Add a single lamp design
This commit is contained in:
parent
75def51cd0
commit
0e1099d29f
|
|
@ -163,17 +163,19 @@ module bearing (pos = [0, 0, 0], width= 8, hole = true) {
|
|||
module debug () {
|
||||
DaylightZ = 11.5;
|
||||
PanelOffsetZ = -2.5;
|
||||
BearingOffsetZ = -2.5;
|
||||
//////
|
||||
panel([0, 0, PanelOffsetZ]);
|
||||
UseDaylight = true;
|
||||
|
||||
translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
|
||||
/*translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
|
||||
sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase);
|
||||
//translate([50, 0, 0]) cube([100, 100, 100], center = true);
|
||||
}
|
||||
}*/
|
||||
//lamp
|
||||
//difference () {
|
||||
lamp_dual([0, LampY, 0 + 1]);
|
||||
//lamp_dual([0, LampY, 0 + 1]);
|
||||
lamp_single([0, LampY, 0 + 1]);
|
||||
// translate([45, LampY, 0 + 2]) cube([100, 100, 100], center = true);
|
||||
//}
|
||||
//color("green") lamp_cover([0, LampY + 15, 21]);
|
||||
|
|
@ -187,7 +189,7 @@ module debug () {
|
|||
idle_roller([ IdleRollerNegativeX, IdleRollerNegativeY, 3]);
|
||||
idle_roller([-IdleRollerNegativeX, IdleRollerNegativeY, 3]);
|
||||
//active roller
|
||||
centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
|
||||
//centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
|
||||
|
||||
if (UseDaylight) {
|
||||
//feed
|
||||
|
|
@ -231,14 +233,14 @@ module debug () {
|
|||
}
|
||||
translate([-ReelX + 50, ReelY, -10]) cube([100, 100, 100], center = true);
|
||||
}
|
||||
translate([ReelX, ReelY, PanelOffsetZ+1]) {
|
||||
translate([ReelX, ReelY, BearingOffsetZ+1]) {
|
||||
rotate([0, 0, BearingRotateZ1]) color("blue") bearing([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ2]) color("blue") bearing([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ3]) color("blue") bearing([0, BearingY, BearingZ]);
|
||||
rotate([0, 0, BearingRotateZ4]) color("blue") bearing([0, BearingY, BearingZ]);
|
||||
}
|
||||
|
||||
translate([ReelX, ReelY, PanelOffsetZ+1-5]) {
|
||||
translate([ReelX, ReelY, BearingOffsetZ+1-5]) {
|
||||
rotate([0, 0, BearingRotateZ1]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
|
||||
rotate([0, 0, BearingRotateZ2]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
|
||||
rotate([0, 0, BearingRotateZ3]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
|
||||
|
|
@ -264,7 +266,7 @@ module debug () {
|
|||
//feet
|
||||
corner_foot([FrameX/2, (FrameY/2) + 10, -26], [0, 0, 180]);
|
||||
|
||||
motor_controller_panel([0, -75, PanelOffsetZ]);
|
||||
//motor_controller_panel([0, -75, PanelOffsetZ]);
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -491,6 +493,34 @@ module lamp_dual (pos = [0, 0, 0]) {
|
|||
}
|
||||
}
|
||||
|
||||
module lamp_single (pos = [0, 0, 0]) {
|
||||
Z = 10;
|
||||
WallZ = Z;
|
||||
GateZ = Z;
|
||||
PostsZ = Z - 1;
|
||||
translate(pos) {
|
||||
intersection () {
|
||||
difference () {
|
||||
rounded_cube([70, 70, 2], d = 4, center = true);
|
||||
translate([0, -45, 0]) cylinder(r = R(60), h = 4 + 1, center = true, $fn = 200);
|
||||
lamp_bolts_voids([0, 15, -2]);
|
||||
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
translate([-LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
}
|
||||
translate([0, 45, 0]) cylinder(r = R(130), h = 4 + 1, center = true, $fn = 200);
|
||||
}
|
||||
//walls
|
||||
translate([0, 15, WallZ]) difference () {
|
||||
rounded_cube([70, 40, 18], d = 4, center = true);
|
||||
cube([70-6, 40-6, 18 + 1], center = true);
|
||||
translate([0, -20, 0]) cube([10, 40-6, 18 + 1], center = true);
|
||||
}
|
||||
lamp_posts([0, 15, PostsZ]);
|
||||
//
|
||||
picture_gate_bracket([0, -7, GateZ]);
|
||||
}
|
||||
}
|
||||
|
||||
module lamp_cover (pos = [0, 0, 0]) {
|
||||
translate(pos) difference () {
|
||||
union () {
|
||||
|
|
@ -515,43 +545,45 @@ module panel (pos = [0, 0, 0]) {
|
|||
|
||||
SprocketedRollerZ = -2.5;
|
||||
|
||||
color("green") translate (pos) difference() {
|
||||
translate([0, PanelYOffset, 0]) cube([PanelDimensions[0], PanelDimensions[1], PanelDimensions[2]], center = true);
|
||||
|
