scad/cpc_connectors.scad

@@ -0,0 +1,73 @@
+/*
+	Amphenol CPC 9pin Connectors
+*/
+
+include <./common/common.scad>;
+
+PART="";
+
+PlugD = 11;
+SocketD = PlugD + 0.2;
+
+module cpc_9pin_plug () {
+	$fn = 200;
+	D = 17;
+	OD = 28;
+	H = 25;
+
+	difference () {
+		union () {
+			cylinder(r = OD / 2, h = H, center = true);
+			//cube([12, 48, 3], center = true);
+		}
+		//main void
+		translate([0, 0, -3]) cylinder(r = (OD / 2) - 3, h = H, center = true);
+		//connector void
+		cylinder(r = D / 2, h = H * 2, center = true);
+	}
+}
+
+module cpc_9pin_plug_sleeve () {
+	$fn = 200;
+	D = 17;
+	OD = 28;
+	H = 25;
+
+	difference () {
+		union () {
+			cylinder(r = OD / 2, h = H, center = true);
+			//cube([12, 48, 3], center = true);
+		}
+		//main void
+		translate([0, 0, -3]) cylinder(r = (OD / 2) - 3, h = H, center = true);
+		//connector void
+		cylinder(r = D / 2, h = H * 2, center = true);
+	}
+}
+
+module cpc_9pin_socket () {
+	$fn = 200;
+	D = 17;
+	OD = 28;
+	H = 25;
+
+	difference () {
+		union () {
+			cylinder(r = OD / 2, h = H, center = true);
+			//cube([12, 48, 3], center = true);
+		}
+		//main void
+		translate([0, 0, -3]) cylinder(r = (OD / 2) - 3, h = H, center = true);
+		//connector void
+		cylinder(r = D / 2, h = H * 2, center = true);
+	}
+
+}
+
+if (PART == "cpc_9pin_plug") {
+	cpc_9pin_plug();
+} else if (PART == "cpc_9pin_plug_sleeve") {
+	cpc_9pin_plug_sleeve();
+} else if (PART == "cpc_9pin_socket") {
+	cpc_9pin_socket();
+}

scad/projector_controller.scad

@@ -1,22 +1,73 @@
 include <arduino.scad>;
+include <common/common.scad>;
 
-PART="electronics_mount";
+PART="electronics_mountx";
 
-CaseX = 100;
+CaseX = 121;
-CaseY = 200;
+CaseY = 172;
-CaseZ = 40;
+CaseZ = 56;
+
+CaseInnerX = 112;
+CaseInnerY = 162;
+CaseInnerZ = 52;
 
 CaseMountsX = 90;
-CaseMountsY = 190;
+CaseMountsY = 130;
+
+CaseMountsH = 5;
+
+CaseSplitZ = 41;
+
+
+module case_mount_debug () {
+	$fn = 30;
+	translate([0, 0, -0.1]) difference () {
+		cylinder(r = R(7), h = CaseMountsH, center = true);
+		cylinder(r = R(3.25), h = CaseMountsH + 1, center = true);
+	}
+}
+
+module case_mounts_debug () {
+	Z = -CaseInnerZ/2+(CaseMountsH/2);
+	translate([CaseMountsX/2,   CaseMountsY/2, Z]) case_mount_debug();
+	translate([CaseMountsX/2,  -CaseMountsY/2, Z]) case_mount_debug();
+	translate([-CaseMountsX/2,  CaseMountsY/2, Z]) case_mount_debug();
+	translate([-CaseMountsX/2, -CaseMountsY/2, Z]) case_mount_debug();
+}
 
 module case_debug () {
-	cube([CaseX, CaseY, CaseZ], center = true);
+	difference () {
+		cube([CaseX, CaseY, CaseZ], center = true);
+		cube([CaseInnerX, CaseInnerY, CaseInnerZ], center = true);
+		translate([0, 0, CaseSplitZ]) cube([CaseX + 1, CaseY + 1, CaseZ], center = true);
+		translate([0, 150, 0]) cube([CaseX + 1, CaseY, CaseZ + 1], center = true);
+	}
+	case_mounts_debug();
+}
+
+module relay_module_debug () {
+
+}
+
+module capacitor_debug () {
+
+}
+
+module resistor_debug () {
+	
 }
 
 module electronics_mount () {
-	bumper();
+	translate([40, 78, 0]) rotate([0, 0, 180]) bumper();
+}
+
+module debug () {
+	case_debug();
+	translate([0, 0, -CaseInnerZ/2+(CaseMountsH)]) electronics_mount();
 }
 
 if (PART == "electronics_mount") {
 	electronics_mount();
+} else {
+	debug();
 }