Add a single lamp design

This commit is contained in:
Matt McWilliams 2023-05-22 10:37:11 -04:00
parent 75def51cd0
commit 0e1099d29f
1 changed files with 77 additions and 43 deletions

View File

@ -163,17 +163,19 @@ module bearing (pos = [0, 0, 0], width= 8, hole = true) {
module debug () { module debug () {
DaylightZ = 11.5; DaylightZ = 11.5;
PanelOffsetZ = -2.5; PanelOffsetZ = -2.5;
BearingOffsetZ = -2.5;
////// //////
panel([0, 0, PanelOffsetZ]); panel([0, 0, PanelOffsetZ]);
UseDaylight = true; UseDaylight = true;
translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () { /*translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase); sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase);
//translate([50, 0, 0]) cube([100, 100, 100], center = true); //translate([50, 0, 0]) cube([100, 100, 100], center = true);
} }*/
//lamp //lamp
//difference () { //difference () {
lamp_dual([0, LampY, 0 + 1]); //lamp_dual([0, LampY, 0 + 1]);
lamp_single([0, LampY, 0 + 1]);
// translate([45, LampY, 0 + 2]) cube([100, 100, 100], center = true); // translate([45, LampY, 0 + 2]) cube([100, 100, 100], center = true);
//} //}
//color("green") lamp_cover([0, LampY + 15, 21]); //color("green") lamp_cover([0, LampY + 15, 21]);
@ -187,7 +189,7 @@ module debug () {
idle_roller([ IdleRollerNegativeX, IdleRollerNegativeY, 3]); idle_roller([ IdleRollerNegativeX, IdleRollerNegativeY, 3]);
idle_roller([-IdleRollerNegativeX, IdleRollerNegativeY, 3]); idle_roller([-IdleRollerNegativeX, IdleRollerNegativeY, 3]);
//active roller //active roller
centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]); //centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
if (UseDaylight) { if (UseDaylight) {
//feed //feed
@ -231,14 +233,14 @@ module debug () {
} }
translate([-ReelX + 50, ReelY, -10]) cube([100, 100, 100], center = true); translate([-ReelX + 50, ReelY, -10]) cube([100, 100, 100], center = true);
} }
translate([ReelX, ReelY, PanelOffsetZ+1]) { translate([ReelX, ReelY, BearingOffsetZ+1]) {
rotate([0, 0, BearingRotateZ1]) color("blue") bearing([0, BearingY, BearingZ]); rotate([0, 0, BearingRotateZ1]) color("blue") bearing([0, BearingY, BearingZ]);
rotate([0, 0, BearingRotateZ2]) color("blue") bearing([0, BearingY, BearingZ]); rotate([0, 0, BearingRotateZ2]) color("blue") bearing([0, BearingY, BearingZ]);
rotate([0, 0, BearingRotateZ3]) color("blue") bearing([0, BearingY, BearingZ]); rotate([0, 0, BearingRotateZ3]) color("blue") bearing([0, BearingY, BearingZ]);
rotate([0, 0, BearingRotateZ4]) color("blue") bearing([0, BearingY, BearingZ]); rotate([0, 0, BearingRotateZ4]) color("blue") bearing([0, BearingY, BearingZ]);
} }
translate([ReelX, ReelY, PanelOffsetZ+1-5]) { translate([ReelX, ReelY, BearingOffsetZ+1-5]) {
rotate([0, 0, BearingRotateZ1]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]); rotate([0, 0, BearingRotateZ1]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
rotate([0, 0, BearingRotateZ2]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]); rotate([0, 0, BearingRotateZ2]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
rotate([0, 0, BearingRotateZ3]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]); rotate([0, 0, BearingRotateZ3]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
@ -264,7 +266,7 @@ module debug () {
//feet //feet
corner_foot([FrameX/2, (FrameY/2) + 10, -26], [0, 0, 180]); corner_foot([FrameX/2, (FrameY/2) + 10, -26], [0, 0, 180]);
motor_controller_panel([0, -75, PanelOffsetZ]); //motor_controller_panel([0, -75, PanelOffsetZ]);
} }
/** /**
@ -491,6 +493,34 @@ module lamp_dual (pos = [0, 0, 0]) {
} }
} }
module lamp_single (pos = [0, 0, 0]) {
Z = 10;
WallZ = Z;
GateZ = Z;
PostsZ = Z - 1;
translate(pos) {
intersection () {
difference () {
rounded_cube([70, 70, 2], d = 4, center = true);
translate([0, -45, 0]) cylinder(r = R(60), h = 4 + 1, center = true, $fn = 200);
lamp_bolts_voids([0, 15, -2]);
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
translate([-LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
}
