| .. |
|
components
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
intval2_connector_firmware
|
intval2 connector firmware
|
2021-03-19 14:09:46 -04:00 |
|
lib/McopySerial
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
mcopy_ACME_Trebes_Nanolab
|
Add a second projector version of the JKM100 script. In the script, move the 16ms delay to BEFORE the confirmation character and increase it to 100ms to make sure all shake is out of the system before shooting a frame.
|
2024-05-19 09:38:48 -04:00 |
|
mcopy_JKMM99
|
Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)
|
2020-09-29 15:13:22 -04:00 |
|
mcopy_JKMM99_intval
|
Fixed projector function
|
2020-10-03 21:32:16 -04:00 |
|
mcopy_JKMM100
|
Add a second projector version of the JKM100 script. In the script, move the 16ms delay to BEFORE the confirmation character and increase it to 100ms to make sure all shake is out of the system before shooting a frame.
|
2024-05-19 09:38:48 -04:00 |
|
mcopy_JKMM100_second_projector
|
Add a second projector version of the JKM100 script. In the script, move the 16ms delay to BEFORE the confirmation character and increase it to 100ms to make sure all shake is out of the system before shooting a frame.
|
2024-05-19 09:38:48 -04:00 |
|
mcopy_JKMM100_work
|
Merged changes from work script into JKMM100, works on device in both work script and deployment one
|
2024-04-06 15:48:02 -04:00 |
|
mcopy_arri_s_DC_firmware
|
Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.
|
2022-10-28 11:28:30 -04:00 |
|
mcopy_arri_s_firmware
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
mcopy_cam_canon_ble
|
Both components are working properly.
|
2023-07-04 22:46:37 -04:00 |
|
mcopy_cam_canon_ble_nano
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
mcopy_cam_firmware
|
Mcopy camera firmware
|
2020-07-01 18:03:20 -04:00 |
|
mcopy_cam_relay
|
Add the designs and sketches for the ACME Trebes.
|
2024-04-19 18:09:44 -06:00 |
|
mcopy_firmware
|
Solid state relay version of the mcopy jk firmware
|
2018-01-22 22:05:10 -05:00 |
|
mcopy_jk_firmware
|
Momentary switch delay was too long.
|
2018-07-03 14:25:36 -04:00 |
|
mcopy_mono_firmware_camera
|
Add commands for controlling a secondary projector.
|
2019-03-01 20:14:20 -05:00 |
|
mcopy_mono_firmware_camera_bolex
|
Add an alternate camera firmware for MONO NO AWARE's JK.
|
2019-03-01 18:01:45 -05:00 |
|
mcopy_mono_firmware_camera_bolex_capper
|
Mcopy firmware with optional capper feature
|
2022-07-17 11:05:20 -04:00 |
|
mcopy_mono_firmware_projectors
|
Fix the dual projector script and add notes
|
2023-11-30 22:32:48 -05:00 |
|
mcopy_mono_firmware_projectors_secondary
|
on site work at MONO
|
2023-07-01 16:34:07 -04:00 |
|
mcopy_projector_firmware
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
mcopy_projector_servo_reset
|
Fix for case where this.confirmExec is not a function
|
2023-10-08 18:15:31 -04:00 |
|
oxberry_firmware
|
Filmout release 1.5.0.
|
2020-01-20 01:37:38 -05:00 |
Matt McWilliams
9b7d1a3e5c