Prepare for submodules

This commit is contained in:
mmcwilliams 2023-01-16 20:26:21 -05:00
parent 235cc61869
commit 72fa8cdfe5
22 changed files with 7 additions and 806 deletions

View File

@ -1,36 +0,0 @@
/**
* Variables for the Minox16 camera
**/
$fn = 150;
SPACING = 42;
WALL_THICKNESS = 1.25 + .5;
PLANE_BACK = 1.55;
CART_H = 16.85 + .75;
FEED_D = 19.14;
TAKEUP_D = 22.04;
TAKEUP_OFFSET_Y = -(TAKEUP_D - FEED_D) / 2;
CONNECT_X = SPACING - (TAKEUP_D / 2) - (FEED_D / 2) + 2;
CONNECT_Y = 8.85;
CONNECT_Z = 1.3;
CONNECT_OFFSET_X = ((TAKEUP_D / 2) - (FEED_D / 2)) / 2;
CONNECT_OFFSET_Y = (FEED_D / 2) - (CONNECT_Y / 2) - 5.02;
CONNECT_OFFSET_Z = -(CART_H / 2) + (CONNECT_Z / 2);
FILM_NEG_Y = .75;
FILM_NEG_OFFSET_Y = 8.5;
CAP_LIP_H = 5.92;
CAP_LIP = .56;
CAP_THICKNESS = .5;
TOP_H = 1;

