mmcw-dev
7a2b2ecdde
Add a bolt guide
2018-11-10 16:27:40 -05:00
mmcw-dev
02c3481048
Add comments to intval2_buttons.ino, which is the first 2-speed version of the script.
2018-10-17 23:24:38 -04:00
mmcwilliams
7b5eecacc8
Sequence was not occurring.
2018-10-17 12:09:26 -04:00
mmcwilliams
a4bd06f2d9
This one's pretty funny. Timed exposure sequences were operating backwards, where the timed exposure was running while the cap was over the lens. Whoops.
2018-10-17 12:09:26 -04:00
mmcw-dev
d0de8fe32f
space out electronics for intval2
2018-10-13 12:21:24 -04:00
mmcwilliams
e026268cde
Fix case
2018-10-10 18:18:18 -04:00
mmcwilliams
6eeedb06ae
Increase case height for a less crowded working area
2018-10-09 18:02:33 -04:00
mmcw-dev
eec22ceb6f
Fix intval2_button_servo for new servo, add parameters which can change the pulse width for different models
2018-09-24 19:25:54 -04:00
mmcwilliams
a28ca263dd
3x version 2 board, still need to thicken traces, comes off in transfer process and breaks.
2018-08-27 17:23:13 -04:00
mmcwilliams
6f753ca3cf
Boards for etching
2018-08-27 10:46:09 -04:00
mmcw-dev
0ee27480ec
Updated fritzing file
2018-08-21 11:07:38 -04:00
mmcw-dev
e450e86396
Servo board
2018-08-17 10:58:12 -04:00
mmcw-dev
3a4d82db21
Shield work
2018-08-17 08:07:55 -04:00
44923acf38
Add intval button servo blackout switch
2017-04-05 15:53:36 -04:00
mmcwilliams
922904a500
intval 2.2 concept
2016-09-20 11:40:16 -04:00
mmcwilliams
f45a1adf86
Ignore DS_Store
2016-09-19 11:32:39 -04:00
00df49a7c8
Added arbitrary exposure via buttons
2016-07-05 09:45:25 -04:00
ee0555cd5d
Move intval_2_buttons into its on folder
2016-07-04 23:30:21 -04:00
585e776e3e
Small refactor to intval_2_1_serial
2016-07-04 23:11:04 -04:00
08fb6353db
Add comments to code identifying command structure
2016-07-02 10:39:58 -04:00
cdc0309d65
Serial version of the INTVAL 2.1 code
2016-05-31 11:42:59 -04:00
5be6268811
Create a motor cap for the 120RPM motor
2016-05-23 13:21:31 -04:00
1e1d113f4e
Update standoffs to better attach to panel
...
Having built a number of these, attaching the standoffs is a problem.
This is an attempt to better attach them to the panel.
2016-05-17 10:19:35 -04:00
5624d4fd01
Add height to motor_key_120
...
Also adjust the bottom of the hobbled shaft negative space so that the
motor is required to put some force against the camera body.
2016-05-13 15:14:02 -04:00
d3f6d50bc7
Place motor key 120 in correct /dist folder
2016-05-13 11:59:52 -04:00
694ba5d7b5
Redesigned 120RPM motor_key
...
Needed to make it taller to have a better grip on the hobbled shaft.
This change shifts the bolt that rests against the flat end of the
shaft upwards, as well. May need to lift the bottom of the shaft
negative space for more pressure against the key.
2016-05-13 00:00:34 -04:00
08257cbadb
Only use loop delay when not running, delaying or during a sequence
2016-05-12 22:49:09 -04:00
24baf8ae4d
Remove typo in SLOW_PWM variable
2016-05-12 22:05:25 -04:00
ed075bbfa9
Sequence no longer ends with an erroneous frame
...
Moved the sequence start and stop logic into the button_end function.
This will allow the sequence to stop without firing a final frame after
the sequence is done. Also added variables to define the speed of the
motors a little more easily.
2016-05-12 22:04:39 -04:00
59a696f6aa
Remove delay() from Frame() and inter-frame delay
...
This gives the user the ability to stop sequences between exposures, or
during them.
2016-05-12 16:10:19 -04:00
291ae33595
Remove timer code, was doing nothing
...
Will restore timer for Metro version of the firmware for profiling
different motors. Doesn’t make sense here where the Trinket Pro can’t
serial out.
2016-05-12 13:48:59 -04:00
e85e542723
Start single frame when plunger released
...
as opposed to when it is first pressed. It is with great consternation
that I make this change. The original intention of the Trigger()
feature was to be instant, but having used the intervalometer on
several rolls now, I find the extra frame that this feature introduces
into sequences to be troublesome.
2016-05-11 21:05:03 -04:00
6f82eb6bf1
Make standoffs insert into laser cut panel
...
This change will improve the physical structure of the panel. The
standoffs will fit into enlarged holes in the panel so they can be
glued to it.
2016-05-09 18:23:17 -04:00
0466262a02
Move stl into dist folder
2016-04-21 15:31:48 -04:00
0d01794176
Add electronics mount for Adafruit Metro Mini
...
Printed it, it works.
2016-04-21 12:10:46 -04:00
4f6e200076
Add an altered version of the electronics mount for Arduino Metro Minis
2016-04-15 00:02:11 -04:00
5b1de86b11
Move set screw to internal position in 120 key
2016-04-09 19:41:45 -04:00
fa051804cf
Primary work on 120RPM motor mount
2016-04-04 17:51:16 -04:00
77f2fee695
wider opening for motor mount
2016-04-04 11:58:03 -04:00
c3f9ef1001
Increase resolution
2016-04-02 22:47:23 -04:00
2d044f33ff
Made changes for 120RPM motors
2016-04-02 22:46:01 -04:00
c5791a8672
Added alt motor_keys for different 1:1 shaft sizes
2016-03-29 15:00:32 -04:00
1f21d1a7d9
Add most of the photos to the docs
2016-03-29 15:00:05 -04:00
0b548bc315
Add photo of finished build
2016-03-25 13:38:16 -04:00
9b28e52d28
Improved motor key to allow hobbled shaft insertion
2016-03-25 11:37:48 -04:00
e56417c33d
Fix photo markup
2016-03-24 15:28:49 -04:00
2b09bede05
Additional documentation work
2016-03-22 18:10:21 -04:00
33b0794263
Add exploded view for construction
2016-03-22 18:03:05 -04:00
44a0934a5a
Add dxf plate
2016-03-22 16:18:13 -04:00
04ffaa273a
optimized plate layout for 150x150mm printer
2016-03-22 13:15:52 -04:00
mmcw-dev
Matt McWilliams
Matt
Matt
Matt
Matt