Matt McWilliams b14d24e650 Prototype for Arduino Mega shield for projector.		2023-11-25 18:08:10 -05:00
..
components	Add "home" as command character "I".	2023-10-10 21:16:49 -04:00
intval2_connector_firmware	intval2 connector firmware	2021-03-19 14:09:46 -04:00
lib/McopySerial	Add "home" as command character "I".	2023-10-10 21:16:49 -04:00
mcopy_JKMM99	Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)	2020-09-29 15:13:22 -04:00
mcopy_JKMM99_intval	Fixed projector function	2020-10-03 21:32:16 -04:00
mcopy_JKMM100	Add "home" as command character "I".	2023-10-10 21:16:49 -04:00
mcopy_JKMM100_work	WIP	2023-07-23 20:00:42 -04:00
mcopy_arri_s_DC_firmware	Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.	2022-10-28 11:28:30 -04:00
mcopy_arri_s_firmware	Add "home" as command character "I".	2023-10-10 21:16:49 -04:00
mcopy_cam_canon_ble	Both components are working properly.	2023-07-04 22:46:37 -04:00
mcopy_cam_canon_ble_nano	Add "home" as command character "I".	2023-10-10 21:16:49 -04:00
mcopy_cam_firmware	…
mcopy_cam_relay	Add "home" as command character "I".	2023-10-10 21:16:49 -04:00
mcopy_firmware	…
mcopy_jk_firmware	…
mcopy_mono_firmware_camera	…
mcopy_mono_firmware_camera_bolex	…
mcopy_mono_firmware_camera_bolex_capper	Mcopy firmware with optional capper feature	2022-07-17 11:05:20 -04:00
mcopy_mono_firmware_projectors	Use the correct identifier on projectors	2023-07-03 20:33:18 -04:00
mcopy_mono_firmware_projectors_secondary	on site work at MONO	2023-07-01 16:34:07 -04:00
mcopy_projector_firmware	Prototype for Arduino Mega shield for projector.	2023-11-25 18:08:10 -05:00
mcopy_projector_servo_reset	Fix for case where this.confirmExec is not a function	2023-10-08 18:15:31 -04:00
oxberry_firmware	…