.. |
arri_s_animation_motor.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_animation_motor_DC.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_animation_motor_DC_cap.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_animation_motor_cap.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_bellows_camera_board.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_bellows_camera_board_adapter.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_camera_bellows_board.stl
|
All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch.
|
2023-01-03 21:16:19 -05:00 |
arri_s_drive_coupling.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_drive_coupling_DC.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_drive_coupling_DC_connector.stl
|
Compile all Arri-S parts
|
2023-03-04 20:20:16 -05:00 |
arri_s_mount.stl
|
Add more files to scad.sh
|
2023-03-04 20:00:01 -05:00 |
arri_s_mount_center_fitting.stl
|
All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch.
|
2023-01-03 21:16:19 -05:00 |
bellows_board_magnetic.stl
|
Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs
|
2023-04-16 23:33:11 -04:00 |
bellows_camera_board.stl
|
Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs
|
2023-04-16 23:33:11 -04:00 |
bellows_camera_board_magnetic.stl
|
Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs
|
2023-04-16 23:33:11 -04:00 |
bellows_camera_mount.stl
|
Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs
|
2023-04-16 23:33:11 -04:00 |
bellows_lens_board.stl
|
Slight change to outer diameter.
|
2023-04-19 13:32:06 -04:00 |
bellows_lens_board_magnetic.stl
|
Add a bellows board -- to be attached to bellows and then to boards with magnets. Render all STLs
|
2023-04-16 23:33:11 -04:00 |
camera_bellows_board.stl
|
All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch.
|
2023-01-03 21:16:19 -05:00 |
capper_cap.stl
|
Re-render all STLs for capper, removing the opto endstop component (for now)
|
2022-06-28 08:38:11 -04:00 |
capper_mount_back.stl
|
Re-render all STLs for capper, removing the opto endstop component (for now)
|
2022-06-28 08:38:11 -04:00 |
capper_mount_front.stl
|
Re-render all STLs for capper, removing the opto endstop component (for now)
|
2022-06-28 08:38:11 -04:00 |
capper_opto.stl
|
All work on first draft of capper hardware
|
2022-06-12 22:26:03 -04:00 |
capper_opto_endstop_mount.stl
|
Updates to endstop mount design. Had incorrectly positioned voids for SMD chips on the endstop
|
2022-06-20 13:00:40 -04:00 |
connectors_plate.stl
|
Add a connector plate to the STL directory
|
2017-12-31 14:22:54 -05:00 |
jk_lens_assembly_bellows_board.stl
|
jk assembly and arri-s wip
|
2023-01-31 11:52:10 -05:00 |
jk_lens_assembly_camera_bellows_board.stl
|
jk assembly and arri-s wip
|
2023-01-31 11:52:10 -05:00 |
jk_projector_knob.stl
|
More mount work and start of endstop logic. Rebuilding the B&H projector unity.
|
2022-06-17 23:39:19 -04:00 |
mcopy_mono99_electronics_mount.stl
|
Add common SCAD lib. Add a script that compiles all scad files to stl (make is getting excessive). Canonicalize STL files after they're compiled.
|
2023-03-04 19:44:20 -05:00 |
motor_rod.stl
|
Work on motor rod
|
2022-07-13 09:01:25 -04:00 |
sequencer_case_bottom.stl
|
Sequencer case
|
2020-07-01 18:04:10 -04:00 |