16mm
/
contact_printer
1
0
Fork 0
Code Issues 5 Pull Requests Projects Releases Wiki Activity

Takeup stock panel and motoro mount are the same as original

This commit is contained in:
Matt McWilliams 2023-05-20 09:43:21 -04:00
parent 880992b2bf
commit cc26ca318d
1 changed files with 28 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
scad/contact_printer.scad
View File

@ -60,6 +60,8 @@ TakeupCenterColumnZ = 24.25;
TakeupMotorMountX = 31;
TakeupMotorMountY = 31;
TakeupMotorPanelZ = -26;
RollerY = -20;
LampY = 20;
@ -157,7 +159,7 @@ module debug () {
UseDaylight = true;
translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase);
sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase);
//translate([50, 0, 0]) cube([100, 100, 100], center = true);
}
//lamp
@ -221,8 +223,8 @@ module debug () {
rotate([0, 0, BearingRotateZ4]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
}
centered_geared_motor([ReelX, ReelY, TakeupMotorZ], [180, 0, PictureTakeupMotorRotationZ]);
centered_geared_motor([ReelX, -ReelY, TakeupMotorZ], [180, 0, StockTakeupMotorRotationZ]);
//centered_geared_motor([ReelX, ReelY, TakeupMotorZ], [180, 0, PictureTakeupMotorRotationZ]);
//centered_geared_motor([ReelX, -ReelY, TakeupMotorZ], [180, 0, StockTakeupMotorRotationZ]);
//translate([0, 0, DaylightZ]) color("red", 0.25) cube([250, 100, 16], center = true);
@ -557,8 +559,8 @@ module takeup_panel_motor_mount_m4_bolt_void (pos = [0, 0, 0], rot = [0, 0, 0],
}
}
module takeup_panel_motor_mount_m4_bolts_voids (pos = [0, 0, 0]) {
translate(pos) {
module takeup_panel_motor_mount_m4_bolts_voids (pos = [0, 0, 0], rot = [0, 0, 0]) {
translate(pos) rotate(rot) {
takeup_panel_motor_mount_m4_bolt_void([TakeupMotorMountX, 0, 0], [0, 0, 30]);
takeup_panel_motor_mount_m4_bolt_void([-TakeupMotorMountX, 0, 0], [0, 0, 30]);
takeup_panel_motor_mount_m4_bolt_void([0, TakeupMotorMountY, 0]);
@ -572,8 +574,8 @@ module takeup_panel_motor_mount_pad (pos = [0, 0, 0], rot = [0, 0, 0]) {
}
}
module takeup_panel_motor_mount_pads (pos = [0, 0, 0]) {
translate(pos) {
module takeup_panel_motor_mount_pads (pos = [0, 0, 0], rot = [0, 0, 0]) {
translate(pos) rotate(rot) {
takeup_panel_motor_mount_pad([TakeupMotorMountX, 0, 0], [0, 0, 180]);
takeup_panel_motor_mount_pad([-TakeupMotorMountX, 0, 0], [0, 0, 0]);
takeup_panel_motor_mount_pad([0, TakeupMotorMountY, 0], [0, 0, -90]);
@ -632,7 +634,7 @@ module takeup_panel_picture_motor_mount (pos = [0, 0, 0] ) {
translate([10, 0, 0]) cube([50, 27, 10], center = true);
}
}
takeup_mount_panel([0, 0, -26], [0, 0, PictureTakeupMotorRotationZ]);
takeup_mount_panel([0, 0, TakeupMotorPanelZ], [0, 0, PictureTakeupMotorRotationZ]);
}
}
}
@ -644,8 +646,8 @@ module takeup_panel_stock (pos = [0, 0, 0]) {
translate(pos) {
difference() {
union(){
translate([12.5, 12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true);
translate([-(TakeupPanelX/2) + 2.5, (TakeupPanelY/2) - 10, 0]) cube([OtherX, OtherY, PanelZ], center = true);
translate([12.5, -12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true);
