canon_ble #82

Merged
mattmcw merged 149 commits from canon_ble into main 2023-08-01 03:38:52 +00:00
4 changed files with 329 additions and 1 deletions
Showing only changes of commit 51114df576 - Show all commits

View File

@ -0,0 +1,65 @@
/// mcopy Serial Library
#include "McopySerial.h"
McopySerial::McopySerial (char identity) {
id = identity;
}
void McopySerial::begin () {
Serial.begin(baud);
Serial.flush();
Serial.setTimeout(serialDelay);
}
char McopySerial::loop () {
if (Serial.available()) {
cmdChar = (char) Serial.read();
_internal();
} else {
cmdChar = 'z';
}
return cmdChar;
}
void McopySerial::_internal () {
if (cmdChar == DEBUG) {
debugOn = !debugOn;
} else if (cmdChar == CONNECT) {
_connect();
} else if (cmdChar == MCOPY_IDENTIFIER) {
_identify();
}
}
void McopySerial::_connect () {
Serial.println(CONNECT);
log("connect()");
}
void McopySerial::_identify () {
Serial.println(id);
log("identify()");
}
void McopySerial::setBaud (int baudRate) {
baud = baudRate;
}
void McopySerial::setIdentity (char identity) {
id = identity;
}
void McopySerial::debug (bool state) {
debugOn = state;
}
void McopySerial::confirm (char cmd) {
Serial.println(cmd);
}
void McopySerial::log (String message) {
if (debugOn) {
Serial.println(message);
}
}

View File

@ -0,0 +1,79 @@
#ifndef MCOPY_SERIAL
#define MCOPY_SERIAL
#include "Arduino.h"
class McopySerial {
private:
const int serialDelay = 5;
volatile int baud = 57600;
volatile bool debugOn = false;
volatile char cmdChar = 'z';
volatile char id;
void _internal ();
void _connect ();
void _identify ();
public:
/* CMD FLAGS */
static const char BLACK = 'b';
static const char CAMERA = 'c';
static const char CAMERA_BACKWARD = 'f';
static const char CAMERA_CAPPER_IDENTIFIER = '8';
static const char CAMERA_CAPPER_PROJECTOR_IDENTIFIER = '9';
static const char CAMERA_CAPPER_PROJECTORS_IDENTIFIER = '0';
static const char CAMERA_FORWARD = 'e';
static const char CAMERA_IDENTIFIER = 'k';
static const char CAMERA_PROJECTORS_IDENTIFIER = '5';
static const char CAMERA_SECOND = '3';
static const char CAMERA_SECOND_BACKWARD = '2';
static const char CAMERA_SECOND_FORWARD = '1';
static const char CAMERA_SECOND_IDENTIFIER = 'y';
static const char CAMERA_TIMED = 'n';
static const char CAMERAS = '4';
static const char CAMERAS_IDENTIFIER = 'a';
static const char CAMERAS_PROJECTOR_IDENTIFIER = '6';
static const char CAMERAS_PROJECTORS_IDENTIFIER = '7';
static const char CAPPER_IDENTIFIER = 'C';
static const char CAPPER_OFF = 'B';
static const char CAPPER_ON = 'A';
static const char CONNECT = 'i';
static const char DEBUG = 'd';
static const char LIGHT = 'l';
static const char LIGHT_IDENTIFIER = 'o';
static const char MCOPY_IDENTIFIER = 'm';
static const char PROJECTOR = 'p';
static const char PROJECTOR_BACKWARD = 'h';
static const char PROJECTOR_CAMERA_IDENTIFIER = 's';
static const char PROJECTOR_CAMERA_LIGHT_IDENTIFIER = 'r';
static const char PROJECTOR_FORWARD = 'g';
static const char PROJECTOR_IDENTIFIER = 'j';
static const char PROJECTOR_LIGHT_IDENTIFIER = 'q';
static const char PROJECTOR_SECOND = 'w';
static const char PROJECTOR_SECOND_BACKWARD = 'v';
static const char PROJECTOR_SECOND_FORWARD = 'u';
static const char PROJECTOR_SECOND_IDENTIFIER = 't';
static const char PROJECTORS = 'x';
static const char PROJECTORS_IDENTIFIER = 'd';
static const char TAKEUP_BACKWARD = 'E';
static const char TAKEUP_FORWARD = 'D';
/* END CMD FLAGS */
McopySerial(char identity);
void begin();
void setBaud(int baudRate);
void setIdentity(char identity);
char loop();
void confirm(char cmd);
void debug (bool state);
void log (String message);
};
#endif

