mcopy/ino
Matt McWilliams 9a89dbe6a5 Automatically toggle debug state internally 2023-03-09 21:08:36 -05:00
..
components Update light sketch, add Pixie lib 2023-03-05 17:13:29 -05:00
intval2_connector_firmware intval2 connector firmware 2021-03-19 14:09:46 -04:00
lib/McopySerial Automatically toggle debug state internally 2023-03-09 21:08:36 -05:00
mcopy_JKMM99 Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%) 2020-09-29 15:13:22 -04:00
mcopy_JKMM99_intval Fixed projector function 2020-10-03 21:32:16 -04:00
mcopy_arri_s_DC_firmware Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach. 2022-10-28 11:28:30 -04:00
mcopy_arri_s_firmware Use variable in stepper declaration 2022-11-11 15:47:58 -05:00
mcopy_cam_canon Automatically toggle debug state internally 2023-03-09 21:08:36 -05:00
mcopy_cam_firmware Mcopy camera firmware 2020-07-01 18:03:20 -04:00
mcopy_firmware Solid state relay version of the mcopy jk firmware 2018-01-22 22:05:10 -05:00
mcopy_jk_firmware Momentary switch delay was too long. 2018-07-03 14:25:36 -04:00
mcopy_mono_firmware_camera Add commands for controlling a secondary projector. 2019-03-01 20:14:20 -05:00
mcopy_mono_firmware_camera_bolex Add an alternate camera firmware for MONO NO AWARE's JK. 2019-03-01 18:01:45 -05:00
mcopy_mono_firmware_camera_bolex_capper Mcopy firmware with optional capper feature 2022-07-17 11:05:20 -04:00
mcopy_mono_firmware_projectors Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux. 2019-04-04 18:49:07 -04:00
mcopy_mono_firmware_projectors_secondary Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux. 2019-04-04 18:49:07 -04:00
oxberry_firmware Filmout release 1.5.0. 2020-01-20 01:37:38 -05:00