Matt McWilliams 461add1cda Start adding LEDs		2023-03-26 16:06:08 -04:00
..
components	Update McopySerial usage in both scripts that use it.	2023-03-21 20:38:45 -04:00
intval2_connector_firmware	intval2 connector firmware	2021-03-19 14:09:46 -04:00
lib/McopySerial	Fixed issue with baud being stored as const overflowed. Silly mistake.	2023-03-21 20:35:00 -04:00
mcopy_JKMM99	Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)	2020-09-29 15:13:22 -04:00
mcopy_JKMM99_intval	Fixed projector function	2020-10-03 21:32:16 -04:00
mcopy_JKMM100	Fixed issue with baud being stored as const overflowed. Silly mistake.	2023-03-21 20:35:00 -04:00
mcopy_arri_s_DC_firmware	Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.	2022-10-28 11:28:30 -04:00
mcopy_arri_s_firmware	Use variable in stepper declaration	2022-11-11 15:47:58 -05:00
mcopy_cam_canon	Start adding LEDs	2023-03-26 16:06:08 -04:00
mcopy_cam_firmware	Mcopy camera firmware	2020-07-01 18:03:20 -04:00
mcopy_firmware	Solid state relay version of the mcopy jk firmware	2018-01-22 22:05:10 -05:00
mcopy_jk_firmware	Momentary switch delay was too long.	2018-07-03 14:25:36 -04:00
mcopy_mono_firmware_camera	Add commands for controlling a secondary projector.	2019-03-01 20:14:20 -05:00
mcopy_mono_firmware_camera_bolex	Add an alternate camera firmware for MONO NO AWARE's JK.	2019-03-01 18:01:45 -05:00
mcopy_mono_firmware_camera_bolex_capper	Mcopy firmware with optional capper feature	2022-07-17 11:05:20 -04:00
mcopy_mono_firmware_projectors	Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.	2019-04-04 18:49:07 -04:00
mcopy_mono_firmware_projectors_secondary	Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.	2019-04-04 18:49:07 -04:00
oxberry_firmware	Filmout release 1.5.0.	2020-01-20 01:37:38 -05:00