translate([0, 45, 0]) cylinder(r = R(130), h = 4 + 1, center = true, $fn = 200);
}
//walls
translate([0, 15, WallZ]) difference () {
rounded_cube([70, 40, 18], d = 4, center = true);
cube([70-6, 40-6, 18 + 1], center = true);
translate([0, -20, 0]) cube([10, 40-6, 18 + 1], center = true);
}
lamp_posts([0, 15, PostsZ]);
//
picture_gate_bracket([0, -7, GateZ]);
}
}
module lamp_cover (pos = [0, 0, 0]) { module lamp_cover (pos = [0, 0, 0]) {
translate(pos) difference () { translate(pos) difference () {
union () { union () {
@ -515,43 +545,45 @@ module panel (pos = [0, 0, 0]) {
SprocketedRollerZ = -2.5; SprocketedRollerZ = -2.5;
color("green") translate (pos) difference() { color("green") translate (pos) {
translate([0, PanelYOffset, 0]) cube([PanelDimensions[0], PanelDimensions[1], PanelDimensions[2]], center = true); difference() {
translate([0, PanelYOffset, 0]) cube([PanelDimensions[0], PanelDimensions[1], PanelDimensions[2]], center = true);
//sprocketed roller
translate([0, RollerY, 0]) cylinder(r = R(15), h = PanelZ + 1, center = true, $fn = 60); //sprocketed roller
translate([0, -12.5, -4 + 2.5]) rotate([0, 0, 90]) { translate([0, RollerY, 0]) cylinder(r = R(15), h = PanelZ + 1, center = true, $fn = 60);
panel_motor_mount_void([MotorMountX, MotorMountY, 0]); translate([0, -12.5, -4 + 2.5]) rotate([0, 0, 90]) {
panel_motor_mount_void([-MotorMountX, MotorMountY, 0]); panel_motor_mount_void([MotorMountX, MotorMountY, 0]);
panel_motor_mount_void([MotorMountX, -MotorMountY, 0]); panel_motor_mount_void([-MotorMountX, MotorMountY, 0]);
panel_motor_mount_void([-MotorMountX, -MotorMountY, 0]); panel_motor_mount_void([MotorMountX, -MotorMountY, 0]);
panel_motor_mount_void([-MotorMountX, -MotorMountY, 0]);
}
//panel bolts
m3_panel_bolt_void([BoltX, -BoltY1, 3]);
m3_panel_bolt_void([-BoltX, -BoltY1, 3]);
m3_panel_bolt_void([BoltX, BoltY1, 3]);
m3_panel_bolt_void([-BoltX, BoltY1, 3]);
m3_panel_bolt_void([BoltX, BoltY2, 3]);
m3_panel_bolt_void([-BoltX, BoltY2, 3]);
//idle roller posts
idle_roller_bolt_void([ IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
idle_roller_bolt_void([ IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
//lamp
lamp_bolts_voids([0, LampY + 15, LampBoltsZ]);
//lamp wire voids
translate([0, LampY, 0]) {
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
translate([-LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
}
//voids for motor pad
translate([0, RollerY + 7.4, SprocketedRollerZ]) cube([27, 43, 6], center = true);
} }
takeup_mount_panel([0, RollerY, SprocketedRollerZ], [0, 0, 90]);
//panel bolts
m3_panel_bolt_void([BoltX, -BoltY1, 3]);
m3_panel_bolt_void([-BoltX, -BoltY1, 3]);
m3_panel_bolt_void([BoltX, BoltY1, 3]);
m3_panel_bolt_void([-BoltX, BoltY1, 3]);
m3_panel_bolt_void([BoltX, BoltY2, 3]);
m3_panel_bolt_void([-BoltX, BoltY2, 3]);
//idle roller posts
idle_roller_bolt_void([ IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
idle_roller_bolt_void([ IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
//lamp
lamp_bolts_voids([0, LampY + 15, LampBoltsZ]);
//lamp wire voids
translate([0, LampY, 0]) {
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
translate([-LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
}
//voids for motor pad
translate([0, RollerY + 7.4, SprocketedRollerZ]) cube([27, 43, 6], center = true);
} }
takeup_mount_panel([0, RollerY, SprocketedRollerZ], [0, 0, 90]);
} }
@ -927,13 +959,15 @@ module motor_controller_panel (pos = [0, 0, 0]) {
} }
} }
PART = "idle_roller_half_b"; PART = "panelx";
LIBRARY = true; LIBRARY = true;
if (PART == "panel") { if (PART == "panel") {
rotate([180, 0, 0]) panel(); rotate([180, 0, 0]) panel();
} else if (PART == "lamp_dual") { } else if (PART == "lamp_dual") {
lamp_dual(); lamp_dual();
} else if (PART == "lamp_single") {
lamp_single();
} else if (PART == "takeup_panel_picture"){ } else if (PART == "takeup_panel_picture"){
takeup_panel_picture(); takeup_panel_picture();
} else if (PART == "takeup_panel_picture_motor_mount") { } else if (PART == "takeup_panel_picture_motor_mount") {