From cc26ca318dc3676049bd6f19f163e47515f673f3 Mon Sep 17 00:00:00 2001 From: mattmcw Date: Sat, 20 May 2023 09:43:21 -0400 Subject: [PATCH] Takeup stock panel and motoro mount are the same as original --- scad/contact_printer.scad | 51 +++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 23 deletions(-) diff --git a/scad/contact_printer.scad b/scad/contact_printer.scad index c03c0f4..f99a535 100644 --- a/scad/contact_printer.scad +++ b/scad/contact_printer.scad @@ -60,6 +60,8 @@ TakeupCenterColumnZ = 24.25; TakeupMotorMountX = 31; TakeupMotorMountY = 31; +TakeupMotorPanelZ = -26; + RollerY = -20; LampY = 20; @@ -157,7 +159,7 @@ module debug () { UseDaylight = true; translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () { - sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase); + sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase); //translate([50, 0, 0]) cube([100, 100, 100], center = true); } //lamp @@ -221,8 +223,8 @@ module debug () { rotate([0, 0, BearingRotateZ4]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]); } - centered_geared_motor([ReelX, ReelY, TakeupMotorZ], [180, 0, PictureTakeupMotorRotationZ]); - centered_geared_motor([ReelX, -ReelY, TakeupMotorZ], [180, 0, StockTakeupMotorRotationZ]); + //centered_geared_motor([ReelX, ReelY, TakeupMotorZ], [180, 0, PictureTakeupMotorRotationZ]); + //centered_geared_motor([ReelX, -ReelY, TakeupMotorZ], [180, 0, StockTakeupMotorRotationZ]); //translate([0, 0, DaylightZ]) color("red", 0.25) cube([250, 100, 16], center = true); @@ -557,8 +559,8 @@ module takeup_panel_motor_mount_m4_bolt_void (pos = [0, 0, 0], rot = [0, 0, 0], } } -module takeup_panel_motor_mount_m4_bolts_voids (pos = [0, 0, 0]) { - translate(pos) { +module takeup_panel_motor_mount_m4_bolts_voids (pos = [0, 0, 0], rot = [0, 0, 0]) { + translate(pos) rotate(rot) { takeup_panel_motor_mount_m4_bolt_void([TakeupMotorMountX, 0, 0], [0, 0, 30]); takeup_panel_motor_mount_m4_bolt_void([-TakeupMotorMountX, 0, 0], [0, 0, 30]); takeup_panel_motor_mount_m4_bolt_void([0, TakeupMotorMountY, 0]); @@ -572,8 +574,8 @@ module takeup_panel_motor_mount_pad (pos = [0, 0, 0], rot = [0, 0, 0]) { } } -module takeup_panel_motor_mount_pads (pos = [0, 0, 0]) { - translate(pos) { +module takeup_panel_motor_mount_pads (pos = [0, 0, 0], rot = [0, 0, 0]) { + translate(pos) rotate(rot) { takeup_panel_motor_mount_pad([TakeupMotorMountX, 0, 0], [0, 0, 180]); takeup_panel_motor_mount_pad([-TakeupMotorMountX, 0, 0], [0, 0, 0]); takeup_panel_motor_mount_pad([0, TakeupMotorMountY, 0], [0, 0, -90]); @@ -632,7 +634,7 @@ module takeup_panel_picture_motor_mount (pos = [0, 0, 0] ) { translate([10, 0, 0]) cube([50, 27, 10], center = true); } } - takeup_mount_panel([0, 0, -26], [0, 0, PictureTakeupMotorRotationZ]); + takeup_mount_panel([0, 0, TakeupMotorPanelZ], [0, 0, PictureTakeupMotorRotationZ]); } } } @@ -644,8 +646,8 @@ module takeup_panel_stock (pos = [0, 0, 0]) { translate(pos) { difference() { union(){ - translate([12.5, 12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true); - translate([-(TakeupPanelX/2) + 2.5, (TakeupPanelY/2) - 10, 0]) cube([OtherX, OtherY, PanelZ], center = true); + translate([12.5, -12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true); + translate([-(TakeupPanelX/2) + 