View File

@ -0,0 +1,183 @@
/*
* Sketch containing firmware for the JKMM100
* A collaboration between MONO NO AWARE and mcopy.
* Compatible with JK105 hardware.
*
* Uses an Arduino Uno compatible board and a
* custom PCB.
* Rrelay module for proj :
Wiring
CAMERA + CAMERA_DIR
Wire directly to corresponding relay pins.
Arduino 2 3 5V GND
Relay 1 2 VCC GND
Relays wired to JK Camera Controller 103/104 models
PINS FOR CAM WIRE
(# = Connector #)
Arduino # Wire In case Relay
=========================================
PIN3 1 - Yellow = Grey = IN2
5V 2 - Red = Purple = VCC
PIN2 3 - Green = White = IN1
GND 4 - Black = Black = GND
PROJECTOR + PROJECTOR_DIR
Wire to corresponding pins
Arduino 9 10 5V GND
Relay 1 2 VCC GND
For controling JK Projectors 106 models
Solid state relays connect to:
2uf run capacitory
400 Ohm Resistor (50W)
PINS FOR PROJ WIRE
#
1 -
2 -
3 -
4 -
Relay 1 corresponds to FWD
Relay 2 corresponse to BWD
*/
#include "McopySerial.h"
volatile unsigned long now;
//PROJECTOR CONSTANTS
const int PROJECTOR_MICROSWITCH = 8;
const int PROJECTOR_FWD = 9;
const int PROJECTOR_BWD = 10;
const int PROJECTOR_ON = 11;
const int PROJECTOR_MOMENT = 240;
const int PROJECTOR_FRAME = 600;
const int PROJECTOR_MICROSWITCH_CLOSED = 0;
const int PROJECTOR_MICROSWITCH_OPENED = 1;
const int PROJECTOR_HALF_TIME = 450;
//PROJECTOR VARIABLES
boolean proj_dir = true;
boolean proj_running = false;
boolean proj_primed = false;
volatile int proj_micro_state = 0;
volatile long proj_time = 0;
volatile char cmdChar = 'z';
McopySerial mc(McopySerial::PROJECTOR_IDENTIFIER);
void setup () {
mc.begin();
pins();
}
void loop () {
now = millis();
if (proj_running) {
proj_microswitch();
} else {
cmdChar = mc.loop();
cmd(cmdChar);
}
}
void pins () {
pinMode(PROJECTOR_MICROSWITCH, INPUT_PULLUP);
pinMode(PROJECTOR_FWD, OUTPUT);
pinMode(PROJECTOR_BWD, OUTPUT);
pinMode(PROJECTOR_ON, OUTPUT);
digitalWrite(PROJECTOR_FWD, LOW);
digitalWrite(PROJECTOR_BWD, LOW);
digitalWrite(PROJECTOR_ON, LOW);
}
void cmd (char val) {
if (val == McopySerial::PROJECTOR_FORWARD) {
proj_direction(true); //explicit
} else if (val == McopySerial::PROJECTOR_BACKWARD) {
proj_direction(false);
} else if (val == McopySerial::PROJECTOR) {
proj_start();
}
}
void proj_start () {
proj_time = millis();
digitalWrite(PROJECTOR_ON, HIGH);
if (proj_dir) {
digitalWrite(PROJECTOR_FWD, HIGH);
} else {
digitalWrite(PROJECTOR_BWD, HIGH);
}
proj_running = true;
}
void proj_stop () {
//stop both directions
delay(10);
digitalWrite(PROJECTOR_ON, LOW);
digitalWrite(PROJECTOR_FWD, LOW);
digitalWrite(PROJECTOR_BWD, LOW);
//evaluate total time
mc.confirm(McopySerial::PROJECTOR);
mc.log("projector()");
proj_running = false;
//Serial.println(millis() - proj_time);
}
void proj_direction (boolean state) {
proj_dir = state;
if (state) {
mc.confirm(McopySerial::PROJECTOR_FORWARD);
mc.log("proj_direction -> true");
} else {
mc.confirm(McopySerial::PROJECTOR_BACKWARD);
mc.log("proj_direction -> false");
}
}
//LOW=0=CLOSED
//HIGH=1=OPEN
void proj_microswitch () {
int val = digitalRead(PROJECTOR_MICROSWITCH);
if (!proj_primed // if not primed
&& val != proj_micro_state // AND if state changes
&& val == PROJECTOR_MICROSWITCH_OPENED // AND state changes to open
&& now - proj_time > PROJECTOR_HALF_TIME) {
//prime
mc.log("proj_primed => true");
proj_micro_state = val;
proj_primed = true;
} else if (proj_primed //if primed
&& val != proj_micro_state //AND if state changes
&& val == PROJECTOR_MICROSWITCH_CLOSED //AND state changes to open
&& now - proj_time > PROJECTOR_HALF_TIME) { //AND total elapsed time is greater than half frame time
//stop
proj_primed = false;
proj_micro_state = val; //unneeded?
proj_stop();
} else {
//delay(2); //some smothing value
}
}

View File

@ -16,4 +16,5 @@ if [ -f "$(which jq)" ]; then
rm -f "${TMP_FILE}"
fi
cp ino/lib/McopySerial/McopySerial.* ino/mcopy_cam_canon/
cp ino/lib/McopySerial/McopySerial.* ino/mcopy_cam_canon/
cp ino/lib/McopySerial/McopySerial.* ino/mcopy_JKMM100/