3.3 KiB
3.3 KiB
| 1 | module | quantity | part | part_id | description |
|---|---|---|---|---|---|
| 2 | contact_printer | 1040 | 2020 Aluminum extrusion mm | N/A | Sides and central frame 4x 260mm |
| 3 | contact_printer | 840 | 2020 Aluminum extrusion mm | N/A | Top and bottom frame 2x 420mm |
| 4 | contact_printer_knob | 14 | M4 hex nut | N/A | Secure knob to M4 bolts |
| 5 | electronics_panel | 4 | M3 hex cap bolt 6mm | N/A | Attach the GPIO breakout board to the panel |
| 6 | electronics_panel | 1 | ESP32 GPIO breakout board | N/A | To make the ESP32 dev board easier to wire |
| 7 | electronics_panel | 6 | M3 sliding t slot nut | N/A | Attach the frame to the electronics_panel |
| 8 | electronics_panel | 6 | M3 hex cap bolt 8mm | N/A | Attach the electronics_panel to the frame |
| 9 | electronics_panel | 1 | L298N Motor driver module | N/A | Control the 3 motors using 2 channels |
| 10 | electronics_panel | 1 | ESP32 Dev board | N/A | Control the contact_printer |
| 11 | lamp_LEDs | 6 | 5mm White LED | N/A | Light source |
| 12 | lamp_LEDs | 6 | 220 Ohm Resistor | N/A | Provide resistance for LEDs |
| 13 | sprocketed_roller_invert_solid | 1 | 608-RS Ball Bearing | 608-RS | Reduces wobble in the rollers spin |
| 14 | sprocketed_roller_invert_solid | 1 | M3 hex cap bolt 12mm | N/A | Attaches the sprocketed_roller_invert_solid to the geared motor |
| 15 | corner_foot | 32 | M3 sliding t slot nut | N/A | Attach the frame to the corner_foot |
| 16 | corner_foot | 32 | M3 hex cap bolt 8mm | N/A | Attach the corner_foot to the frame |
| 17 | feed_panel_stock | 7 | M3 sliding t slot nut | N/A | Attach the frame to the takeup_panel_stock |
| 18 | feed_panel_stock | 7 | M3 hex cap bolt 8mm | N/A | Attach the takeup_panel_stock to the frame |
| 19 | feed_panel_stock | 3 | M4 hex bolt 35mm | N/A | Attach the feed_panel_motor_mount to the panel |
| 20 | feed_panel_picture | 7 | M3 sliding t slot nut | N/A | Attach the frame to the takeup_panel_stock |
| 21 | feed_panel_picture | 7 | M3 hex cap bolt 8mm | N/A | Attach the takeup_panel_stock to the frame |
| 22 | feed_panel_picture | 3 | M4 hex bolt 35mm | N/A | Attach the feed_panel_motor_mount to the panel |
| 23 | takeup_panel_stock_motor_mount | 4 | M3 hex cap bolt 8mm | N/A | Attach the motor to the takeup_panel_stock_motor_mount |
| 24 | takeup_panel_stock_motor_mount | 3 | M4 hex nut | N/A | Attach the takeup_panel_picture_motor_mount to the panel |
| 25 | takeup_panel_stock | 3 | M4 hex bolt 25mm | N/A | Attach the panel to the takeup_panel_stock_motor_mount |
| 26 | takeup_panel_stock | 7 | M3 sliding t slot nut | N/A | Attach the frame to the takeup_panel_stock |
| 27 | takeup_panel_stock | 7 | M3 hex cap bolt 8mm | N/A | Attach the takeup_panel_stock to the frame |
| 28 | takeup_panel_stock | 1 | 250RPM DC geared motor | JSX40-370 | Drive the takeup of the stock pathway |
| 29 | takeup_panel_picture_motor_mount | 4 | M3 hex cap bolt 8mm | N/A | Attach the motor to the takeup_panel_picture_motor_mount |
| 30 | takeup_panel_picture_motor_mount | 3 | M4 hex nut | N/A | Attach the takeup_panel_picture_motor_mount to the panel |
| 31 | takeup_panel_picture | 3 | M4 hex bolt 25mm | N/A | Attach the panel to the takeup_panel_picture_motor_mount |
| 32 | takeup_panel_picture | 7 | M3 sliding t slot nut | N/A | Attach the frame to the takeup_panel_picture |
| 33 | takeup_panel_picture | 7 | M3 hex cap bolt 8mm | N/A | Attach the takeup_panel_picture to the frame |
| 34 | takeup_panel_picture | 1 | 250RPM DC geared motor | JSX40-370 | Drive the takeup of the picture pathway |
| 35 | panel | 4 | M4 hex bolt 25mm | N/A | Attach the lamp to the panel |
| 36 | panel | 4 | M4 hex bolt 50mm | N/A | Attach the lamp to the panel |
| 37 | panel | 1 | 100RPM DC geared motor with encoder | N/A | Drive the sprocketed_roller |
| 38 | panel | 6 | M3 sliding t slot nut | N/A | Attach aluminum extrusions to panel |
| 39 | panel | 6 | M3 hex cap bolt 8mm | N/A | Attach panel to aluminum extrusions |
| 40 | panel | 4 | M3 hex cap bolt 6mm | N/A | Attach encoder motor to panel |