Frame has been resized and new panels have been drafted. Still not perfectly parametric and the const variables are getting out of hand. Needs a refactor at the top and then throughout panel modules first, removing magic numbers. Rounded panel corners at frame corners (one per panel). Printing this draft for possible revision if needed.
This commit is contained in:
parent
12eceab361
commit
4917080517
|
|
@ -49,16 +49,16 @@ PictureTakeupMotorRotationZ = -70;
|
|||
StockTakeupMotorRotationZ = 180-70;
|
||||
|
||||
//Offsets the takeup panels by x,y
|
||||
TakeupPanelPictureX = 130;
|
||||
TakeupPanelPictureX = 127.5;
|
||||
TakeupPanelPictureY = 90;
|
||||
|
||||
TakeupPanelStockX = 130;
|
||||
TakeupPanelStockX = 127.5;
|
||||
TakeupPanelStockY = -90;
|
||||
|
||||
FeedPanelPictureX = -130;
|
||||
FeedPanelPictureX = -127.5;
|
||||
FeedPanelPictureY = 90;
|
||||
|
||||
FeedPanelStockX = -130;
|
||||
FeedPanelStockX = -127.5;
|
||||
FeedPanelStockY = -90;
|
||||
|
||||
TakeupPanelPictureOffsetX = ReelX - TakeupPanelPictureX;
|
||||
|
|
@ -67,6 +67,9 @@ TakeupPanelStockOffsetX = ReelX - TakeupPanelPictureX;
|
|||
FeedPanelPictureOffsetX = -ReelX - FeedPanelPictureX;
|
||||
FeedPanelStockOffsetX = -ReelX - FeedPanelPictureX;
|
||||
|
||||
TakeupPanelBoltsOffsetX = -17.5;
|
||||
FeedPanelBoltsOffsetX = 17.5;
|
||||
|
||||
TakeupPanelX = 145;
|
||||
TakeupPanelY = 100;
|
||||
TakeupCenterVoidD = 47;
|
||||
|
|
@ -120,23 +123,25 @@ echo("Frame 2020 Y (x4)", FrameY);
|
|||
* DEBUG MODULES
|
||||
**/
|
||||
|
||||
module daylight_spool (DEBUG = false) {
|
||||
module daylight_spool (pos = [0, 0, 0], rot = [0, 0, 0], DEBUG = false) {
|
||||
//inner starting d = 31.5 or 32
|
||||
color([[255, 0, 0, 1]]) difference () {
|
||||
cylinder(r = R(DaylightW), h = DaylightH - 0.1, center = true);
|
||||
cylinder(r = R(DaylightW) + 1, h = DaylightH - 2, center = true);
|
||||
cube([9, 9, 50], center=true);
|
||||
translate([4.5, 4.5, 0]) {
|
||||
rotate([0, 0, 45]) {
|
||||
cube([3, 3, 50], center=true);
|
||||
translate(pos) rotate(rot) {
|
||||
color([[255, 0, 0, 1]]) difference () {
|
||||
cylinder(r = R(DaylightW), h = DaylightH - 0.1, center = true);
|
||||
cylinder(r = R(DaylightW) + 1, h = DaylightH - 2, center = true);
|
||||
cube([9, 9, 50], center=true);
|
||||
translate([4.5, 4.5, 0]) {
|
||||
rotate([0, 0, 45]) {
|
||||
cube([3, 3, 50], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
difference () {
|
||||
cylinder(r = R(32), h = DaylightH - 0.2, center=true);
|
||||
cylinder(r = R(32) - 1, h = DaylightH + 1, center=true);
|
||||
translate([0, 32/2, 0]) {
|
||||
cube([1.3, 10, 18], center=true);
|
||||
difference () {
|
||||
cylinder(r = R(32), h = DaylightH - 0.2, center=true);
|
||||
cylinder(r = R(32) - 1, h = DaylightH + 1, center=true);
|
||||
translate([0, 32/2, 0]) {
|
||||
cube([1.3, 10, 18], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -144,8 +149,14 @@ module daylight_spool (DEBUG = false) {
|
|||
module four_hundred_foot_spool (pos = [0, 0, 0]) {
|
||||
W = 175;
|
||||
H = 18;
|
||||
translate(pos) {
|
||||
color() cylinder(r = R(W), h = H, center = true, $fn = 200);
|
||||
translate(pos) difference() {
|
||||
color([[255, 0, 0, 1]]) cylinder(r = R(W), h = H, center = true, $fn = 200);
|
||||
cube([9, 9, 50], center=true);
|
||||
