mcopy/ino
Matt McWilliams 58ce079330 Both components are working properly. 2023-07-04 22:46:37 -04:00
..
components Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
intval2_connector_firmware intval2 connector firmware 2021-03-19 14:09:46 -04:00
lib/McopySerial Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
mcopy_JKMM99 Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%) 2020-09-29 15:13:22 -04:00
mcopy_JKMM99_intval Fixed projector function 2020-10-03 21:32:16 -04:00
mcopy_JKMM100 Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
mcopy_arri_s_DC_firmware Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach. 2022-10-28 11:28:30 -04:00
mcopy_arri_s_firmware Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
mcopy_cam_canon_ble Both components are working properly. 2023-07-04 22:46:37 -04:00
mcopy_cam_canon_ble_nano Both components are working properly. 2023-07-04 22:46:37 -04:00
mcopy_cam_firmware Mcopy camera firmware 2020-07-01 18:03:20 -04:00
mcopy_cam_relay State string should start and end with the character 2023-06-17 13:08:00 -04:00
mcopy_firmware Solid state relay version of the mcopy jk firmware 2018-01-22 22:05:10 -05:00
mcopy_jk_firmware Momentary switch delay was too long. 2018-07-03 14:25:36 -04:00
mcopy_mono_firmware_camera Add commands for controlling a secondary projector. 2019-03-01 20:14:20 -05:00
mcopy_mono_firmware_camera_bolex Add an alternate camera firmware for MONO NO AWARE's JK. 2019-03-01 18:01:45 -05:00
mcopy_mono_firmware_camera_bolex_capper Mcopy firmware with optional capper feature 2022-07-17 11:05:20 -04:00
mcopy_mono_firmware_projectors Use the correct identifier on projectors 2023-07-03 20:33:18 -04:00
mcopy_mono_firmware_projectors_secondary on site work at MONO 2023-07-01 16:34:07 -04:00
mcopy_projector_firmware Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
oxberry_firmware Filmout release 1.5.0. 2020-01-20 01:37:38 -05:00