mmcwilliams
2f97b74481
Rubber stopper for JK projector reels
2019-03-13 15:32:17 -04:00
mmcw-dev
5a8001da7a
Render images and gifs of all objects
2019-01-07 20:05:20 -05:00
mmcwilliams
7a44c71c99
Finish all work on notch detector
2018-11-19 12:09:35 -05:00
mmcw-dev
ecb37449e2
Make a laser cut version of the mounting plate.
2018-11-11 18:22:52 -05:00
mmcwilliams
a67fdff297
Steenbeck notch detector add key and base
2018-11-06 15:06:15 -05:00
M McWilliams
78ae30911a
All work from Open Studios
2018-11-06 09:26:29 -05:00
mmcw-dev
4ac70260c1
Steenbeck notch detector work
2018-11-03 03:19:23 -04:00
mmcw-dev
2580830863
16mm looper design
2018-11-03 03:19:14 -04:00
mmcw-dev
11a1263d7b
Bellows board
2018-11-03 03:18:46 -04:00
mmcwilliams
4670f947d4
Spindle top rendered and finsihed.
2018-03-05 16:19:17 -05:00
mmcwilliams
9cae802193
Spindle bottom ALT render
2018-03-05 15:55:58 -05:00
mmcwilliams
46c3c40639
Spindle top rename
2018-03-05 15:55:45 -05:00
mmcwilliams
3c460f9e74
Remove extraneous screw file
2018-03-05 15:21:32 -05:00
mmcwilliams
34f7fb2836
Lomo spindle bottom, ready to rock
2018-03-05 15:20:18 -05:00
mmcwilliams
cebe5d2310
Clean up bottom screw script, add ALT and HEX parameters to change the design.
2018-03-05 14:55:51 -05:00
mmcwilliams
ce5b2b9ff2
REnder entire lomo bottom screw
2018-03-04 19:45:40 -05:00
mmcwilliams
99dae7d92f
Entire bottom screw ready for background render
2018-03-04 19:06:39 -05:00
mmcwilliams
2b088cb35e
Double up the internal threading of the lomo_bottom screw
2018-03-04 19:05:18 -05:00
mmcwilliams
3a4a798469
Remove commented import statements
2018-03-04 18:46:16 -05:00
mmcwilliams
c8c7784075
Test render on headless service
2018-03-04 18:42:22 -05:00
mmcw-dev
1609407e6e
Work on lomo bottom screw
2018-03-04 15:20:44 -05:00
mmcw-dev
ba140daeae
Lomo screw top release candidate.
2018-03-04 11:18:04 -05:00
mmcw-dev
52e8680c1c
Hole added and top bevel added. Print candidate
2018-03-04 09:46:55 -05:00
mmcwilliams
acc1e03390
Tweak measurements, add bevel, add underplate
2018-03-04 09:36:06 -05:00
mmcw-dev
f9e0566812
Top screw ready to print
2018-03-03 10:13:49 -05:00
mmcw-dev
b3baa7a40d
Print new threads
2018-03-02 12:56:46 -05:00
mmcwilliams
3cda00d4cd
Use theirs
2018-03-01 10:38:30 -05:00
mmcw-dev
34a3cb8e85
Top screw ready to print
2018-02-28 19:41:56 -05:00
mmcw-dev
f35f313adc
Lomo bottom screw is ready to re-print. Fixed threading on outer thread, added nubs instead of the simple hex design. Needs internal threading, which will depend on the outer piece.
2018-02-27 23:57:56 -05:00
mmcwilliams
648c1a2eda
compare to half model
2018-02-27 23:18:09 -05:00
mmcwilliams
0ca7062958
edits for comparison
2018-02-27 13:05:27 -05:00
mmcwilliams
453bd81492
Cut screw in have for comparison
2018-02-27 12:21:58 -05:00
mmcwilliams
2dd979ad89
Spindle work
2018-02-27 09:45:46 -05:00
mmcwilliams
523206ca19
Making changes to lomo screw with tests
2018-02-26 23:58:40 -05:00
M McWilliams
2acb7f0dc6
lomo parts, still in progress
2017-12-11 23:01:03 -05:00
mmcwilliams
b66cff8d5c
Add rotation to 3 newest models
2017-10-08 16:51:25 -04:00
mmcwilliams
dcca1b0182
Bolex rewind key handle
...
Handle is broken into 2 pieces, knurled for grip. As seen here:
https://www.shapeways.com/product/PQMJJS9NF/bolex-rewind-key-handle
2017-10-08 15:46:22 -04:00
mmcwilliams
038572839e
Bolex rewind key body
...
This is the rewind key body, featured here:
https://www.shapeways.com/product/EZLWWUHLR/bolex-rewind-key
2017-10-08 15:39:34 -04:00
mmcwilliams
0614465fbb
Add cmount_rear_cap
...
This is a super-simple c-mount cap
2017-10-08 15:20:44 -04:00
mmcwilliams
84154c3014
Remove hot_shoe_mount file added in error
2017-10-08 15:19:54 -04:00
f925f5df61
Add contact printer snoot
2016-07-20 10:08:51 -04:00
2d1976b3cb
Add film drying rack
...
This is a laser cut rack that is capable of holding 34 meters of 16mm.
Uses 1/4” plywood and 5/16” dowels with a 1/2” course threaded rod in
the center. Attached with 6 course nuts to hold everything in place.
2016-06-04 11:14:27 -04:00
381ac73b60
Cleaner hot_shoe_mount render
...
Added time variable to spin it
2016-04-09 13:50:30 -04:00
e63345bea4
Add bolex matte box set
2016-04-09 11:51:56 -04:00
82d8da03fb
Add hot_shoe_mount
...
Basic male hot shoe attachment for use in other projects
2015-12-21 10:13:33 -05:00
131703feb6
Add daylight_spool_holder
...
For holding daylight spools, to be incorporated into other designs.
2015-07-28 15:59:46 -04:00
1a6dacbb64
Make cmount extension tubes render better
2015-07-28 13:21:02 -04:00
4696714763
Clean up diffs on 2in core
...
makes it render a better gif
2015-07-28 13:18:42 -04:00
8c4d66d987
Add cmount extension tubes
...
A script for generating cmount extension tubes of arbitrary lengths
2015-07-17 16:26:25 -04:00
51d61f6c7c
Add s8 to 16mm core adapter
...
For use of a 16mm core on super8 rewinds.
2015-07-17 16:13:44 -04:00
mmcwilliams
Matt McWilliams
Matt
Matt