contact_printer/scad/ready.scad

226 lines
9.1 KiB
OpenSCAD
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//!OpenSCAD
/* preprocessor */
module tube(o = 1, i = 0, h = 1, center = false, $fn = 12) {
$fn = $fn;
union () {
difference () {
cylinder(r = o, h = h, center = center);
cylinder(r = i, h = h, center = center);
}
}
}
module rounded_cube (cube_arr = [1, 1, 1], d = 0, center = false) {
off_x = 0;
off_y = 0;
r = d/2;
union () {
cube([cube_arr[0] - d, cube_arr[1], cube_arr[2]], center = center);
cube([cube_arr[0], cube_arr[1] - d, cube_arr[2]], center = center);
translate ([1 * (cube_arr[0] / 2) - r , 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
translate ([-1 * (cube_arr[0] / 2) + r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
translate ([1 * (cube_arr[0] / 2) - r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
translate ([-1 * (cube_arr[0] / 2) + r, 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
}
}
/*rounded_cube mikowski - avoid on web for triangulation errors\
NOT READY FOR PRIMETIME
module round_cube_minkowski (c = [1, 1, 1], diameter = 1) {
minkowski() {
cube([c[0] - diameter, c[1] - diameter, diameter(c[2])], center = true);
cylinder(r = diameter(diameter), h = c[2] / 2, center = true);
}
}
*/
module c_battery () {
/* C Cell battery, 26.1 × 50 */
x = 26.1;
x_fuzz = .3;
y = 50;
y_fuzz = 2;
cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
}
module sub_c_battery () {
/* Sub C Cell battery, 22.2 × 42.9 */
x = 22.2;
x_fuzz = .3;
y = 42.9;
y_fuzz = 2;
cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
}
module hex (r = 1, h = 1, center = false) {
cylinder(r = r, h = h, center = center, $fn = 6);
}
module triangle (a = 1, b = 1, c = 1, h = 1, center = false) {
}
module cone_45 (d = 1, center = false) {
cylinder(r1 = d/2, r2 = 0, h = d, center = center);
}
module decoys (d = 10, z = 0, number = 4, cube_size = 4, debug = false) {
for (i = [0: number]) {
rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size, cube_size, cube_size], center = true);
if (debug && i == 0) {
rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size * 5, cube_size* 5, cube_size], center = true);
}
}
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Paraboloid module for OpenScad
//
// Copyright (C) 2013 Lochner, Juergen
// http://www.thingiverse.com/Ablapo/designs
//
// This program is free software. It is
// licensed under the Attribution - Creative Commons license.
// http://creativecommons.org/licenses/by/3.0/
//////////////////////////////////////////////////////////////////////////////////////////////
module paraboloid (y=10, f=5, rfa=0, fc=1, detail=44){
// y = height of paraboloid
// f = focus distance
// fc : 1 = center paraboloid in focus point(x=0, y=f); 0 = center paraboloid on top (x=0, y=0)
// rfa = radius of the focus area : 0 = point focus
// detail = $fn of cone
hi = (y+2*f)/sqrt(2); // height and radius of the cone -> alpha = 45° -> sin(45°)=1/sqrt(2)
x =2*f*sqrt(y/f); // x = half size of parabola
translate([0,0,-f*fc]) // center on focus
rotate_extrude(convexity = 10,$fn=detail ) // extrude paraboild
translate([rfa,0,0]) // translate for fokus area
difference(){
union(){ // adding square for focal area
projection(cut = true) // reduce from 3D cone to 2D parabola
translate([0,0,f*2]) rotate([45,0,0]) // rotate cone 45° and translate for cutting
translate([0,0,-hi/2])cylinder(h= hi, r1=hi, r2=0, center=true, $fn=detail); // center cone on tip
translate([-(rfa+x ),0]) square ([rfa+x , y ]); // focal area square
}
translate([-(2*rfa+x ), -1/2]) square ([rfa+x ,y +1] ); // cut of half at rotation center
}
}
//Spiral Notes
//-------------------------------------------------------------------
//Height = center to center height of the end spheres which form the spirals. Ends will need to be flattened by the user as desired. Actual height of the rendering is Height+2*baseRadius
//Radius = the maximum distance from the axis of the spiral (the z axis) to the center of the sphere(s) forming the spiral
//baseRadius = cross sectional radius of the spiral
//frequency = the number of complete revolutions about the axis made by the spiral, whole numbers will result in spirals whose tops end directly above their bases
//resolution = integer number of spheres, not to be confused with $fn. The greater the number of spheres, the smoother the spiral will be (also longer render times!). Recommended that this number be 8*frequency or greater.
//numSpirals = integer number of spirals used in the spiralMulti modules spaced evenly around the axis (3 spirals are spaced 120 degrees apart, 4 spirals: 90 degrees apart, etc.)
//Instructions
//------------------------------------------------------------------
//1. Place spiral.scad in the "libraries" folder of your openscad installation. Find the libraries folder by File -> Show Library Folder...
//2. Then create a new or open one of your existing scad files and include spiral.scad with the following code:
//use<spiral.scad>;
//3. Then call the modules in your files with code similar to the following:
//spiral(20,20,3,1,25);
//spiralCone(20,20,3,1,25);
//spiralEllipse(20,20,3,1,25);
//spiralMulti(20,20,3,1,25,3);
//spiralMultiCone(20,20,3,1,25,3);
//spiralMultiEllipse(40,60,3,1,32,3);
//-------------------------------------------------------------
//simple spiral
module spiral (height = 20, Radius = 20, baseRadius = 3, frequency = 1, resolution = 25, $fn=50) {
union(){
translate ([0,0,-(height/2)]) {
for(i=[0:resolution-2]){
hull(){
rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
}
}
}
}
}
//cone spiral
module spiralCone(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25, $fn=50) {
union(){
translate ([0,0,-(height/2)]) {
for(i=[0:resolution-2]){
hull(){
rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius-(i-1)*Radius/resolution,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius-i*Radius/resolution,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
}
}
}
}
}
//ellipse spiral
module spiralEllipse(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25, $fn=50) {
union(){
translate ([0,0,-(height/2)]) {
for(i=[0:resolution-2]){
hull(){
rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius*sqrt(1-(i/(resolution-1)*(i/(resolution-1)))),0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius*sqrt(1-((i+1)/(resolution-1)*((i+1)/(resolution-1)))),0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
}
}
}
}
}
// Multiple spirals arranged radially around the axis
module spiralMulti(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
shiftAngle=360/numSpirals;
for(total=[0:numSpirals-1]) {
union(){
translate ([0,0,-(height/2)]) {
for(i=[0:resolution-2]){
hull(){
rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
}
}
}
}
}
}
// Multiple spirals arranged radially around the axis tapering in towards the axis
module spiralMultiCone(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
shiftAngle=360/numSpirals;
for(total=[0:numSpirals-1]) {
union(){
translate ([0,0,-(height/2)]) {
for(i=[0:resolution-2]){
hull(){
rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius-(i-1)*Radius/resolution,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius-i*Radius/resolution,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
}
}
}
}
}
}
//multiple ellipse spiral
module spiralMultiEllipse(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
shiftAngle=360/numSpirals;
for(total=[0:numSpirals-1]) {
union(){
translate ([0,0,-(height/2)]) {
for(i=[0:resolution-2]){
hull(){
rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius*sqrt(1-(i/(resolution-1)*(i/(resolution-1)))),0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius*sqrt(1-((i+1)/(resolution-1)*((i+1)/(resolution-1)))),0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
}
}
}
}
}
}