translate([4.5, 4.5, 0]) {
|
||||
rotate([0, 0, 45]) {
|
||||
cube([3, 3, 50], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -509,6 +520,13 @@ module panel (pos = [0, 0, 0]) {
|
|||
}
|
||||
}
|
||||
|
||||
module panel_corner (pos = [0, 0, 0], rot = 0) {
|
||||
translate(pos) rotate([0, 0, rot]) difference() {
|
||||
translate([10, 10, 0]) cube([20, 20, 20], center = true);
|
||||
cylinder(r = R(20), h = 20 + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
|
||||
module takeup_panel_motor_mount_bolt_void (pos = [0, 0, 0]) {
|
||||
cap = 25;
|
||||
bolt = 10;
|
||||
|
|
@ -543,7 +561,7 @@ module takeup_panel_bearings_posts (pos = [0, 0, 0]) {
|
|||
}
|
||||
}
|
||||
|
||||
module takeup_panel_bearings_bolt_void (pos = [0, 0, 0]) {
|
||||
module takeup_panel_bearings_m3_bolt_void (pos = [0, 0, 0]) {
|
||||
cap = 10;
|
||||
bolt = 20;
|
||||
translate(pos) {
|
||||
|
|
@ -554,10 +572,10 @@ module takeup_panel_bearings_bolt_void (pos = [0, 0, 0]) {
|
|||
|
||||
module takeup_panel_bearings_bolts_voids (pos = [0, 0, 0]) {
|
||||
translate(pos) {
|
||||
rotate([0, 0, BearingRotateZ1]) takeup_panel_bearings_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ2]) takeup_panel_bearings_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ3]) takeup_panel_bearings_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ4]) takeup_panel_bearings_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ1]) takeup_panel_bearings_m3_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ2]) takeup_panel_bearings_m3_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ3]) takeup_panel_bearings_m3_bolt_void([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ4]) takeup_panel_bearings_m3_bolt_void([0, BearingY, BearingZ]);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -600,19 +618,28 @@ module takeup_panel_picture (pos = [0, 0, 0]) {
|
|||
difference() {
|
||||
union(){
|
||||
translate([12.5, 12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true);
|
||||
translate([-(TakeupPanelX/2) + 2.5, (TakeupPanelY/2) - 10, 0]) cube([OtherX, OtherY, PanelZ], center = true);
|
||||
translate([-(TakeupPanelX/2) + 2.5, 12.5, 0]) cube([OtherX, TakeupPanelY, PanelZ], center = true);
|
||||
takeup_panel_bearings_posts([TakeupPanelPictureOffsetX, 0, 4.25]);
|
||||
}
|
||||
//void for motor
|
||||
translate([TakeupPanelPictureOffsetX, 0, 0]) cylinder(r = R(TakeupCenterVoidD), h = 50, center = true, $fn = 100);
|
||||
panel_corner([(TakeupPanelX / 2) + 2.5, (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//bearings
|
||||
//takeup_panel_bearings_voids([TakeupPanelPictureOffsetX, 0, 0]);
|
||||
//takeup_panel_bearings_voids([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX, 0, 0]);
|
||||
takeup_panel_bearings_bolts_voids([TakeupPanelPictureOffsetX, 0, 5]);
|
||||
//bolts
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelPictureOffsetX, (TakeupPanelY / 2) + 2.5, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelPictureOffsetX + (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelPictureOffsetX - (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelPictureOffsetX + (TakeupPanelX / 2), 2.5 - 20, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelPictureOffsetX - (TakeupPanelX / 2), 2.5 + 20, 0]);
|
||||
//top center