translate([-(TakeupPanelX/2) + 2.5, -(TakeupPanelY/2) + 10, 0]) cube([OtherX, OtherY, PanelZ], center = true);
takeup_panel_bearings_posts([TakeupPanelStockOffsetX, 0, 4.25]);
}
translate([TakeupPanelStockOffsetX, 0, 0]) cylinder(r = R(TakeupCenterVoidD), h = 50, center = true, $fn = 100);
@ -653,13 +655,13 @@ module takeup_panel_stock (pos = [0, 0, 0]) {
//takeup_panel_bearings_voids([TakeupPanelStockOffsetX, 0, 0]);
takeup_panel_bearings_bolts_voids([TakeupPanelStockOffsetX, 0, 5]);
//bolts
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX, (TakeupPanelY / 2) + 2.5, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), 2.5 - 20, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), 2.5 + 20, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX, -(TakeupPanelY / 2) - 2.5, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), -2.5 + 20, 0]);
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), -2.5 - 20, 0]);
takeup_panel_motor_mount_m4_bolts_voids([TakeupPanelStockOffsetX, 0, -8.99]);
takeup_panel_motor_mount_m4_bolts_voids([TakeupPanelStockOffsetX, 0, -8.99], [0, 0, 180]);
}
@ -673,22 +675,25 @@ module takeup_panel_stock_motor_mount (pos = [0, 0, 0] ) {
union () {
translate([0, 0, -(PanelZ/2) - (TakeupCenterColumnZ/2)]) cylinder(r = R(TakeupCenterColumnD), h = TakeupCenterColumnZ, center = true, $fn = 100);
translate([0, 0, -16]) cylinder(r = R(TakeupCenterColumnD), h = 3, center = true, $fn = 100);
takeup_panel_motor_mount_pads([0, 0, -5.5]);
takeup_panel_motor_mount_pads([0, 0, -5.5], [0, 0, 180]);
}
translate([0, 0, -16]) cylinder(r = R(15), h = 3 + 1, center = true, $fn = 100);
translate([0, 0, -8]) cylinder(r = R(TakeupCenterVoidD), h = TakeupCenterColumnZ, center = true, $fn = 100);
translate([0, 0, -16]) cylinder(r = R(15), h = TakeupCenterColumnZ, center = true, $fn = 100);
translate([0, 0, -9]) cylinder(r = R(TakeupCenterVoidD), h = TakeupCenterColumnZ, center = true, $fn = 100);
//bearings
takeup_panel_bearings_voids();
translate([2.55, -7.1, -17]) rotate([0, 0, PictureTakeupMotorRotationZ]) {
translate([-2.55, 7.1, -17-6]) rotate([0, 0, StockTakeupMotorRotationZ]) {
takeup_panel_motor_mount_bolt_void([MotorMountX, MotorMountY, 0]);
takeup_panel_motor_mount_bolt_void([-MotorMountX, MotorMountY, 0]);
takeup_panel_motor_mount_bolt_void([MotorMountX, -MotorMountY, 0]);
takeup_panel_motor_mount_bolt_void([-MotorMountX, -MotorMountY, 0]);
}
takeup_panel_motor_mount_m4_bolts_voids([0, 0, -8.99]);
takeup_panel_motor_mount_m4_bolts_voids([0, 0, -8.99], [0, 0, 180]);
translate([0, 0, -29]) rotate([0, 0, StockTakeupMotorRotationZ]){
translate([10, 0, 0]) cube([50, 27, 10], center = true);
}
}
takeup_mount_panel([0, 0, -20], [0, 0, PictureTakeupMotorRotationZ]);
takeup_mount_panel([0, 0, TakeupMotorPanelZ], [0, 0, StockTakeupMotorRotationZ]);
}
}
}
@ -721,7 +726,7 @@ module corner_foot (pos = [0, 0, 0], rot = [0, 0, 0]) {
}
}
PART = "takeup_panel_picture_motor_mount";
PART = "";
LIBRARY = true;
if (PART == "panel") {