View File

@ -1,215 +0,0 @@
/*
Triangles.scad
Author: Tim Koopman
https://github.com/tkoopman/Delta-Diamond/blob/master/OpenSCAD/Triangles.scad
angleCA
/|\
a / H \ c
/ | \
angleAB ------- angleBC
b
Standard Parameters
center: true/false
If true same as centerXYZ = [true, true, true]
centerXYZ: Vector of 3 true/false values [CenterX, CenterY, CenterZ]
center must be left undef
height: The 3D height of the Triangle. Ignored if heights defined
heights: Vector of 3 height values heights @ [angleAB, angleBC, angleCA]
If CenterZ is true each height will be centered individually, this means
the shape will be different depending on CenterZ. Most times you will want
CenterZ to be true to get the shape most people want.
*/
/*
Triangle
a: Length of side a
b: Length of side b
angle: angle at point angleAB
*/
module Triangle(
a, b, angle, height=1, heights=undef,
center=undef, centerXYZ=[false,false,false])
{
// Calculate Heights at each point
heightAB = ((heights==undef) ? height : heights[0])/2;
heightBC = ((heights==undef) ? height : heights[1])/2;
heightCA = ((heights==undef) ? height : heights[2])/2;
centerZ = (center || (center==undef && centerXYZ[2]))?0:max(heightAB,heightBC,heightCA);
// Calculate Offsets for centering
offsetX = (center || (center==undef && centerXYZ[0]))?((cos(angle)*a)+b)/3:0;
offsetY = (center || (center==undef && centerXYZ[1]))?(sin(angle)*a)/3:0;
pointAB1 = [-offsetX,-offsetY, centerZ-heightAB];
pointAB2 = [-offsetX,-offsetY, centerZ+heightAB];
pointBC1 = [b-offsetX,-offsetY, centerZ-heightBC];
pointBC2 = [b-offsetX,-offsetY, centerZ+heightBC];
pointCA1 = [(cos(angle)*a)-offsetX,(sin(angle)*a)-offsetY, centerZ-heightCA];
pointCA2 = [(cos(angle)*a)-offsetX,(sin(angle)*a)-offsetY, centerZ+heightCA];
polyhedron(
points=[ pointAB1, pointBC1, pointCA1,
pointAB2, pointBC2, pointCA2 ],
triangles=[
[0, 1, 2],
[3, 5, 4],
[0, 3, 1],
[1, 3, 4],
[1, 4, 2],
[2, 4, 5],
[2, 5, 0],
[0, 5, 3] ] );
}
/*
Isosceles Triangle
Exactly 2 of the following paramaters must be defined.
If all 3 defined H will be ignored.
b: length of side b
angle: angle at points angleAB & angleBC.
*/
module Isosceles_Triangle(
b, angle, H=undef, height=1, heights=undef,
center=undef, centerXYZ=[true, false, false])
{
valid = (angle!=undef)?((angle < 90) && (b!=undef||H!=undef)) : (b!=undef&&H!=undef);
ANGLE = (angle!=undef) ? angle : atan(H / (b/2));
a = (b==undef)?(H/sin((180-(angle*2))/2)) :
(b / cos(ANGLE))/2;
B = (b==undef)? (cos(angle)*a)*2:b;
if (valid)
{
Triangle(a=a, b=B, angle=ANGLE, height=height, heights=heights,
center=center, centerXYZ=centerXYZ);
} else {
echo("Invalid Isosceles_Triangle. Must specify any 2 of b, angle and H, and if angle used angle must be less than 90");
}
}
/*
Right Angled Triangle
Create a Right Angled Triangle where the hypotenuse will be calculated.
|\
a| \
| \
----
b
a: length of side a
b: length of side b
*/
module Right_Angled_Triangle(
a, b, height=1, heights=undef,
center=undef, centerXYZ=[false, false, false])
{
Triangle(a=a, b=b, angle=90, height=height, heights=heights,
center=center, centerXYZ=centerXYZ);
}
/*
Wedge
Is same as Right Angled Triangle with 2 different heights, and rotated.
Good for creating support structures.
*/
module Wedge(a, b, w1, w2)
{
rotate([90,0,0])
Right_Angled_Triangle(a, b, heights=[w1, w2, w1], centerXYZ=[false, false, true]);
}
/*
Equilateral Triangle
Create a Equilateral Triangle.
l: Length of all sides (a, b & c)
H: Triangle size will be based on the this 2D height
When using H, l is ignored.
*/
module Equilateral_Triangle(
l=10, H=undef, height=1, heights=undef,
center=undef, centerXYZ=[true,false,false])
{
L = (H==undef)?l:H/sin(60);
Triangle(a=L,b=L,angle=60,height=height, heights=heights,
center=center, centerXYZ=centerXYZ);
}
/*
Trapezoid
Create a Basic Trapezoid (Based on Isosceles_Triangle)
d
/----\
/ | \
a / H \ c
/ | \
angle ------------ angle
b
b: Length of side b
angle: Angle at points angleAB & angleBC
H: The 2D height at which the triangle should be cut to create the trapezoid
heights: If vector of size 3 (Standard for triangles) both cd & da will be the same height, if vector have 4 values [ab,bc,cd,da] than each point can have different heights.
*/
module Trapezoid(
b, angle=60, H, height=1, heights=undef,
center=undef, centerXYZ=[true,false,false])
{
validAngle = (angle < 90);
adX = H / tan(angle);
// Calculate Heights at each point
heightAB = ((heights==undef) ? height : heights[0])/2;
heightBC = ((heights==undef) ? height : heights[1])/2;
heightCD = ((heights==undef) ? height : heights[2])/2;
heightDA = ((heights==undef) ? height : ((len(heights) > 3)?heights[3]:heights[2]))/2;
// Centers
centerX = (center || (center==undef && centerXYZ[0]))?0:b/2;
centerY = (center || (center==undef && centerXYZ[1]))?0:H/2;
centerZ = (center || (center==undef && centerXYZ[2]))?0:max(heightAB,heightBC,heightCD,heightDA);
// Points
y = H/2;
bx = b/2;
dx = (b-(adX*2))/2;
pointAB1 = [centerX-bx, centerY-y, centerZ-heightAB];
pointAB2 = [centerX-bx, centerY-y, centerZ+heightAB];
pointBC1 = [centerX+bx, centerY-y, centerZ-heightBC];
pointBC2 = [centerX+bx, centerY-y, centerZ+heightBC];
pointCD1 = [centerX+dx, centerY+y, centerZ-heightCD];
pointCD2 = [centerX+dx, centerY+y, centerZ+heightCD];
pointDA1 = [centerX-dx, centerY+y, centerZ-heightDA];
pointDA2 = [centerX-dx, centerY+y, centerZ+heightDA];
validH = (adX < b/2);
if (validAngle && validH)
{
polyhedron(
points=[ pointAB1, pointBC1, pointCD1, pointDA1,
pointAB2, pointBC2, pointCD2, pointDA2 ],
triangles=[
[0, 1, 2],
[0, 2, 3],
[4, 6, 5],
[4, 7, 6],
[0, 4, 1],
[1, 4, 5],
[1, 5, 2],
[2, 5, 6],
[2, 6, 3],
[3, 6, 7],
[3, 7, 0],
[0, 7, 4] ] );
} else {
if (!validAngle) echo("Trapezoid invalid, angle must be less than 90");
else echo("Trapezoid invalid, H is larger than triangle");
}
}