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX, (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//top right
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX + (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//top left
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX - (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//bottom right
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX + (TakeupPanelX / 2), 2.5 - 20, 0]);
|
||||
//bottom left
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX - (TakeupPanelX / 2), 2.5 - 20, 0]);
|
||||
//center left
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelPictureOffsetX - (TakeupPanelX / 2), 2.5 + 20, 0]);
|
||||
|
||||
takeup_panel_motor_mount_m4_bolts_voids([TakeupPanelPictureOffsetX, 0, -8.99]);
|
||||
}
|
||||
|
|
@ -657,19 +684,28 @@ module takeup_panel_stock (pos = [0, 0, 0]) {
|
|||
difference() {
|
||||
union(){
|
||||
translate([12.5, -12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true);
|
||||
translate([-(TakeupPanelX/2) + 2.5, -(TakeupPanelY/2) + 10, 0]) cube([OtherX, OtherY, PanelZ], center = true);
|
||||
translate([-(TakeupPanelX/2) + 2.5, -12.5, 0]) cube([OtherX, TakeupPanelY, PanelZ], center = true);
|
||||
takeup_panel_bearings_posts([TakeupPanelStockOffsetX, 0, 4.25]);
|
||||
}
|
||||
//motor void
|
||||
translate([TakeupPanelStockOffsetX, 0, 0]) cylinder(r = R(TakeupCenterVoidD), h = 50, center = true, $fn = 100);
|
||||
panel_corner([(TakeupPanelX / 2) + 2.5, -(TakeupPanelY / 2) - 2.5, 0], -90);
|
||||
//bearings
|
||||
//takeup_panel_bearings_voids([TakeupPanelStockOffsetX, 0, 0]);
|
||||
takeup_panel_bearings_bolts_voids([TakeupPanelStockOffsetX, 0, 5]);
|
||||
//bolts
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX, -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX + (TakeupPanelX / 2), -2.5 + 20, 0]);
|
||||
takeup_panel_bearings_bolt_void([TakeupPanelStockOffsetX - (TakeupPanelX / 2), -2.5 - 20, 0]);
|
||||
//bottom center
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelStockOffsetX, -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//bottom right
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelStockOffsetX + (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//bottom left
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelStockOffsetX - (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//top right
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelStockOffsetX + (TakeupPanelX / 2), -2.5 + 20, 0]);
|
||||
//top left
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelStockOffsetX - (TakeupPanelX / 2), -2.5 + 20, 0]);
|
||||
//center left
|
||||
takeup_panel_bearings_m3_bolt_void([TakeupPanelBoltsOffsetX + TakeupPanelStockOffsetX - (TakeupPanelX / 2), -2.5 - 20, 0]);
|
||||
|
||||
takeup_panel_motor_mount_m4_bolts_voids([TakeupPanelStockOffsetX, 0, -8.99], [0, 0, 180]);
|
||||
}
|
||||
|
|
@ -742,20 +778,24 @@ module feed_panel_picture (pos = [0, 0, 0]) {
|
|||
difference() {
|
||||
union(){
|
||||
translate([-12.5, 12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true);
|
||||
translate([(TakeupPanelX/2) - 2.5, (TakeupPanelY/2) - 10, 0]) cube([OtherX, OtherY, PanelZ], center = true);
|
||||
translate([(TakeupPanelX/2) - 2.5, 12.5, 0]) cube([OtherX, TakeupPanelY, PanelZ], center = true);
|
