sixteenmillimeter 5e481e77b0 Addressing the issue with the JKMM99 projector functionality where frames stop prematurely. Conceivably, the proj_microswitch() function is the only place that calls proj_stop() so the issue is with the logic there. It makes little sense that this function allows for 15ms frames because of the test that requires a 450ms elapsed time before it is stopped.		2020-09-29 14:00:54 -04:00
..
components	Firmware first drafts for MONO NO AWARE optical printer	2019-02-28 17:50:39 -05:00
mcopy_JKMM99	Addressing the issue with the JKMM99 projector functionality where frames stop prematurely. Conceivably, the proj_microswitch() function is the only place that calls proj_stop() so the issue is with the logic there. It makes little sense that this function allows for 15ms frames because of the test that requires a 450ms elapsed time before it is stopped.	2020-09-29 14:00:54 -04:00
mcopy_JKMM99_intval	Re-write of the JKMM99 which replaces the relay-based camera controller with an intval-based one. This relies on the Arduino Uno in the control box to handle all of the control logic in place of an on-board Arduino Trinket Pro.	2020-09-28 23:49:57 -04:00
mcopy_cam_firmware	Mcopy camera firmware	2020-07-01 18:03:20 -04:00
mcopy_firmware	Solid state relay version of the mcopy jk firmware	2018-01-22 22:05:10 -05:00
mcopy_jk_firmware	Momentary switch delay was too long.	2018-07-03 14:25:36 -04:00
mcopy_mono_firmware_camera	Add commands for controlling a secondary projector.	2019-03-01 20:14:20 -05:00
mcopy_mono_firmware_camera_bolex	Add an alternate camera firmware for MONO NO AWARE's JK.	2019-03-01 18:01:45 -05:00
mcopy_mono_firmware_projectors	Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.	2019-04-04 18:49:07 -04:00
mcopy_mono_firmware_projectors_secondary	Secondary projector and secondary camera behaviors have been added to the main process. This is not represented in the UI... yet. All renderer code is still in flux.	2019-04-04 18:49:07 -04:00
oxberry_firmware	Filmout release 1.5.0.	2020-01-20 01:37:38 -05:00