View File

@ -1,181 +0,0 @@
/*
* knurledFinishLib_v2.scad
*
* Written by aubenc @ Thingiverse
*
* This script is licensed under the Public Domain license.
*
* http://www.thingiverse.com/thing:31122
*
* Derived from knurledFinishLib.scad (also Public Domain license) available at
*
* http://www.thingiverse.com/thing:9095
*
* Usage:
*
* Drop this script somewhere where OpenSCAD can find it (your current project's
* working directory/folder or your OpenSCAD libraries directory/folder).
*
* Add the line:
*
* use <knurledFinishLib_v2.scad>
*
* in your OpenSCAD script and call either...
*
* knurled_cyl( Knurled cylinder height,
* Knurled cylinder outer diameter,
* Knurl polyhedron width,
* Knurl polyhedron height,
* Knurl polyhedron depth,
* Cylinder ends smoothed height,
* Knurled surface smoothing amount );
*
* ...or...
*
* knurl();
*
* If you use knurled_cyl() module, you need to specify the values for all and
*
* Call the module ' help(); ' for a little bit more of detail
* and/or take a look to the PDF available at http://www.thingiverse.com/thing:9095
* for a in depth descrition of the knurl properties.
*/
module knurl( k_cyl_hg = 12,
k_cyl_od = 25,
knurl_wd = 3,
knurl_hg = 4,
knurl_dp = 1.5,
e_smooth = 2,
s_smooth = 0)
{
knurled_cyl(k_cyl_hg, k_cyl_od,
knurl_wd, knurl_hg, knurl_dp,
e_smooth, s_smooth);
}
module knurled_cyl(chg, cod, cwd, csh, cdp, fsh, smt)
{
cord=(cod+cdp+cdp*smt/100)/2;
cird=cord-cdp;
cfn=round(2*cird*PI/cwd);
clf=360/cfn;
crn=ceil(chg/csh);
echo("knurled cylinder max diameter: ", 2*cord);
echo("knurled cylinder min diameter: ", 2*cird);
if( fsh < 0 )
{
union()
{
shape(fsh, cird+cdp*smt/100, cord, cfn*4, chg);
translate([0,0,-(crn*csh-chg)/2])
knurled_finish(cord, cird, clf, csh, cfn, crn);
}
}
else if ( fsh == 0 )
{
intersection()
{
cylinder(h=chg, r=cord-cdp*smt/100, $fn=2*cfn, center=false);
translate([0,0,-(crn*csh-chg)/2])
knurled_finish(cord, cird, clf, csh, cfn, crn);
}
}
else
{
intersection()
{
shape(fsh, cird, cord-cdp*smt/100, cfn*4, chg);
translate([0,0,-(crn*csh-chg)/2])
knurled_finish(cord, cird, clf, csh, cfn, crn);
}
}
}
module shape(hsh, ird, ord, fn4, hg)
{
x0= 0; x1 = hsh > 0 ? ird : ord; x2 = hsh > 0 ? ord : ird;
y0=-0.1; y1=0; y2=abs(hsh); y3=hg-abs(hsh); y4=hg; y5=hg+0.1;
if ( hsh >= 0 )
{
rotate_extrude(convexity=10, $fn=fn4)
polygon(points=[ [x0,y1],[x1,y1],[x2,y2],[x2,y3],[x1,y4],[x0,y4] ],
paths=[ [0,1,2,3,4,5] ]);
}
else
{
rotate_extrude(convexity=10, $fn=fn4)
polygon(points=[ [x0,y0],[x1,y0],[x1,y1],[x2,y2],
[x2,y3],[x1,y4],[x1,y5],[x0,y5] ],
paths=[ [0,1,2,3,4,5,6,7] ]);
}
}
module knurled_finish(ord, ird, lf, sh, fn, rn)
{
for(j=[0:rn-1])
assign(h0=sh*j, h1=sh*(j+1/2), h2=sh*(j+1))
{
for(i=[0:fn-1])
assign(lf0=lf*i, lf1=lf*(i+1/2), lf2=lf*(i+1))
{
polyhedron(
points=[
[ 0,0,h0],
[ ord*cos(lf0), ord*sin(lf0), h0],
[ ird*cos(lf1), ird*sin(lf1), h0],
[ ord*cos(lf2), ord*sin(lf2), h0],
[ ird*cos(lf0), ird*sin(lf0), h1],
[ ord*cos(lf1), ord*sin(lf1), h1],
[ ird*cos(lf2), ird*sin(lf2), h1],
[ 0,0,h2],
[ ord*cos(lf0), ord*sin(lf0), h2],
[ ird*cos(lf1), ird*sin(lf1), h2],
[ ord*cos(lf2), ord*sin(lf2), h2]
],
triangles=[
[0,1,2],[2,3,0],
[1,0,4],[4,0,7],[7,8,4],
[8,7,9],[10,9,7],
[10,7,6],[6,7,0],[3,6,0],
[2,1,4],[3,2,6],[10,6,9],[8,9,4],
[4,5,2],[2,5,6],[6,5,9],[9,5,4]
],
convexity=5);
}
}
}
module knurl_help()
{
echo();
echo(" Knurled Surface Library v2 ");
echo("");
echo(" Modules: ");
echo("");
echo(" knurled_cyl(parameters... ); - Requires a value for each an every expected parameter (see bellow) ");
echo("");
echo(" knurl(); - Call to the previous module with a set of default parameters, ");
echo(" values may be changed by adding 'parameter_name=value' i.e. knurl(s_smooth=40); ");
echo("");
echo(" Parameters, all of them in mm but the last one. ");
echo("");
echo(" k_cyl_hg - [ 12 ] ,, Height for the knurled cylinder ");
echo(" k_cyl_od - [ 25 ] ,, Cylinder's Outer Diameter before applying the knurled surfacefinishing. ");
echo(" knurl_wd - [ 3 ] ,, Knurl's Width. ");
echo(" knurl_hg - [ 4 ] ,, Knurl's Height. ");
echo(" knurl_dp - [ 1.5 ] ,, Knurl's Depth. ");
echo(" e_smooth - [ 2 ] ,, Bevel's Height at the bottom and the top of the cylinder ");
echo(" s_smooth - [ 0 ] ,, Knurl's Surface Smoothing : File donwn the top of the knurl this value, i.e. 40 will snooth it a 40%. ");
echo("");
}

