| .. |
|
components
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
intval2_connector_firmware
|
intval2 connector firmware
|
2021-03-19 14:09:46 -04:00 |
|
lib
|
Work on oxberry camera firmware. Basics are there. Will add button features to mitchell.
|
2024-07-05 23:56:45 -04:00 |
|
mcopy_ACME_Trebes_Nanolab
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_JKMM99
|
Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)
|
2020-09-29 15:13:22 -04:00 |
|
mcopy_JKMM99_intval
|
Fixed projector function
|
2020-10-03 21:32:16 -04:00 |
|
mcopy_JKMM100
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_JKMM100_second_projector
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_JKMM100_work
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_arri_s_DC_firmware
|
Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.
|
2022-10-28 11:28:30 -04:00 |
|
mcopy_arri_s_firmware
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_cam_canon_ble
|
Both components are working properly.
|
2023-07-04 22:46:37 -04:00 |
|
mcopy_cam_canon_ble_nano
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_cam_firmware
|
Mcopy camera firmware
|
2020-07-01 18:03:20 -04:00 |
|
mcopy_cam_relay
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_firmware
|
Solid state relay version of the mcopy jk firmware
|
2018-01-22 22:05:10 -05:00 |
|
mcopy_jk_firmware
|
Momentary switch delay was too long.
|
2018-07-03 14:25:36 -04:00 |
|
mcopy_mitchell_camera
|
Work on oxberry camera firmware. Basics are there. Will add button features to mitchell.
|
2024-07-05 23:56:45 -04:00 |
|
mcopy_mono_firmware_camera
|
Add commands for controlling a secondary projector.
|
2019-03-01 20:14:20 -05:00 |
|
mcopy_mono_firmware_camera_bolex
|
Add an alternate camera firmware for MONO NO AWARE's JK.
|
2019-03-01 18:01:45 -05:00 |
|
mcopy_mono_firmware_camera_bolex_capper
|
Mcopy firmware with optional capper feature
|
2022-07-17 11:05:20 -04:00 |
|
mcopy_mono_firmware_projectors
|
Fix the dual projector script and add notes
|
2023-11-30 22:32:48 -05:00 |
|
mcopy_mono_firmware_projectors_secondary
|
on site work at MONO
|
2023-07-01 16:34:07 -04:00 |
|
mcopy_oxberry_camera
|
Work on oxberry camera firmware. Basics are there. Will add button features to mitchell.
|
2024-07-05 23:56:45 -04:00 |
|
mcopy_projector_firmware
|
Accidentally modified an autogenerated part of McopySerial. Fixed
|
2024-06-30 12:10:30 -04:00 |
|
mcopy_projector_servo_reset
|
Fix for case where this.confirmExec is not a function
|
2023-10-08 18:15:31 -04:00 |
|
oxberry_firmware
|
Filmout release 1.5.0.
|
2020-01-20 01:37:38 -05:00 |
Matt McWilliams
c0e7422920