||||
//sprocketed roller
|
||||
translate([0, RollerY, 0]) cylinder(r = R(15), h = PanelZ + 1, center = true, $fn = 60);
|
||||
translate([0, -12.5, -4 + 2.5]) rotate([0, 0, 90]) {
|
||||
panel_motor_mount_void([MotorMountX, MotorMountY, 0]);
|
||||
panel_motor_mount_void([-MotorMountX, MotorMountY, 0]);
|
||||
panel_motor_mount_void([MotorMountX, -MotorMountY, 0]);
|
||||
panel_motor_mount_void([-MotorMountX, -MotorMountY, 0]);
|
||||
color("green") translate (pos) {
|
||||
difference() {
|
||||
translate([0, PanelYOffset, 0]) cube([PanelDimensions[0], PanelDimensions[1], PanelDimensions[2]], center = true);
|
||||
|
||||
//sprocketed roller
|
||||
translate([0, RollerY, 0]) cylinder(r = R(15), h = PanelZ + 1, center = true, $fn = 60);
|
||||
translate([0, -12.5, -4 + 2.5]) rotate([0, 0, 90]) {
|
||||
panel_motor_mount_void([MotorMountX, MotorMountY, 0]);
|
||||
panel_motor_mount_void([-MotorMountX, MotorMountY, 0]);
|
||||
panel_motor_mount_void([MotorMountX, -MotorMountY, 0]);
|
||||
panel_motor_mount_void([-MotorMountX, -MotorMountY, 0]);
|
||||
}
|
||||
|
||||
//panel bolts
|
||||
m3_panel_bolt_void([BoltX, -BoltY1, 3]);
|
||||
m3_panel_bolt_void([-BoltX, -BoltY1, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY1, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY1, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY2, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY2, 3]);
|
||||
|
||||
//idle roller posts
|
||||
idle_roller_bolt_void([ IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
|
||||
idle_roller_bolt_void([-IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
|
||||
idle_roller_bolt_void([ IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
|
||||
idle_roller_bolt_void([-IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
|
||||
|
||||
//lamp
|
||||
lamp_bolts_voids([0, LampY + 15, LampBoltsZ]);
|
||||
//lamp wire voids
|
||||
translate([0, LampY, 0]) {
|
||||
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
translate([-LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
}
|
||||
//voids for motor pad
|
||||
translate([0, RollerY + 7.4, SprocketedRollerZ]) cube([27, 43, 6], center = true);
|
||||
}
|
||||
|
||||
//panel bolts
|
||||
m3_panel_bolt_void([BoltX, -BoltY1, 3]);
|
||||
m3_panel_bolt_void([-BoltX, -BoltY1, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY1, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY1, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY2, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY2, 3]);
|
||||
|
||||
//idle roller posts
|
||||
idle_roller_bolt_void([ IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
|
||||
idle_roller_bolt_void([-IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
|
||||
idle_roller_bolt_void([ IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
|
||||
idle_roller_bolt_void([-IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
|
||||
|
||||
//lamp
|
||||
lamp_bolts_voids([0, LampY + 15, LampBoltsZ]);
|
||||
//lamp wire voids
|
||||
translate([0, LampY, 0]) {
|
||||
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
translate([-LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
}
|
||||
//voids for motor pad
|
||||
translate([0, RollerY + 7.4, SprocketedRollerZ]) cube([27, 43, 6], center = true);
|
||||
takeup_mount_panel([0, RollerY, SprocketedRollerZ], [0, 0, 90]);
|
||||
}
|
||||
takeup_mount_panel([0, RollerY, SprocketedRollerZ], [0, 0, 90]);
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -927,13 +959,15 @@ module motor_controller_panel (pos = [0, 0, 0]) {
|
|||
}
|
||||
}
|
||||
|
||||
PART = "idle_roller_half_b";
|
||||
PART = "panelx";
|
||||
LIBRARY = true;
|
||||
|
||||
if (PART == "panel") {
|
||||
rotate([180, 0, 0]) panel();
|
||||
} else if (PART == "lamp_dual") {
|
||||
lamp_dual();
|
||||
} else if (PART == "lamp_single") {
|
||||
lamp_single();
|
||||
} else if (PART == "takeup_panel_picture"){
|
||||
takeup_panel_picture();
|
||||
} else if (PART == "takeup_panel_picture_motor_mount") {
|
||||
|
|
|
|||
Loading…
Reference in New Issue