View File

@ -1,372 +0,0 @@
/*
* ISO-standard metric threads, following this specification:
* http://en.wikipedia.org/wiki/ISO_metric_screw_thread
*
* Copyright 2017 Dan Kirshner - dan_kirshner@yahoo.com
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* See <http://www.gnu.org/licenses/>.
*
* Version 2.3. 2017-08-31 Default for leadin: 0 (best for internal threads).
* Version 2.2. 2017-01-01 Correction for angle; leadfac option. (Thanks to
* Andrew Allen <a2intl@gmail.com>.)
* Version 2.1. 2016-12-04 Chamfer bottom end (low-z); leadin option.
* Version 2.0. 2016-11-05 Backwards compatibility (earlier OpenSCAD) fixes.
* Version 1.9. 2016-07-03 Option: tapered.
* Version 1.8. 2016-01-08 Option: (non-standard) angle.
* Version 1.7. 2015-11-28 Larger x-increment - for small-diameters.
* Version 1.6. 2015-09-01 Options: square threads, rectangular threads.
* Version 1.5. 2015-06-12 Options: thread_size, groove.
* Version 1.4. 2014-10-17 Use "faces" instead of "triangles" for polyhedron
* Version 1.3. 2013-12-01 Correct loop over turns -- don't have early cut-off
* Version 1.2. 2012-09-09 Use discrete polyhedra rather than linear_extrude ()
* Version 1.1. 2012-09-07 Corrected to right-hand threads!
*/
// Examples.
//
// Standard M8 x 1.
// metric_thread (diameter=8, pitch=1, length=4);
// Square thread.
// metric_thread (diameter=8, pitch=1, length=4, square=true);
// Non-standard: long pitch, same thread size.
//metric_thread (diameter=8, pitch=4, length=4, thread_size=1, groove=true);
// Non-standard: 20 mm diameter, long pitch, square "trough" width 3 mm,
// depth 1 mm.
//metric_thread (diameter=20, pitch=8, length=16, square=true, thread_size=6,
// groove=true, rectangle=0.333);
// English: 1/4 x 20.
//english_thread (diameter=1/4, threads_per_inch=20, length=1);
// Tapered. Example -- pipe size 3/4" -- per:
// http://www.engineeringtoolbox.com/npt-national-pipe-taper-threads-d_750.html
// english_thread (diameter=1.05, threads_per_inch=14, length=3/4, taper=1/16);
// Thread for mounting on Rohloff hub.
//difference () {
// cylinder (r=20, h=10, $fn=100);
//
// metric_thread (diameter=34, pitch=1, length=10, internal=true, n_starts=6);
//}
// ----------------------------------------------------------------------------
function segments (diameter) = min (50, ceil (diameter*6));
// ----------------------------------------------------------------------------
// diameter - outside diameter of threads in mm. Default: 8.
// pitch - thread axial "travel" per turn in mm. Default: 1.
// length - overall axial length of thread in mm. Default: 1.
// internal - true = clearances for internal thread (e.g., a nut).
// false = clearances for external thread (e.g., a bolt).
// (Internal threads should be "cut out" from a solid using
// difference ()).
// n_starts - Number of thread starts (e.g., DNA, a "double helix," has
// n_starts=2). See wikipedia Screw_thread.
// thread_size - (non-standard) axial width of a single thread "V" - independent
// of pitch. Default: same as pitch.
// groove - (non-standard) subtract inverted "V" from cylinder (rather than
// add protruding "V" to cylinder).
// square - Square threads (per
// https://en.wikipedia.org/wiki/Square_thread_form).
// rectangle - (non-standard) "Rectangular" thread - ratio depth/(axial) width
// Default: 1 (square).
// angle - (non-standard) angle (deg) of thread side from perpendicular to
// axis (default = standard = 30 degrees).
// taper - diameter change per length (National Pipe Thread/ANSI B1.20.1
// is 1" diameter per 16" length). Taper decreases from 'diameter'
// as z increases.
// leadin - 0 (default): no chamfer; 1: chamfer (45 degree) at max-z end;
// 2: chamfer at both ends, 3: chamfer at z=0 end.
// leadfac - scale of leadin chamfer (default: 1.0 = 1/2 thread).
module metric_thread (diameter=8, pitch=1, length=1, internal=false, n_starts=1,
