16mm
/
mcopy
1
0
Fork 0
Code Issues 14 Pull Requests Projects 2 Releases 13 Wiki Activity
1,131 Commits 1 Branch 17 Tags 52 MiB
Commit Graph

162 Commits

Author SHA1 Message Date
Matt McWilliams 7f98d6028b Commit all work in progress 2023-09-21 21:06:31 -04:00
Matt McWilliams 0b880a5e79 Add accurateRead functions and Readme 2023-09-06 15:41:36 -04:00
Matt McWilliams eec7765e73 Restore settings logic 2023-08-30 01:18:10 -04:00
Matt McWilliams 03f2b55762 Fucked up the merge 2023-08-29 23:33:42 -04:00
Matt McWilliams d7a10f9737 Enable different modes of stepping by using the settings pins. Previously was causing odd behavior because they were being used for LEDs. 2023-08-29 19:48:49 -04:00
Matt McWilliams dcbb57f732 Rewrite mcopy_projector_firmware with AccelStepper, replacing the custom Itead firmware (not working) 2023-08-29 15:33:51 -04:00
Matt McWilliams 24fe1e8773 Work on projector: Still having issues with IteadDualStepperShield (addresses wrong motor, wrong number of steps). 2023-08-25 16:44:28 -04:00
Matt McWilliams 141d27599f McopyProjector lib for mcopy_projector_firmware rewrite in progress. 2023-08-23 15:21:50 -04:00
Matt McWilliams a173cf0d7c WIP 2023-07-23 20:00:42 -04:00
Matthew McWilliams 5133295f38 Save JKMM100 work 2023-07-08 19:44:57 -04:00
Matt McWilliams a7db072dc6 Accept exposure targets as string arguments to be parsed 2023-07-05 14:46:43 -04:00
Matt McWilliams 58ce079330 Both components are working properly. 2023-07-04 22:46:37 -04:00
Matthew McWilliams 35b67f1815 Use the correct identifier on projectors 2023-07-03 20:33:18 -04:00
Matthew McWilliams 6d379d284b on site work at MONO 2023-07-01 16:34:07 -04:00
Matt McWilliams 2c21110b97 fix reference to cmdChar 2023-06-28 20:01:53 -04:00
Matt McWilliams 777db577d7 Structure of both sketches is complete, need to test on hardware 2023-06-28 15:06:11 -04:00
Matt McWilliams bf320216cf REmove remaining components from ble 2023-06-28 12:43:24 -04:00
Matt McWilliams b48c498574 Remove unneeded components from both ble sketches 2023-06-28 12:41:54 -04:00
Matt McWilliams 0b71da8e7b Canon BLE two-Arduino rewrite WIP 2023-06-27 23:16:16 -04:00
Matt McWilliams 95ede98623 State string should start and end with the character 2023-06-17 13:08:00 -04:00
Matt McWilliams 3881dd4891 Update McopySerial to have a sendStr method, which is distinct from print, which should be used for debug logging. 2023-06-17 11:40:56 -04:00
Matt McWilliams 80a9c23f4d Speed down the motors 2023-05-26 07:09:00 -04:00
Matt McWilliams 49ad3c28a8 Only print projector time to state 2023-05-25 10:45:44 -04:00
Matt McWilliams a29c85628c Add bones of the dual stepper motor, JK compatible projector firmware. 2023-05-25 10:43:45 -04:00
Matt McWilliams cc806cbe52 Initialize and connect only after mcopyserial connects. 2023-04-20 22:50:48 -04:00
Matt McWilliams 8f7a40075a Add connected and identified member booleans to determine when fully connected to mcopy. 2023-04-20 22:37:37 -04:00
Matt McWilliams 144b408092 Print state in the arri-s firmware 2023-04-17 16:44:04 -04:00
Matt McWilliams ca22a3ba4b Rewrite arri_s_firmware to use McopySerial 2023-04-16 16:42:00 -04:00
Matt McWilliams ef54e61494 Use McopySerial in mcopy_arri_s_firmware 2023-04-15 22:44:33 -04:00
Matt McWilliams b1745c786b Invert logic for use with solid state relays rather than standard 2023-04-14 19:48:20 -04:00
Matt McWilliams 83efbc18c7 Fix mcopy_cam_canon_ble 2023-04-13 20:39:24 -04:00
Matthew McWilliams f47396e48c Need confirmation after mcopy_cam_relay 2023-04-12 15:25:41 -04:00
Matt McWilliams 03c27a9226 Relay logic was reversed 2023-04-12 15:15:41 -04:00
Matt McWilliams 08655898d4 Merge remote-tracking branch 'origin/canon_ble' into canon_ble 2023-04-12 14:52:40 -04:00
Matt McWilliams 5d347d23e4 Correctly reference backward LED 2023-04-12 14:52:35 -04:00
Matthew McWilliams a25d93ec55 Correctly delay between frames. 2023-04-12 14:52:05 -04:00
Matthew McWilliams bbf0cbd1c6 Add the button to the relay sketch 2023-04-11 23:43:35 -04:00
Matthew McWilliams 4aceeac1c2 Remove libraries required by TickTwo. This sketch will not use blink in this fashion ATM. 2023-04-11 23:26:12 -04:00
Matt McWilliams 1f5bb85304 Correctly reference LEDs 2023-04-11 22:39:44 -04:00
Matthew McWilliams 087fd3f763 Complete the mcopy relay sketch without variable exposure. 2023-04-11 01:13:44 -04:00
Matthew McWilliams daece3b45a Add the new mcopy_cam_relay script. 2023-04-11 00:38:06 -04:00
Matthew McWilliams 9016062f70 Rename mcopy_cam_canon to mcopy_cam_canon_ble to differentiate 2023-04-11 00:28:27 -04:00
Matthew McWilliams a6de66eb66 Blink LED on startup 2023-04-11 00:24:39 -04:00
Matt McWilliams 6ada6b08ed Add LED features to projector firmware. 2023-04-10 23:28:02 -04:00
Matt McWilliams 461add1cda Start adding LEDs 2023-03-26 16:06:08 -04:00
Matt McWilliams 231c354cb1 Update McopySerial usage in both scripts that use it. 2023-03-21 20:38:45 -04:00
Matt McWilliams 4e0149e752 Fixed issue with baud being stored as const overflowed. Silly mistake. 
Also storing command chars as public const variables to shorten code and allow for mc.COMMAND rather than McopySerial::COMMAND. Cleans up example code a lot.
 2023-03-21 20:35:00 -04:00
Matt McWilliams 5c6b9191e5 Work in progress: Serial does not work from external library 2023-03-20 19:45:32 -04:00
Matt McWilliams 77a0f7d8a0 Use the correct pins for the projector 2023-03-18 17:36:24 -04:00
Matt McWilliams 9faae6fc36 Create the first state sender. 2023-03-18 17:25:58 -04:00