| .. |
|
components
|
Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging.
|
2023-06-17 11:40:56 -04:00 |
|
intval2_connector_firmware
|
intval2 connector firmware
|
2021-03-19 14:09:46 -04:00 |
|
lib/McopySerial
|
Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging.
|
2023-06-17 11:40:56 -04:00 |
|
mcopy_JKMM99
|
Edit addresses the issue implied by #52. In simple tests with improvised hardware, frame cannot complete in less than 450ms, which is half a full frame. Will add another check to proj_stop() to evaluate the time elapsed and throw an error if too high or low (+/- 20%)
|
2020-09-29 15:13:22 -04:00 |
|
mcopy_JKMM99_intval
|
Fixed projector function
|
2020-10-03 21:32:16 -04:00 |
|
mcopy_JKMM100
|
Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging.
|
2023-06-17 11:40:56 -04:00 |
|
mcopy_arri_s_DC_firmware
|
Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.
|
2022-10-28 11:28:30 -04:00 |
|
mcopy_arri_s_firmware
|
Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging.
|
2023-06-17 11:40:56 -04:00 |
|
mcopy_cam_canon_ble
|
fix reference to cmdChar
|
2023-06-28 20:01:53 -04:00 |
|
mcopy_cam_canon_ble_nano
|
Structure of both sketches is complete, need to test on hardware
|
2023-06-28 15:06:11 -04:00 |
|
mcopy_cam_firmware
|
Mcopy camera firmware
|
2020-07-01 18:03:20 -04:00 |
|
mcopy_cam_relay
|
State string should start and end with the character
|
2023-06-17 13:08:00 -04:00 |
|
mcopy_firmware
|
Solid state relay version of the mcopy jk firmware
|
2018-01-22 22:05:10 -05:00 |
|
mcopy_jk_firmware
|
Momentary switch delay was too long.
|
2018-07-03 14:25:36 -04:00 |
|
mcopy_mono_firmware_camera
|
Add commands for controlling a secondary projector.
|
2019-03-01 20:14:20 -05:00 |
|
mcopy_mono_firmware_camera_bolex
|
Add an alternate camera firmware for MONO NO AWARE's JK.
|
2019-03-01 18:01:45 -05:00 |
|
mcopy_mono_firmware_camera_bolex_capper
|
Mcopy firmware with optional capper feature
|
2022-07-17 11:05:20 -04:00 |
|
mcopy_mono_firmware_projectors
|
Use the correct identifier on projectors
|
2023-07-03 20:33:18 -04:00 |
|
mcopy_mono_firmware_projectors_secondary
|
on site work at MONO
|
2023-07-01 16:34:07 -04:00 |
|
mcopy_projector_firmware
|
Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging.
|
2023-06-17 11:40:56 -04:00 |
|
oxberry_firmware
|
Filmout release 1.5.0.
|
2020-01-20 01:37:38 -05:00 |
35b67f1815