||||
}
|
||||
//motor void
|
||||
translate([FeedPanelPictureOffsetX, 0, 0]) cylinder(r = R(TakeupCenterVoidD), h = 50, center = true, $fn = 100);
|
||||
panel_corner([-(TakeupPanelX / 2) - 2.5, (TakeupPanelY / 2) + 2.5, 0], 90);
|
||||
//bolts
|
||||
//top center
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX, (TakeupPanelY / 2) + 2.5, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX, (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//top right
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX + (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX + (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//top left
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX - (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX - (TakeupPanelX / 2), (TakeupPanelY / 2) + 2.5, 0]);
|
||||
//bottom left
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX - (TakeupPanelX / 2), 2.5 - 20, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX - (TakeupPanelX / 2), 2.5 - 20, 0]);
|
||||
//bottom right
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX + (TakeupPanelX / 2), 2.5 - 20, 0]);
|
||||
//center right
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX + (TakeupPanelX / 2), 2.5 + 20, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX + (TakeupPanelX / 2), 2.5 + 20, 0]);
|
||||
|
||||
takeup_panel_motor_mount_m4_bolts_voids([FeedPanelPictureOffsetX, 0, -8.99]);
|
||||
}
|
||||
|
|
@ -770,20 +810,24 @@ module feed_panel_stock (pos = [0, 0, 0]) {
|
|||
difference() {
|
||||
union(){
|
||||
translate([-12.5, -12.5, 0]) cube([TakeupPanelX, TakeupPanelY, PanelZ], center = true);
|
||||
translate([(TakeupPanelX/2) - 2.5, -(TakeupPanelY/2) + 10, 0]) cube([OtherX, OtherY, PanelZ], center = true);
|
||||
translate([(TakeupPanelX/2) - 2.5, -12.5, 0]) cube([OtherX, TakeupPanelY, PanelZ], center = true);
|
||||
}
|
||||
//motor void
|
||||
translate([FeedPanelPictureOffsetX, 0, 0]) cylinder(r = R(TakeupCenterVoidD), h = 50, center = true, $fn = 100);
|
||||
panel_corner([-(TakeupPanelX / 2) - 2.5, -(TakeupPanelY / 2) - 2.5, 0], 180);
|
||||
//bolts
|
||||
//bottom center
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX, -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX, -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//bottom right
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX + (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX + (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//bottom left
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX - (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//bottom left
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX - (TakeupPanelX / 2), -2.5 + 20, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX - (TakeupPanelX / 2), -(TakeupPanelY / 2) - 2.5, 0]);
|
||||
//top left
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX - (TakeupPanelX / 2), -2.5 + 20, 0]);
|
||||
//top right
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX + (TakeupPanelX / 2), -2.5 + 20, 0]);
|
||||
//center right
|
||||
takeup_panel_bearings_bolt_void([FeedPanelPictureOffsetX + (TakeupPanelX / 2), -2.5 - 20, 0]);
|
||||
takeup_panel_bearings_m3_bolt_void([FeedPanelBoltsOffsetX + FeedPanelPictureOffsetX + (TakeupPanelX / 2), -2.5 - 20, 0]);
|
||||
|
||||