2.5, -(TakeupPanelY/2) + 10, 0]) cube([OtherX, OtherY, PanelZ], center = true); takeup_panel_bearings_posts([TakeupPanelStockOffsetX, 0, 4.25]); } translate([TakeupPanelStockOffsetX, 0, 0]) cylinder(r = R(TakeupCenterVoidD), h = 50, center = true, $fn = 100); @@ -653,13 +655,13 @@ module takeup_panel_stock (pos = [0, 0, 0]) { //takeup_panel_bearings_voids([TakeupPanelStockOffsetX, 0, 0]); takeup_panel_bearings_bolts_voids([TakeupPanelStockOffsetX, 0, 5]); //bolts - takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX, (TakeupPanelY / 2) + 2.5, 0]); - takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]); - takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]); - takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), 2.5 - 20, 0]); - takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), 2.5 + 20, 0]); + takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX, -(TakeupPanelY / 2) - 2.5, 0]); + takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]); + takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]); + takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), -2.5 + 20, 0]); + takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), -2.5 - 20, 0]); - takeup_panel_motor_mount_m4_bolts_voids([TakeupPanelStockOffsetX, 0, -8.99]); + takeup_panel_motor_mount_m4_bolts_voids([TakeupPanelStockOffsetX, 0, -8.99], [0, 0, 180]); } @@ -673,22 +675,25 @@ module takeup_panel_stock_motor_mount (pos = [0, 0, 0] ) { union () { translate([0, 0, -(PanelZ/2) - (TakeupCenterColumnZ/2)]) cylinder(r = R(TakeupCenterColumnD), h = TakeupCenterColumnZ, center = true, $fn = 100); translate([0, 0, -16]) cylinder(r = R(TakeupCenterColumnD), h = 3, center = true, $fn = 100); - takeup_panel_motor_mount_pads([0, 0, -5.5]); + takeup_panel_motor_mount_pads([0, 0, -5.5], [0, 0, 180]); } - translate([0, 0, -16]) cylinder(r = R(15), h = 3 + 1, center = true, $fn = 100); - translate([0, 0, -8]) cylinder(r = R(TakeupCenterVoidD), h = TakeupCenterColumnZ, center = true, $fn = 100); + translate([0, 0, -16]) cylinder(r = R(15), h = TakeupCenterColumnZ, center = true, $fn = 100); + translate([0, 0, -9]) cylinder(r = R(TakeupCenterVoidD), h = TakeupCenterColumnZ, center = true, $fn = 100); //bearings takeup_panel_bearings_voids(); - translate([2.55, -7.1, -17]) rotate([0, 0, PictureTakeupMotorRotationZ]) { + translate([-2.55, 7.1, -17-6]) rotate([0, 0, StockTakeupMotorRotationZ]) { takeup_panel_motor_mount_bolt_void([MotorMountX, MotorMountY, 0]); takeup_panel_motor_mount_bolt_void([-MotorMountX, MotorMountY, 0]); takeup_panel_motor_mount_bolt_void([MotorMountX, -MotorMountY, 0]); takeup_panel_motor_mount_bolt_void([-MotorMountX, -MotorMountY, 0]); } - takeup_panel_motor_mount_m4_bolts_voids([0, 0, -8.99]); + takeup_panel_motor_mount_m4_bolts_voids([0, 0, -8.99], [0, 0, 180]); + translate([0, 0, -29]) rotate([0, 0, StockTakeupMotorRotationZ]){ + translate([10, 0, 0]) cube([50, 27, 10], center = true); + } } - takeup_mount_panel([0, 0, -20], [0, 0, PictureTakeupMotorRotationZ]); + takeup_mount_panel([0, 0, TakeupMotorPanelZ], [0, 0, StockTakeupMotorRotationZ]); } } } @@ -721,7 +726,7 @@ module corner_foot (pos = [0, 0, 0], rot = [0, 0, 0]) { } } -PART = "takeup_panel_picture_motor_mount"; +PART = ""; LIBRARY = true; if (PART == "panel") {