thread_size=-1, groove=false, square=false, rectangle=0,
angle=30, taper=0, leadin=0, leadfac=1.0)
{
// thread_size: size of thread "V" different than travel per turn (pitch).
// Default: same as pitch.
local_thread_size = thread_size == -1 ? pitch : thread_size;
local_rectangle = rectangle ? rectangle : 1;
n_segments = segments (diameter);
h = (square || rectangle) ? local_thread_size*local_rectangle/2 : local_thread_size / (2 * tan(angle));
h_fac1 = (square || rectangle) ? 0.90 : 0.625;
// External thread includes additional relief.
h_fac2 = (square || rectangle) ? 0.95 : 5.3/8;
tapered_diameter = diameter - length*taper;
difference () {
union () {
if (! groove) {
metric_thread_turns (diameter, pitch, length, internal, n_starts,
local_thread_size, groove, square, rectangle, angle,
taper);
}
difference () {
// Solid center, including Dmin truncation.
if (groove) {
cylinder (r1=diameter/2, r2=tapered_diameter/2,
h=length, $fn=n_segments);
} else if (internal) {
cylinder (r1=diameter/2 - h*h_fac1, r2=tapered_diameter/2 - h*h_fac1,
h=length, $fn=n_segments);
} else {
// External thread.
cylinder (r1=diameter/2 - h*h_fac2, r2=tapered_diameter/2 - h*h_fac2,
h=length, $fn=n_segments);
}
if (groove) {
metric_thread_turns (diameter, pitch, length, internal, n_starts,
local_thread_size, groove, square, rectangle,
angle, taper);
}
}
}
// chamfer z=0 end if leadin is 2 or 3
if (leadin == 2 || leadin == 3) {
difference () {
cylinder (r=diameter/2 + 1, h=h*h_fac1*leadfac, $fn=n_segments);
cylinder (r2=diameter/2, r1=diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
$fn=n_segments);
}
}
// chamfer z-max end if leadin is 1 or 2.
if (leadin == 1 || leadin == 2) {
translate ([0, 0, length + 0.05 - h*h_fac1*leadfac]) {
difference () {
cylinder (r=diameter/2 + 1, h=h*h_fac1*leadfac, $fn=n_segments);
cylinder (r1=tapered_diameter/2, r2=tapered_diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
$fn=n_segments);
}
}
}
}
}
// ----------------------------------------------------------------------------
// Input units in inches.
// Note: units of measure in drawing are mm!
module english_thread (diameter=0.25, threads_per_inch=20, length=1,
internal=false, n_starts=1, thread_size=-1, groove=false,
square=false, rectangle=0, angle=30, taper=0, leadin=0,
leadfac=1.0)
{
// Convert to mm.
mm_diameter = diameter*25.4;
mm_pitch = (1.0/threads_per_inch)*25.4;
mm_length = length*25.4;
echo (str ("mm_diameter: ", mm_diameter));
echo (str ("mm_pitch: ", mm_pitch));
echo (str ("mm_length: ", mm_length));
metric_thread (mm_diameter, mm_pitch, mm_length, internal, n_starts,
thread_size, groove, square, rectangle, angle, taper, leadin,
leadfac);
}
// ----------------------------------------------------------------------------
module metric_thread_turns (diameter, pitch, length, internal, n_starts,
thread_size, groove, square, rectangle, angle,
taper)
{
// Number of turns needed.
n_turns = floor (length/pitch);
intersection () {
// Start one below z = 0. Gives an extra turn at each end.
for (i=[-1*n_starts : n_turns+1]) {
translate ([0, 0, i*pitch]) {
metric_thread_turn (diameter, pitch, internal, n_starts,
thread_size, groove, square, rectangle, angle,
taper, i*pitch);
}
}
// Cut to length.
translate ([0, 0, length/2]) {
cube ([diameter*3, diameter*3, length], center=true);
}
}
}
// ----------------------------------------------------------------------------
module metric_thread_turn (diameter, pitch, internal, n_starts, thread_size,
groove, square, rectangle, angle, taper, z)
{
n_segments = segments (diameter);
fraction_circle = 1.0/n_segments;
for (i=[0 : n_segments-1]) {
rotate ([0, 0, i*360*fraction_circle]) {
translate ([0, 0, i*n_starts*pitch*fraction_circle]) {
//current_diameter = diameter - taper*(z + i*n_starts*pitch*fraction_circle);
thread_polyhedron ((diameter - taper*(z + i*n_starts*pitch*fraction_circle))/2,
