ino/components/mcopy_light/Adafruit_Pixie.cpp

@@ -0,0 +1,176 @@
+/*!
+ *  @file Adafruit_Pixie.cpp
+ *
+ *  @mainpage Arduino library for controlling Pixie - a 3W chainable LED.
+ *
+ *  @section intro_sec Introduction
+ *
+ *  Arduino library for controlling Pixie - a 3W chainable LED
+ *
+ *  Check it out over at https://www.adafruit.com/products/2741
+ *
+ *  Adafruit invests time and resources providing this open source code,
+ *  please support Adafruit and open-source hardware by purchasing
+ *  products from Adafruit!
+ *
+ *  @section author Author
+ *
+ *  Ytai Ben-Tsvi/Limor Fried (Adafruit Industries)
+ *
+ *  @section license License
+ *
+ *  BSD (see license.txt)
+ */
+
+#include "Adafruit_Pixie.h"
+
+/*!
+ *  @brief  Instantiates a new Pixie class
+ *  @param  n
+ *          Number of Pixies in the strip
+ *  @param  *s
+ *          Pointer to hardware or software serial port
+ */
+Adafruit_Pixie::Adafruit_Pixie(uint16_t n, Stream *s)
+    : numLEDs(n), brightness(0), pixels(NULL), endTime(0), stream(s) {
+  if ((pixels = (uint8_t *)malloc(n * 3))) {
+    memset(pixels, 0, n * 3);
+  }
+}
+
+Adafruit_Pixie::~Adafruit_Pixie() {
+  if (pixels)
+    free(pixels);
+}
+
+// No begin() function; instead, just call ser.begin(115200) where 'ser'
+// is the previously-opened hardware- or software-serial port for output.
+
+/*!
+ *  @brief  Light up the LEDs!
+ */
+void Adafruit_Pixie::show() {
+  if (pixels) {
+    uint16_t n3 = numLEDs * 3;
+    while (!canShow())
+      ;                // Wait for 1ms elapsed since prior call
+    if (!brightness) { // No brightness adjust, output full blast
+      stream->write(pixels, n3);
+    } else { // Scale back brightness for every pixel R,G,B:
+      uint16_t i, b16 = (uint16_t)brightness;
+      for (i = 0; i < n3; i++) {
+        stream->write((pixels[i] * b16) >> 8);
+      }
+    }
+    endTime = micros(); // Save EOD time for latch on next call
+  }
+}
+
+/*!
+ *  @brief  Set pixel color from separate R,G,B components:
+ *  @param  n
+ *          Pixel index
+ *  @param  r
+ *          Red value (0-255)
+ *  @param  g
+ *          Green value (0-255)
+ *  @param  b
+ *          Green Blue (0-255)
+ */
+void Adafruit_Pixie::setPixelColor(uint16_t n, uint8_t r, uint8_t g,
+                                   uint8_t b) {
+  if (n < numLEDs) {
+    uint8_t *p = &pixels[n * 3];
+    p[0] = r;
+    p[1] = g;
+    p[2] = b;
+  }
+}
+
+/*!
+ *  @brief  Set pixel color from "packed" 32-bit RGB color
+ *  @param  n
+ *          Pixel index
+ *  @param  c
+ *          "packed" 32-bit RGB color
+ */
+void Adafruit_Pixie::setPixelColor(uint16_t n, uint32_t c) {
+  if (n < numLEDs) {
+    uint8_t r = (uint8_t)(c >> 16), g = (uint8_t)(c >> 8), b = (uint8_t)c,
+            *p = &pixels[n * 3];
+    p[0] = r;
+    p[1] = g;
+    p[2] = b;
+  }
+}
+
+/*!
+ *  @brief  Convert separate R,G,B into packed 32-bit RGB color.
+ *          Packed format is always RGB, regardless of LED strand color order.
+ *  @param  r
+ *          Red value (0-255)
+ *  @param  g
+ *          Green value (0-255)
+ *  @param  b
+ *          Green Blue (0-255)
+ *  @return "Packed" 32-bit RGB color
+ */
+uint32_t Adafruit_Pixie::Color(uint8_t r, uint8_t g, uint8_t b) {
+  return ((uint32_t)r << 16) | ((uint32_t)g << 8) | b;
+}
+
+/*!
+ *  @brief  Query color from previously-set pixel (returns packed 32-bit RGB
+ * value)
+ *  @param  n
+ *          Pixel index
+ *  @return "Packed" 32-bit RGB color
+ */
+uint32_t Adafruit_Pixie::getPixelColor(uint16_t n) const {
+  if (n < numLEDs) {
+    uint8_t *p = &pixels[n * 3];
+    return ((uint32_t)p[0] << 16) | ((uint32_t)p[1] << 8) | (uint32_t)p[2];
+  } else {
+    return 0; // Out of bounds, return no color.
+  }
+}
+
+/*!
+ *  @brief  Sets the brightness value
+ *  @param  b
+ *          Brightness value (0-255)
+ */
+void Adafruit_Pixie::setBrightness(uint8_t b) {
+  // Stored brightness value is different than what's passed.  This
+  // optimizes the actual scaling math later, allowing a fast 8x8-bit
+  // multiply and taking the MSB.  'brightness' is a uint8_t, adding 1
+  // here may (intentionally) roll over...so 0 = max brightness (color
+  // values are interpreted literally; no scaling), 1 = min brightness
+  // (off), 255 = just below max brightness.
+  brightness = b + 1;
+}
+
+/*!
+ *  @brief  Return the brightness value
+ *  @return The brightness value
+ */
+uint8_t Adafruit_Pixie::getBrightness() const {
+  return brightness - 1; // Reverse above operation
+}
+
+/*!
+ *  @brief  Returns the pixel colors
+ *  @return Pixel colors
+ */
+uint8_t *Adafruit_Pixie::getPixels() const { return pixels; };
+
+/*!
+ *  @brief  Returns the number of the pixels
+ *  @return The number of the pixels
+ */
+uint16_t Adafruit_Pixie::numPixels() const { return numLEDs; };
+
+/*!
+ *  @brief  Clears the pixels
+ */
+void Adafruit_Pixie::clear() { memset(pixels, 0, numLEDs * 3); }