takeup_panel_motor_mount_m4_bolts_voids([FeedPanelPictureOffsetX, 0, -8.99], [0, 0, 180]);
|
||||
}
|
||||
|
|
@ -1028,24 +1072,24 @@ module debug () {
|
|||
PanelOffsetZ = -2.5;
|
||||
BearingOffsetZ = -2.5;
|
||||
//////
|
||||
panel([0, 0, PanelOffsetZ]);
|
||||
panel([0, -10, PanelOffsetZ]);
|
||||
UseDaylight = true;
|
||||
UseAll = false;
|
||||
|
||||
translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
|
||||
sprocketed_roller_upright();
|
||||
//sprocketed_roller_upright();
|
||||
//translate([50, 0, 0]) cube([100, 100, 100], center = true);
|
||||
}
|
||||
translate([0, RollerY, 18]) rotate([180, 0, 0]) sprocketed_roller_upright_solid();
|
||||
//translate([0, RollerY, 18]) rotate([180, 0, 0]) sprocketed_roller_upright_solid();
|
||||
//centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
|
||||
//lamp
|
||||
//difference () {
|
||||
//lamp_dual([0, LampY, 0 + 1]);
|
||||
lamp_single([0, LampY, 0 + 1]);
|
||||
//lamp_single([0, LampY, 0 + 1]);
|
||||
// translate([45, LampY, 0 + 2]) cube([100, 100, 100], center = true);
|
||||
//}
|
||||
//color("green") lamp_cover([0, LampY + 15, 21]);
|
||||
color("red") lamp_bolts_voids([0, LampY + 15, (LampBoltH/2) - 1.5 - 2.5]);
|
||||
color("red") lamp_bolts_voids([0, LampY + 5, (LampBoltH/2) - 1.5 - 2.5]);
|
||||
//gates
|
||||
translate([-5.35, LampY -7.1, 11 + 1 + .1]) rotate([0, 0, 7]) color("blue") picture_gate();
|
||||
|
||||
|
|
@ -1055,19 +1099,18 @@ module debug () {
|
|||
idle_roller([ IdleRollerStockX, IdleRollerStockY, 3]);
|
||||
idle_roller([-IdleRollerStockX, IdleRollerStockY, 3]);
|
||||
|
||||
|
||||
//idle roller path
|
||||
translate([0, IdleRollerPrintY - 8, 10]) cube([200, .1, 16], center = true);
|
||||
translate([0, IdleRollerStockY + 8, 10]) cube([200, .1, 16], center = true);
|
||||
|
||||
if (UseDaylight) {
|
||||
//feed
|
||||
translate([-ReelX, ReelY, DaylightZ]) daylight_spool();
|
||||
daylight_spool([-ReelX, ReelY, DaylightZ]);
|
||||
if (UseAll) {
|
||||
translate([-ReelX, -ReelY, DaylightZ]) daylight_spool();
|
||||
daylight_spool([-ReelX, -ReelY, DaylightZ]);
|
||||
//takeup
|
||||
translate([ReelX, ReelY, DaylightZ]) daylight_spool();
|
||||
translate([ReelX, -ReelY, DaylightZ]) daylight_spool();
|
||||
daylight_spool([ReelX, ReelY, DaylightZ]);
|
||||
daylight_spool([ReelX, -ReelY, DaylightZ]);
|
||||
}
|
||||
} else {
|
||||
four_hundred_foot_spool([-ReelX, ReelY, DaylightZ]);
|
||||
|
|
@ -1142,18 +1185,7 @@ module debug () {
|
|||
//motor_controller_panel([0, -75, PanelOffsetZ]);
|
||||
}
|
||||
|
||||
module debug2 () {
|
||||
translate([30, 0, 18]) difference() {
|
||||
rotate([180, 0, 0]) sprocketed_roller_upright_solid();
|
||||
translate([0, 40, 0]) cube([80, 80, 40], center = true);
|
||||
}
|
||||
translate([0, 1, 3.2+1.4]) difference() {
|
||||
sprocketed_roller_invert_solid();
|
||||
translate([0, 40, 0]) cube([80, 80, 40], center = true);
|
||||
}
|
||||
}
|
||||
|
||||
PART = "sprocketed_roller_invert_solid";
|
||||
PART = "feed_panel_picture";
|
||||
LIBRARY = true;
|
||||
|
||||
if (PART == "panel") {
|
||||
|
|
@ -1221,6 +1253,5 @@ if (PART == "panel") {
|
|||
} else if (PART == "lamp_LEDs") {
|
||||
lamp_LEDs();
|
||||
} else {
|
||||
//debug();
|
||||
debug2();
|
||||
debug();
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue