04:00
Matt McWilliams cbc876c57c Case ready for production 2023-03-29 21:58:03 -04:00
Matt McWilliams 7813a8c904 First draft of Rebel case 2023-03-28 19:41:35 -04:00
Matt McWilliams 5f941e91b5 Add conecpt for arduino nano case 2023-03-26 20:19:15 -04:00
Matt McWilliams d262ed418d Add base to socket connector. 2023-03-26 20:19:00 -04:00