Commit Graph

748 Commits

Author SHA1 Message Date
dependabot[bot] 53941835cb
Bump bl from 3.0.0 to 3.0.1 in /cli
Bumps [bl](https://github.com/rvagg/bl) from 3.0.0 to 3.0.1.
- [Release notes](https://github.com/rvagg/bl/releases)
- [Commits](https://github.com/rvagg/bl/compare/v3.0.0...v3.0.1)

Signed-off-by: dependabot[bot] <support@github.com>
2020-09-29 19:50:45 +00:00
sixteenmillimeter 6f19842da0
Merge pull request #49 from sixteenmillimeter/dependabot/npm_and_yarn/lodash-4.17.19
Bump lodash from 4.17.15 to 4.17.19
2020-09-29 15:49:53 -04:00
sixteenmillimeter 3692195887
Merge pull request #48 from sixteenmillimeter/dependabot/npm_and_yarn/cli/lodash-4.17.19
Bump lodash from 4.17.15 to 4.17.19 in /cli
2020-09-29 15:49:36 -04:00
sixteenmillimeter e672c2dc93
Merge pull request #47 from sixteenmillimeter/dependabot/npm_and_yarn/app/lodash-4.17.19
Bump lodash from 4.17.15 to 4.17.19 in /app
2020-09-29 15:49:24 -04:00
sixteenmillimeter 65292524b1 Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%) 2020-09-29 15:13:22 -04:00
sixteenmillimeter 5e481e77b0 Addressing the issue with the JKMM99 projector functionality where frames stop prematurely. Conceivably, the proj_microswitch() function is the only place that calls proj_stop() so the issue is with the logic there. It makes little sense that this function allows for 15ms frames because of the test that requires a 450ms elapsed time before it is stopped. 2020-09-29 14:00:54 -04:00
sixteenmillimeter 7c9543239e Rest of last commit. Renderer js 2020-09-29 13:57:59 -04:00
sixteenmillimeter 8672b6584a Work towards issue #52. Adds a statement within the arduino.end() method that watches for an 'E' char byte and will alert the UI while pausing a running sequence. Needs to be in place for firmware to be able to throw errors to UI. 2020-09-29 13:48:06 -04:00
sixteenmillimeter c5d7f9c91f Re-write of the JKMM99 which replaces the relay-based camera controller with an intval-based one. This relies on the Arduino Uno in the control box to handle all of the control logic in place of an on-board Arduino Trinket Pro. 2020-09-28 23:49:57 -04:00
sixteenmillimeter 9502d255c7 Fixed typo in Pins() where PROJECTOR_FWD was set to LOW twice instead of PROJECTOR_BWD. 2020-09-28 23:47:36 -04:00
sixteenmillimeter 08c3c23da0 Firmware for new JKMM99. Deployed for testing. 2020-08-18 14:21:27 -04:00
sixteenmillimeter 6eeeae85c8 Updated patch number, now working on 1.6.5 2020-08-18 14:21:07 -04:00
sixteenmillimeter 7c61af7043 Added logging to the arduino module to list all connected devices. 2020-08-18 14:20:43 -04:00
sixteenmillimeter d501623290 Updated projector knob for printing 2020-08-18 14:20:15 -04:00
sixteenmillimeter 0ccb29dfb0 Shape for the friction knob on the JK 106 projection system. 2020-08-10 23:52:54 -04:00
sixteenmillimeter f02782d4da Increment build to 1.6.4. Re-package and deploy for mac 2020-08-09 23:39:52 -04:00
sixteenmillimeter c2e83ab27b Added a diagram for wiring the Slo-Syn motor 2020-08-09 23:26:21 -04:00
sixteenmillimeter 32356b0037 Log doesn't need to print its own path. 2020-08-09 23:25:55 -04:00
sixteenmillimeter dd1bec8394 Firmware for controlling the JK 106 projector with a 103/104-style camera 2020-08-09 20:04:26 -04:00
sixteenmillimeter 4f2252d113 Merge remote-tracking branch 'origin/master' 2020-08-09 20:03:52 -04:00
sixteenmillimeter 0145bebb4b Turn off notifier if errors out 2020-08-09 20:03:48 -04:00
mmcwilliams 5e6fbbb43c Add armv7l architecture to dpkg for Raspian. 2020-07-30 11:28:11 -04:00
mmcwilliams 7e516a59b6 Wrong arch again 2020-07-30 11:04:02 -04:00
mmcwilliams 948b20fead Install dependencies for rpi. Package as armv71 for raspberry pi 2020-07-30 11:01:57 -04:00
mmcwilliams c61c128044 Merge remote-tracking branch 'origin/master' 2020-07-30 10:54:44 -04:00
mmcwilliams 296ef93ecb Installer for rpi 2020-07-30 10:54:35 -04:00
sixteenmillimeter 74621ef1fb Squashing notifier/notify-send errors on raspian. If the system doesnt work with node-notifier just skip 2020-07-27 11:43:55 -04:00
sixteenmillimeter 0811222d27 Normalize paths being used in filmout feature. Purpose of this is to rely on fs module to correctly handle paths for windows because it was previously broken. Will run tests. 2020-07-26 22:26:34 -04:00
sixteenmillimeter 0c364576c9 Squash errors in case of mkdir trying to create an existing directory (need mkdirp, but this works without an extra module) 2020-07-26 22:01:28 -04:00
dependabot[bot] 7ff49f0aa6
Bump lodash from 4.17.15 to 4.17.19 in /app
Bumps [lodash](https://github.com/lodash/lodash) from 4.17.15 to 4.17.19.
- [Release notes](https://github.com/lodash/lodash/releases)
- [Commits](https://github.com/lodash/lodash/compare/4.17.15...4.17.19)

