ino/mcopy_cam_canon/.gitignore

@@ -0,0 +1 @@
+debug*

ino/mcopy_cam_canon/debug.cfg

@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-# Example OpenOCD configuration file for ESP32-WROVER-KIT board.
-#
-# For example, OpenOCD can be started for ESP32 debugging on
-#
-#   openocd -f board/esp32-wrover-kit-3.3v.cfg
-#
-
-# Source the JTAG interface configuration file
-source [find interface/ftdi/esp32_devkitj_v1.cfg]
-set ESP32_FLASH_VOLTAGE 3.3
-# Source the ESP32 configuration file
-source [find target/esp32.cfg]

ino/mcopy_cam_canon/debug_custom.json

@@ -1,19 +0,0 @@
-{
-	"name":"Arduino on ESP32",
-	"toolchainPrefix":"xtensa-esp32-elf",
-	"svdFile":"esp32.svd",
-	"request":"attach",
-	"postAttachCommands":[
-		"set remote hardware-watchpoint-limit 2",
-		"monitor reset halt",
-		"monitor gdb_sync",
-		"thb setup",
-		"c"
-	],
-	"overrideRestartCommands":[
-		"monitor reset halt",
-		"monitor gdb_sync",
-		"thb setup",
-		"c"
-	]
-}

ino/mcopy_cam_canon/mcopy_cam_canon.ino

@@ -26,14 +26,16 @@
 
 #define SHUTTTER_BTN    14
 #define FOCUS_BTN   12
-#define LED 2
+#define LED 22
 
 void blink();
 bool ledState;
 
 String name_remote = "mcopy";
 CanonBLERemote canon_ble(name_remote);
-TickTwo blinker(blink, 500, 0, MILLIS);
+TickTwo blinker(blink, 500);
+boolean connected = false;
+long last = -1;
 
 void blink(){
     digitalWrite(LED, ledState);
@@ -58,8 +60,13 @@ void setup()
     }
     while(!canon_ble.pair(10));
 
-    blinker.stop();
+    connected = true;
+    blinker.pause();
+    blinker.interval(100);
+
+    digitalWrite(LED, HIGH);
     delay(1000);
+    
     Serial.println("Camera paired");
     Serial.println(canon_ble.getPairedAddressString());
 }
@@ -67,24 +74,23 @@ void setup()
 void loop()
 {
     // Shutter
-    if (digitalRead(SHUTTTER_BTN) == LOW){
-        blinker.pause();
-        Serial.println("Shutter pressed");
+    if (digitalRead(SHUTTTER_BTN) == LOW && last + 1000 < millis()){
         digitalWrite(LED, LOW);
+        blinker.resume();
+        Serial.println("Shutter pressed");
+
         if(!canon_ble.trigger()){
             Serial.println("Trigger Failed");
         }
-        blinker.resume();
-    }
-    // Focus
-    else if (digitalRead(FOCUS_BTN) == LOW){
+    
         blinker.pause();
-        Serial.println("Focus pressed");
-        digitalWrite(LED, LOW);
-        if(!canon_ble.focus()){
-            Serial.println("Focus failed");
-        }
-        blinker.resume();
+        digitalWrite(LED, HIGH);
+        last = millis();
     }
     blinker.update();
+    if (connected && !canon_ble.isConnected()) {
+        connected = false;
+        Serial.println("Disconnected");
+        blinker.interval(500);
+    }
 }