pitch, internal, n_starts, thread_size, groove,
square, rectangle, angle);
}
}
}
}
// ----------------------------------------------------------------------------
module thread_polyhedron (radius, pitch, internal, n_starts, thread_size,
groove, square, rectangle, angle)
{
n_segments = segments (radius*2);
fraction_circle = 1.0/n_segments;
local_rectangle = rectangle ? rectangle : 1;
h = (square || rectangle) ? thread_size*local_rectangle/2 : thread_size / (2 * tan(angle));
outer_r = radius + (internal ? h/20 : 0); // Adds internal relief.
//echo (str ("outer_r: ", outer_r));
// A little extra on square thread -- make sure overlaps cylinder.
h_fac1 = (square || rectangle) ? 1.1 : 0.875;
inner_r = radius - h*h_fac1; // Does NOT do Dmin_truncation - do later with
// cylinder.
translate_y = groove ? outer_r + inner_r : 0;
reflect_x = groove ? 1 : 0;
// Make these just slightly bigger (keep in proportion) so polyhedra will
// overlap.
x_incr_outer = (! groove ? outer_r : inner_r) * fraction_circle * 2 * PI * 1.02;
x_incr_inner = (! groove ? inner_r : outer_r) * fraction_circle * 2 * PI * 1.02;
z_incr = n_starts * pitch * fraction_circle * 1.005;
/*
(angles x0 and x3 inner are actually 60 deg)
/\ (x2_inner, z2_inner) [2]
/ \
(x3_inner, z3_inner) / \
[3] \ \
|\ \ (x2_outer, z2_outer) [6]
| \ /
| \ /|
z |[7]\/ / (x1_outer, z1_outer) [5]
| | | /
| x | |/
| / | / (x0_outer, z0_outer) [4]
| / | / (behind: (x1_inner, z1_inner) [1]
|/ | /
y________| |/
(r) / (x0_inner, z0_inner) [0]
*/
x1_outer = outer_r * fraction_circle * 2 * PI;
z0_outer = (outer_r - inner_r) * tan(angle);
//echo (str ("z0_outer: ", z0_outer));
//polygon ([[inner_r, 0], [outer_r, z0_outer],
// [outer_r, 0.5*pitch], [inner_r, 0.5*pitch]]);
z1_outer = z0_outer + z_incr;
// Give internal square threads some clearance in the z direction, too.
bottom = internal ? 0.235 : 0.25;
top = internal ? 0.765 : 0.75;
translate ([0, translate_y, 0]) {
mirror ([reflect_x, 0, 0]) {
if (square || rectangle) {
// Rule for face ordering: look at polyhedron from outside: points must
// be in clockwise order.
polyhedron (
points = [
[-x_incr_inner/2, -inner_r, bottom*thread_size], // [0]
[x_incr_inner/2, -inner_r, bottom*thread_size + z_incr], // [1]
[x_incr_inner/2, -inner_r, top*thread_size + z_incr], // [2]
[-x_incr_inner/2, -inner_r, top*thread_size], // [3]
[-x_incr_outer/2, -outer_r, bottom*thread_size], // [4]
[x_incr_outer/2, -outer_r, bottom*thread_size + z_incr], // [5]
[x_incr_outer/2, -outer_r, top*thread_size + z_incr], // [6]
[-x_incr_outer/2, -outer_r, top*thread_size] // [7]
],
faces = [
[0, 3, 7, 4], // This-side trapezoid
[1, 5, 6, 2], // Back-side trapezoid
[0, 1, 2, 3], // Inner rectangle
[4, 7, 6, 5], // Outer rectangle
// These are not planar, so do with separate triangles.
[7, 2, 6], // Upper rectangle, bottom
[7, 3, 2], // Upper rectangle, top
[0, 5, 1], // Lower rectangle, bottom
[0, 4, 5] // Lower rectangle, top
]
);
} else {
// Rule for face ordering: look at polyhedron from outside: points must
// be in clockwise order.
polyhedron (
points = [
[-x_incr_inner/2, -inner_r, 0], // [0]
[x_incr_inner/2, -inner_r, z_incr], // [1]
[x_incr_inner/2, -inner_r, thread_size + z_incr], // [2]
[-x_incr_inner/2, -inner_r, thread_size], // [3]
[-x_incr_outer/2, -outer_r, z0_outer], // [4]
[x_incr_outer/2, -outer_r, z0_outer + z_incr], // [5]
[x_incr_outer/2, -outer_r, thread_size - z0_outer + z_incr], // [6]
[-x_incr_outer/2, -outer_r, thread_size - z0_outer] // [7]
],
faces = [
[0, 3, 7, 4], // This-side trapezoid
[1, 5, 6, 2], // Back-side trapezoid
[0, 1, 2, 3], // Inner rectangle
[4, 7, 6, 5], // Outer rectangle
// These are not planar, so do with separate triangles.
[7, 2, 6], // Upper rectangle, bottom
[7, 3, 2], // Upper rectangle, top
[0, 5, 1], // Lower rectangle, bottom
[0, 4, 5] // Lower rectangle, top
]
);
}
}
}
}