Signed-off-by: dependabot[bot] <support@github.com>
2020-07-27 01:56:48 +00:00
dependabot[bot] a9b678f748
Bump lodash from 4.17.15 to 4.17.19 in /cli
Bumps [lodash](https://github.com/lodash/lodash) from 4.17.15 to 4.17.19.
- [Release notes](https://github.com/lodash/lodash/releases)
- [Commits](https://github.com/lodash/lodash/compare/4.17.15...4.17.19)

Signed-off-by: dependabot[bot] <support@github.com>
2020-07-27 01:56:36 +00:00
dependabot[bot] f2fd77a858
Bump lodash from 4.17.15 to 4.17.19
Bumps [lodash](https://github.com/lodash/lodash) from 4.17.15 to 4.17.19.
- [Release notes](https://github.com/lodash/lodash/releases)
- [Commits](https://github.com/lodash/lodash/compare/4.17.15...4.17.19)

Signed-off-by: dependabot[bot] <support@github.com>
2020-07-27 01:56:33 +00:00
sixteenmillimeter 8c97258866 Update all modules in core project and desktop app. Needed to update syntax of import in sequencer module because uuid is updated to 8.2.0 2020-07-26 21:55:36 -04:00
sixteenmillimeter 5c691a8e12 Fixed serialization error that was breaking raspberry pi 4 installation. It is apparently a real bug that should be breaking the app. 2020-07-26 21:52:53 -04:00
sixteenmillimeter e5e4c7ded7
Update Readme.md
Add reference to new Windows build of 1.6.1
2020-07-07 12:18:25 -04:00
sixteenmillimeter a748f689bd
Merge pull request #45 from sixteenmillimeter/dependabot/npm_and_yarn/app/electron-7.2.4
Bump electron from 7.1.8 to 7.2.4 in /app
2020-07-07 12:16:04 -04:00
sixteenmillimeter 5309f85638
Merge pull request #46 from sixteenmillimeter/dependabot/npm_and_yarn/electron-9.1.0
Bump electron from 4.1.1 to 9.1.0
2020-07-07 12:15:51 -04:00
sixteenmillimeter efc6d0ef03 Moving further down up the path. See previous commit. 2020-07-07 12:07:00 -04:00
sixteenmillimeter a379e4b086 Windows path differences from linux/darwin are ruining my day https://github.com/felixrieseberg/electron-wix-msi/issues/5 2020-07-07 12:05:28 -04:00
sixteenmillimeter 4a1bf417a4 Running build scripts on windows for the first time in a while. 2020-07-07 11:59:34 -04:00
mmcwilliams b702929e1f cases work 2020-07-07 11:54:20 -04:00
sixteenmillimeter d042381293 Projector work 2020-07-07 11:54:01 -04:00
dependabot[bot] 9805127387
Bump electron from 4.1.1 to 9.1.0
Bumps [electron](https://github.com/electron/electron) from 4.1.1 to 9.1.0.
- [Release notes](https://github.com/electron/electron/releases)
- [Changelog](https://github.com/electron/electron/blob/master/docs/breaking-changes.md)
- [Commits](https://github.com/electron/electron/compare/v4.1.1...v9.1.0)

Signed-off-by: dependabot[bot] <support@github.com>
2020-07-07 09:36:23 +00:00
dependabot[bot] 270862bd5f
Bump electron from 7.1.8 to 7.2.4 in /app
Bumps [electron](https://github.com/electron/electron) from 7.1.8 to 7.2.4.
- [Release notes](https://github.com/electron/electron/releases)
- [Changelog](https://github.com/electron/electron/blob/master/docs/breaking-changes.md)
- [Commits](https://github.com/electron/electron/compare/v7.1.8...v7.2.4)

Signed-off-by: dependabot[bot] <support@github.com>
2020-07-07 00:20:09 +00:00
sixteenmillimeter 53e012018f JK projector WIP 2020-07-01 18:04:17 -04:00
sixteenmillimeter 420a3fbd50 Sequencer case 2020-07-01 18:04:10 -04:00
sixteenmillimeter 5258fcbf30 Rails work 2020-07-01 18:04:03 -04:00
sixteenmillimeter 4db3ce8b88 jk camera controller case 2020-07-01 18:03:40 -04:00
sixteenmillimeter e3d36a1f27 Merge remote-tracking branch 'origin/master' 2020-07-01 18:03:26 -04:00
sixteenmillimeter 67d0e750c2 Mcopy camera firmware 2020-07-01 18:03:20 -04:00