585e776e3e
Small refactor to intval_2_1_serial
2016-07-04 23:11:04 -04:00
08fb6353db
Add comments to code identifying command structure
2016-07-02 10:39:58 -04:00
cdc0309d65
Serial version of the INTVAL 2.1 code
2016-05-31 11:42:59 -04:00
5be6268811
Create a motor cap for the 120RPM motor
2016-05-23 13:21:31 -04:00
1e1d113f4e
Update standoffs to better attach to panel
...
Having built a number of these, attaching the standoffs is a problem.
This is an attempt to better attach them to the panel.
2016-05-17 10:19:35 -04:00
5624d4fd01
Add height to motor_key_120
...
Also adjust the bottom of the hobbled shaft negative space so that the
motor is required to put some force against the camera body.
2016-05-13 15:14:02 -04:00
d3f6d50bc7
Place motor key 120 in correct /dist folder
2016-05-13 11:59:52 -04:00
694ba5d7b5
Redesigned 120RPM motor_key
...
Needed to make it taller to have a better grip on the hobbled shaft.
This change shifts the bolt that rests against the flat end of the
shaft upwards, as well. May need to lift the bottom of the shaft
negative space for more pressure against the key.
2016-05-13 00:00:34 -04:00
08257cbadb
Only use loop delay when not running, delaying or during a sequence
2016-05-12 22:49:09 -04:00
24baf8ae4d
Remove typo in SLOW_PWM variable
2016-05-12 22:05:25 -04:00
ed075bbfa9
Sequence no longer ends with an erroneous frame
...
Moved the sequence start and stop logic into the button_end function.
This will allow the sequence to stop without firing a final frame after
the sequence is done. Also added variables to define the speed of the
motors a little more easily.
2016-05-12 22:04:39 -04:00
59a696f6aa
Remove delay() from Frame() and inter-frame delay
...
This gives the user the ability to stop sequences between exposures, or
during them.
2016-05-12 16:10:19 -04:00
291ae33595
Remove timer code, was doing nothing
...
Will restore timer for Metro version of the firmware for profiling
different motors. Doesn’t make sense here where the Trinket Pro can’t
serial out.
2016-05-12 13:48:59 -04:00
e85e542723
Start single frame when plunger released
...
as opposed to when it is first pressed. It is with great consternation
that I make this change. The original intention of the Trigger()
feature was to be instant, but having used the intervalometer on
several rolls now, I find the extra frame that this feature introduces
into sequences to be troublesome.
2016-05-11 21:05:03 -04:00
6f82eb6bf1
Make standoffs insert into laser cut panel
...
This change will improve the physical structure of the panel. The
standoffs will fit into enlarged holes in the panel so they can be
glued to it.
2016-05-09 18:23:17 -04:00
0466262a02
Move stl into dist folder
2016-04-21 15:31:48 -04:00
0d01794176
Add electronics mount for Adafruit Metro Mini
...
Printed it, it works.
2016-04-21 12:10:46 -04:00
4f6e200076
Add an altered version of the electronics mount for Arduino Metro Minis
2016-04-15 00:02:11 -04:00
5b1de86b11
Move set screw to internal position in 120 key
2016-04-09 19:41:45 -04:00
fa051804cf
Primary work on 120RPM motor mount
2016-04-04 17:51:16 -04:00
77f2fee695
wider opening for motor mount
2016-04-04 11:58:03 -04:00
c3f9ef1001
Increase resolution
2016-04-02 22:47:23 -04:00
2d044f33ff
Made changes for 120RPM motors
2016-04-02 22:46:01 -04:00
c5791a8672
Added alt motor_keys for different 1:1 shaft sizes
2016-03-29 15:00:32 -04:00
1f21d1a7d9
Add most of the photos to the docs
2016-03-29 15:00:05 -04:00
0b548bc315
Add photo of finished build
2016-03-25 13:38:16 -04:00
9b28e52d28
Improved motor key to allow hobbled shaft insertion
2016-03-25 11:37:48 -04:00
e56417c33d
Fix photo markup
2016-03-24 15:28:49 -04:00
2b09bede05
Additional documentation work
2016-03-22 18:10:21 -04:00
33b0794263
Add exploded view for construction
2016-03-22 18:03:05 -04:00
44a0934a5a
Add dxf plate
2016-03-22 16:18:13 -04:00
04ffaa273a
optimized plate layout for 150x150mm printer
2016-03-22 13:15:52 -04:00
f2eaf171e2
Added plate of all printable models
2016-03-21 18:16:34 -04:00
2c07c6e92f
Add link to fritzing schematic
2016-03-21 17:18:40 -04:00
88aa993686
Improve schematics layout
...
Still ugly as sin
2016-03-21 16:21:24 -04:00
2b1a2c1751
Frizzing diagram completed
2016-03-18 23:57:49 -04:00
0b627aba34
Placeholders for photos
2016-03-18 23:57:38 -04:00
d5c27de8c4
Import L298N model
2016-03-18 18:09:06 -04:00
58ab992ab9
Code cleanup
2016-03-18 18:05:56 -04:00
f5facf735e
Intval2 fritzing file, initial commit
2016-03-18 17:03:12 -04:00
c22af1d248
Proof reading of Readme.md
2016-03-18 16:52:43 -04:00
4f31097051
Add first pass at assembly documentation
...
Include rough draft of assembly instructions
Establish structure to be backed up with images
2016-03-16 19:34:32 -04:00
3915fe9ba0
Corrected broken links
2016-03-16 16:59:38 -04:00
70687cce34
Link everything
...
in Readme.md
2016-03-15 21:10:21 -04:00
bda38a389e
Better linking
2016-03-15 21:07:24 -04:00
b47d305364
Add test anchor
2016-03-15 21:05:45 -04:00
ddeed1930d
Add all /dist files
...
Includes dxf and stl files needed to build the INTVAL 2.0
2016-02-29 17:13:30 -05:00
07ef60133e
Clean up scad file for /dist
2016-02-29 17:12:48 -05:00
5fd6f9e4fd
Remove stale Arduino code
...
Included a non-viable AFSK-controlled version of the intval
2016-02-29 16:49:14 -05:00
8d120aeb02
Remove AFSK webapp
2016-02-29 16:43:11 -05:00
Matt
Matt
Matt McWilliams
Matt
Matt