28 lines
1.8 KiB
Markdown
28 lines
1.8 KiB
Markdown
# INTVAL3
|
|
|
|
### What is this?
|
|
|
|
INTVAL3 is an open source intervalometer for the Bolex 16mm camera. The goal of the project is to create a cheap-to-make intervalometer that can be used to automate time-lapse or animation on the Bolex using mobile, web or physical controls.
|
|
|
|
This is the third incarnation of the INTVAL project, this time utilizing the [Raspberry Pi Zero W](https://www.raspberrypi.org/products/raspberry-pi-zero-w/) for Wifi and Bluetooth control. Earlier versions, the [INTVAL](https://github.com/sixteenmillimeter/INTVAL) and [INTVAL2](https://github.com/sixteenmillimeter/intval2) were Arduino-based. The original INTVAL used a solenoid (!!!) to hammer a camera release cable, while the second attempt was a proving ground for the motor-and-key hardware used in this version.
|
|
|
|
The [INTVAL2](https://github.com/sixteenmillimeter/intval2) project should be used if you prefer a simpler, physical interface approach.
|
|
|
|
### Components
|
|
|
|
* Firmware for the Raspberry Pi Zero W running on [Node.js](https://nodejs.org)
|
|
* Mobile/Web/API for controlling device, using [Cordova](https://cordova.apache.org/) + [Bleno](https://github.com/sandeepmistry/bleno), and [Restify](http://restify.com/)
|
|
* Hardware files, parts models for 3D printing, laser cutting and CNC
|
|
* PCB design for a Raspberry Pi Zero W Bonnet
|
|
* [Parts list](#parts-list)
|
|
|
|
<a name="parts-list"></a>
|
|
|
|
## PARTS
|
|
|
|
1. Raspberry Pi Zero W - [[Adafruit](https://www.adafruit.com/product/3400)] [[Sparkfun](https://www.sparkfun.com/products/14277)]
|
|
2. L298N Breakout Board - ?
|
|
3. 120RPM 12VDC Motor - ?
|
|
4. Microswitch w/ Roller - [[Adafruit](https://www.adafruit.com/product/819)]
|
|
5. L7805 5V Regulator - [[Adafruit](https://www.adafruit.com/product/2164)] [Sparkfun](https://www.sparkfun.com/products/107)]
|
|
6. (Optional) Proto Bonnet - [[Adafruit](https://www.adafruit.com/product/3203)] |