ino/components/mcopy_light/Adafruit_Pixie.h

@@ -0,0 +1,43 @@
+/*!
+ *  @file Adafruit_Pixie.h
+ */
+
+#ifndef ADAFRUIT_PIXIE_H
+#define ADAFRUIT_PIXIE_H
+
+#include <Arduino.h>
+
+/*!
+ *  @brief  Class that stores state and functions for interacting with Adafruit
+ *          Pixie.
+ */
+class Adafruit_Pixie {
+public:
+  Adafruit_Pixie(uint16_t n, Stream *stream);
+  ~Adafruit_Pixie();
+
+  void show();
+  void setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b);
+  void setPixelColor(uint16_t n, uint32_t c);
+  void setBrightness(uint8_t b);
+  void clear();
+  uint8_t getBrightness() const;
+  uint8_t *getPixels() const;
+  uint16_t numPixels() const;
+  static uint32_t Color(uint8_t r, uint8_t g, uint8_t b);
+  uint32_t getPixelColor(uint16_t n) const;
+
+  /*!
+   *  @brief  Returns true if enough time has passed to refresh the LEDs
+   *  @return True if enough time has passed to refresh the LEDs
+   */
+  inline bool canShow() { return (micros() - endTime) > 1000L; }
+
+private:
+  const uint16_t numLEDs;      // Number of RGB LEDs in chain
+  uint8_t brightness, *pixels; // Holds LED color values (3 bytes each)
+  uint32_t endTime;            // Latch timing reference
+  Stream *stream;              // Hardware or software serial port
+};
+
+#endif // ADAFRUIT_PIXIE_H

ino/components/mcopy_light/mcopy_light.ino

@@ -37,6 +37,9 @@ void setup () {
 	pixieSerial.begin(115200); // Pixie REQUIRES this baud rate
 	light.setPixelColor(0, 0, 0, 0);
   light.show();
+  r = 90;
+  g = 90;
+  b = 90;
 }
 
 void loop () {