Matt McWilliams
|
46be1bfd3b
|
Assembly work. Adjusted design to simplify placement of 2 linear bearings
|
2023-01-04 23:11:48 -05:00 |
Matt McWilliams
|
1029885047
|
Update threaded Z, still needs m3 bolts
|
2023-01-04 18:26:22 -05:00 |
Matt McWilliams
|
164bde8cce
|
All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch.
|
2023-01-03 21:16:19 -05:00 |
Matt McWilliams
|
41504caac9
|
Increase the bolt size on the bellows board
|
2023-01-02 17:11:44 -05:00 |
Matt McWilliams
|
9b34b4e026
|
Adjust the height of the mount (-14.5mm) and make bolt voids larger
|
2023-01-02 14:33:16 -05:00 |
Matt McWilliams
|
95612c1d18
|
Add m3 nuts
|
2023-01-02 14:30:54 -05:00 |
Matt McWilliams
|
0829ec9081
|
Use a variable
|
2023-01-02 13:53:41 -05:00 |
Matt McWilliams
|
ef0d246901
|
Increase the inner diameter of the bellows board to allow the threads to pass through cleanly and be held in place by the screw
|
2023-01-02 13:53:30 -05:00 |
Matt McWilliams
|
925659ba4b
|
Create an Arri S mount for the JK rails
|
2023-01-01 11:43:21 -05:00 |
Matt McWilliams
|
20c9287ac2
|
Work on concept JK lens assembly
|
2022-12-24 17:36:25 -05:00 |
Matt McWilliams
|
8aaa2b8940
|
Add a concept JK lens assembly
|
2022-12-24 01:55:11 -05:00 |
Matt McWilliams
|
30bd35e21d
|
Add an M4 nut to the common OpenSCAD lib
|
2022-12-24 01:54:57 -05:00 |
Matthew McWilliams
|
0c2e39f0b2
|
Arri bellows work
|
2022-12-23 23:01:37 -05:00 |
Matt McWilliams
|
ee1e9c9feb
|
Stepper firmware is working. Needed extra tape around coupling connector to add friction to connection and now it keeps.
|
2022-11-04 19:37:11 -04:00 |
Matt McWilliams
|
fcb77232ec
|
Create the driveCoupling module for the stepper motor design
|
2022-10-30 12:14:25 -04:00 |
Matt McWilliams
|
1fcbec7466
|
Work on stepper motor design and software. Motor still moves more slowly than it should but will investigate multiple factors leading to this result
|
2022-10-28 19:46:02 -04:00 |
Matt McWilliams
|
bb5b7c7897
|
Add divot to the drive coupling
|
2022-10-28 07:44:19 -04:00 |
Matt McWilliams
|
42b3aa767d
|
Allow for even more space for microswritch
|
2022-10-28 01:32:58 -04:00 |
Matt McWilliams
|
b20a6084e6
|
Allow for more space for the microswitch
|
2022-10-27 18:10:13 -04:00 |
Matthew McWilliams
|
d9a8576701
|
Adjust size of drive coupling for the DC connector
|
2022-10-21 16:05:56 -04:00 |
Matthew McWilliams
|
69273d2a1c
|
Increase scale of motor shaft void by 5%
|
2022-10-21 15:26:17 -04:00 |
Matthew McWilliams
|
755ea757f7
|
Add set screw for bearing and counter sink bolt caps for other cap m3s
|
2022-10-21 15:24:21 -04:00 |
Matt McWilliams
|
81fc54af8d
|
DC motor design has all components designed, need to print, test and adjust.
|
2022-10-19 06:38:56 -04:00 |
Matt McWilliams
|
4281ca4390
|
Work on Arri-S DC motor
|
2022-10-16 19:03:02 -04:00 |
Matt McWilliams
|
3419172535
|
Arri-S work
|
2022-10-15 00:13:05 -04:00 |
Matt McWilliams
|
206c266b08
|
Added Arri-S motor and cap measurements as taken 10/8/2022
|
2022-10-09 11:22:12 -04:00 |
Matthew McWilliams
|
5026cf869f
|
Arri-S work
|
2022-10-07 19:47:56 -04:00 |
Matt McWilliams
|
1964d6002d
|
Add mono logo as png, but might use svg instead. Render crashed PC.
|
2022-07-22 21:56:43 -04:00 |
Matt McWilliams
|
ea055d6e56
|
Capper case candidate
|
2022-07-13 23:04:00 -04:00 |
Matthew McWilliams
|
bc48765b35
|
Start work on base
|
2022-07-13 18:16:43 -04:00 |
Matthew McWilliams
|
70c2c695f0
|
All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity.
|
2022-07-13 15:21:26 -04:00 |
Matthew McWilliams
|
c33c6e24f6
|
Work on motor rod
|
2022-07-13 09:01:25 -04:00 |
Matt McWilliams
|
2924efe39f
|
Reduce the size of the void for the screw in the cap.
|
2022-06-28 08:34:29 -04:00 |
Matt McWilliams
|
e275539fb0
|
Remove endstop completely and start rounding surfaces.
|
2022-06-22 07:45:01 -04:00 |
Matt McWilliams
|
4c13c54815
|
Updates to endstop mount design. Had incorrectly positioned voids for SMD chips on the endstop
|
2022-06-20 13:00:40 -04:00 |
Matt McWilliams
|
62a66f5f6d
|
More mount work and start of endstop logic. Rebuilding the B&H projector unity.
|
2022-06-17 23:39:19 -04:00 |
Matt McWilliams
|
3a435933e3
|
Work on the opto endstop mount. This needs to be re-oriented before next print.
|
2022-06-16 00:29:31 -04:00 |
Matt McWilliams
|
78f7ac0e68
|
Mount work
|
2022-06-13 22:46:23 -04:00 |
Matt McWilliams
|
04a0330327
|
All work on first draft of capper hardware
|
2022-06-12 22:26:03 -04:00 |
Matt McWilliams
|
2f9201716a
|
All capper work. Debug firmware for testing. STL of cap as printed.
|
2022-06-12 13:14:43 -04:00 |
Matt McWilliams
|
818c8453ee
|
Capper OpenSCAD work
|
2022-06-11 16:03:08 -04:00 |
Matt McWilliams
|
9d3bf24627
|
Hardware ideas for capper mount and flag. Need to model servo and add places for endstops
|
2022-06-07 07:55:47 -04:00 |
Matt McWilliams
|
b3bb07454f
|
Add a lamp housing knob
|
2021-04-05 10:40:50 -04:00 |
Matt McWilliams
|
6fee5a803c
|
connector case box
|
2021-03-19 21:32:53 -04:00 |
Matt McWilliams
|
2c8eabeffd
|
3D printable panel for the Oxberry control box.
|
2021-02-22 13:24:18 -05:00 |
sixteenmillimeter
|
d501623290
|
Updated projector knob for printing
|
2020-08-18 14:20:15 -04:00 |
sixteenmillimeter
|
0ccb29dfb0
|
Shape for the friction knob on the JK 106 projection system.
|
2020-08-10 23:52:54 -04:00 |
mmcwilliams
|
b702929e1f
|
cases work
|
2020-07-07 11:54:20 -04:00 |
sixteenmillimeter
|
d042381293
|
Projector work
|
2020-07-07 11:54:01 -04:00 |
sixteenmillimeter
|
53e012018f
|
JK projector WIP
|
2020-07-01 18:04:17 -04:00 |