View File

Before

Width:  |  Height:  |  Size: 87 KiB

After

Width:  |  Height:  |  Size: 87 KiB

View File

@ -49,6 +49,7 @@ module laser_bed () {
} }
module rack_side () { module rack_side () {
echo("LEN", LEN);
for (i = [0 : SPOKES / 2]) { for (i = [0 : SPOKES / 2]) {
rotate([0, 0, i * ANGLE]) { rotate([0, 0, i * ANGLE]) {
difference () { difference () {
@ -69,6 +70,7 @@ module rack_side () {
} }
module stand () { module stand () {
echo("STAND", (LEN / 2) + 40);
difference () { difference () {
rounded_cube([(LEN / 2) + 40, 40, IN / 4], d = DOWEL_D, center = true); rounded_cube([(LEN / 2) + 40, 40, IN / 4], d = DOWEL_D, center = true);
translate ([-(LEN / 4), 0, 0]) cylinder(r = (THREADED_D + 4) / 2, h = 275, center = true); translate ([-(LEN / 4), 0, 0]) cylinder(r = (THREADED_D + 4) / 2, h = 275, center = true);
@ -139,6 +141,9 @@ module printer_plate () {
translate([30, 0, 0]) stand_printed_bearing(); translate([30, 0, 0]) stand_printed_bearing();
} }
//printer_plate(); //rack_side();
//stand();
//stand_base();
printer_plate();
//laser_plate(); //laser_plate();
rotate([0, 0, time]) drying_rack(); //rotate([0, 0, time]) drying_rack();