mmcw-dev
8bb1997694
Use a settings file instead of cfg.json. Cfg.json becomes hardcoded.
2018-01-04 23:42:16 -05:00
mmcw-dev
9997df1c99
Remove unnecessary q module, am using async or promises where needed.
2018-01-04 23:41:32 -05:00
mmcw-dev
df39043100
Replace file-read-then-parse scenario with a require of the config json file
2018-01-04 23:40:55 -05:00
mmcwilliams
4791b7e59e
Add cmd buttons and styles. Add delay before registering devices when no serial devices are found.
2018-01-02 09:46:05 -05:00
mmcwilliams
15d0634896
Complete style reorg, now with cmd.less
2018-01-02 01:52:15 -05:00
mmcwilliams
0d2fe71689
Distinguish devices with an empty array if there's an error listing devices OR if there are none found.
2018-01-02 01:43:53 -05:00
mmcwilliams
f554bd9659
Re-organize LESS files
2018-01-02 01:43:11 -05:00
mmcw-dev
bfdab13ba4
Start database module
2018-01-02 01:17:39 -05:00
mmcw-dev
b0709f1200
Add additional firmware types
2018-01-02 01:17:19 -05:00
mmcw-dev
f7679e6828
Comment out CMY tab
2018-01-02 01:16:59 -05:00
mmcw-dev
c2a079d9af
Distinguish devices better and asynchronously
2018-01-02 01:16:33 -05:00
mmcw-dev
2bde6c9a8e
ES6 refactor
...
Can support multiple devices
Uses new types of mcopy firmware distinguishing characters
2018-01-02 01:15:29 -05:00
mmcw-dev
21ec669b20
Install async and update to electron 1.7 with associated deps
2018-01-02 01:14:29 -05:00
mmcw-dev
0354fd655a
Remove CMY tab and add command buttons
2018-01-02 01:14:06 -05:00
mmcw-dev
7ec1a08adf
Create a settings UI doc, needs to take appropriate features from cfg.json
2018-01-02 01:13:45 -05:00
mmcw-dev
530a6fdd4f
Install async module
2018-01-01 23:19:46 -05:00
mmcw-dev
3610d842b5
Display the current loop state below the loop counter setting
2017-12-20 17:12:45 -05:00
mmcw-dev
df4eeb9d14
Remove a second require of the electron module
2017-12-20 01:20:37 -05:00
mmcw-dev
88fe5cf9eb
Make pad borders thicker (looks good)
2017-12-20 01:20:20 -05:00
mmcw-dev
afcc05a2e7
Remove unnecessary extra declaration
2017-12-20 01:20:07 -05:00
mmcw-dev
6c8607bbc5
Begin database module
2017-12-20 01:19:51 -05:00
mmcw-dev
26e3428fa8
Got UI working again.
2017-12-19 22:54:39 -05:00
mmcwilliams
339303c0c2
Update modules, use latest electron and fix bad requires. App is up and running, but needs debugging of the frontend and a fierce refactor.
2017-12-19 22:02:08 -05:00
236908993e
Update requirements
2017-02-09 09:35:07 -05:00
76cd62449e
Remove automatic transfer reporting
2016-06-29 12:01:17 -04:00
474af9c568
Capture and generate transfer report data
2016-06-21 15:53:07 -04:00
c6fb0bfaa3
Add transfer listener to main.js
2016-06-21 15:25:46 -04:00
84a8df4a78
Make seq-ui module strict
2016-06-21 15:25:29 -04:00
7bbbf7ee7b
Restructured eventEmitter into various modules
2016-06-21 12:12:14 -04:00
cdd14b9ed5
Restructure main script
2016-06-21 11:05:44 -04:00
7e1a4be0cf
Emit an event on arduino serial events
...
To be listened to by other modules
2016-06-21 11:04:57 -04:00
c10252a9ee
capture-report library for creating a telecine method
...
The purpose of this module will be to generate a report of the
projector actions that can be translated into rendering instructions
for a telecine.
First tests will be done on a Blackmagic Pocket Cinema camera which
will record a 4000 frame sequence (100ft of 16mm). The report will
allow me to record the entire sequence of the projector advancing 4000
frames and will make a list of acceptable frames to pull out for
stitching together into a sequence. It is amazingly inefficient in
terms of disk space, but will make this setup much cheaper than one
that requires purchasing hardware to capture images to disk during
operation.
Rubber ducking: The report will watch for projector start and end times
in milliseconds, with a “start” value to be factored in later. On every
projector start and end event, when capture is active, an event with
the millisecond of the occurrence is logged to the report. At the end
of the sequence, the report will be parsed to determine the acceptable
frames to export into a new sequence. This will be determined by
finding a period between proj_end and proj_start events and dividing
that into frames and picking the central most frame.
Acceptable frames, marked by frame numbers, get put into an render list
that gets pegged to a first frame and adjusted via offset. The export
list will be fed into a command that will go through either a video
file or an image sequence and output the determined frames into an
image sequence that will be stitched together with ffmpeg/libav.
2016-06-18 20:49:39 -04:00
79d61c4878
Compilation of app.js after push to modules
...
It’s, like, 100 lines shorter!
2016-06-18 20:16:04 -04:00
7313f415bf
Move devices into module
2016-06-18 20:15:41 -04:00
70e1c1c28e
Move nav ang gui to modules
2016-06-18 20:13:33 -04:00
507aabcb07
Cam moved to cam-ui.js module
2016-06-18 20:08:01 -04:00
8b483ce2ef
Migrate proj object int lib/proj-ui.js
...
Modulize that sucker
2016-06-18 20:06:57 -04:00
38cd0ed1e4
Ignore transfer data files
2016-06-18 20:03:15 -04:00
mmcwilliams
0000beecc3
Add electron-prebuilt to install script
...
Needed when installing latest build
2016-06-10 17:57:41 -04:00
mmcwilliams
e405c7a661
Improve install script by adding globals
...
Need gulp and electron installed globally to run
2016-06-10 17:55:55 -04:00
mmcwilliams
b4fc5b9cef
Add 3200 kelvin to color swatch options
2016-06-10 12:00:18 -04:00
mmcwilliams
d9a18b5d43
Merge remote-tracking branch 'origin/master'
...
# Conflicts:
# ino/mcopy_camera_tests/mcopy_camera_tests.ino
Fixed gross conflict
2016-06-09 17:23:17 -04:00
mmcwilliams
11cdb9b514
Make mscript command line function
...
Can issue commands using GUI
2016-06-09 17:21:49 -04:00
763cb659d6
Timed exposure commands
2016-05-29 20:33:40 -04:00
mmcwilliams
5d2dcac4c4
CMYK controls almost fully functional
...
Need to better tie into swatch selection, and need to add UI to dials
themselves, but currently can display and change values with the inputs.
2016-05-18 18:05:43 -04:00
08e4738b86
Build out CMY controls for lighting
2016-05-16 10:41:24 -04:00
9532c8cd8f
Migrate UI code into libraries
2016-05-16 10:41:11 -04:00
mmcwilliams
ae2c490afd
Establish CMYK controls in markup
2016-05-13 17:28:51 -04:00
8bb89e1a62
Add device identifiers to the configuration
...
These are characters that are sent to or received from mcopy devices
(camera or projector)
2016-05-04 21:03:54 -04:00
2697d9f721
Add notifier
2016-04-22 14:34:44 -04:00
mmcw-dev
Matt