Rework panel to be smaller and to fit between two supports. Added voids for idle roller posts.
This commit is contained in:
parent
7a0ba199ff
commit
0a35d46777
|
|
@ -1,5 +1,5 @@
|
|||
|
||||
include <./lamp.scad>;
|
||||
//include <./lamp.scad>;
|
||||
include <./box_laser.scad>;
|
||||
include <./common/common.scad>;
|
||||
include <./common/motors.scad>;
|
||||
|
|
@ -20,8 +20,9 @@ DaylightW = 92;
|
|||
DaylightH = 18;
|
||||
|
||||
PanelX = 130;
|
||||
PanelY = 185;
|
||||
PanelY = 100;
|
||||
PanelZ = 5;
|
||||
PanelYOffset = 10;
|
||||
PanelDimensions = [PanelX, PanelY, PanelZ];
|
||||
|
||||
MotorZ = -16;
|
||||
|
|
@ -44,8 +45,13 @@ IdleRollerPrintY = 5;
|
|||
IdleRollerNegativeX = 35;
|
||||
IdleRollerNegativeY = -10;
|
||||
|
||||
echo("Frame 2020 X (x2)", FrameX);
|
||||
echo("Frame 2020 Y (x2)", FrameY + 20);
|
||||
IdleRollerBoltH = 30;
|
||||
|
||||
PictureTakeupMotorRotationZ = -70;
|
||||
StockTakeupMotorRotationZ = 180-70;
|
||||
|
||||
echo("Frame 2020 X (x2)", FrameX + 20);
|
||||
echo("Frame 2020 Y (x4)", FrameY);
|
||||
|
||||
/*
|
||||
AT = 25.4 * 0.22;
|
||||
|
|
@ -821,11 +827,14 @@ module debug () {
|
|||
//translate([50, 0, 0]) cube([100, 100, 100], center = true);
|
||||
}
|
||||
//lamp
|
||||
lamp([0, LampY, 0 + 2]);
|
||||
//color("green") lamp_cover([0, LampY + 15, 23]);
|
||||
//difference () {
|
||||
lamp([0, LampY, 0 + 1]);
|
||||
// translate([45, LampY, 0 + 2]) cube([100, 100, 100], center = true);
|
||||
//}
|
||||
color("green") lamp_cover([0, LampY + 15, 21]);
|
||||
color("red") lamp_bolts_voids([0, LampY + 15, (LampBoltH/2) - 1.5 - 2.5]);
|
||||
//gates
|
||||
translate([-5.35, LampY -7, 11 + 1 + .1]) rotate([0, 0, 7]) color("blue") picture_gate();
|
||||
translate([-5.35, LampY -7.1, 11 + 1 + .1]) rotate([0, 0, 7]) color("blue") picture_gate();
|
||||
|
||||
//idle rollers
|
||||
idle_roller([ IdleRollerPrintX, IdleRollerPrintY, 3]);
|
||||
|
|
@ -833,23 +842,28 @@ module debug () {
|
|||
idle_roller([ IdleRollerNegativeX, IdleRollerNegativeY, 3]);
|
||||
idle_roller([-IdleRollerNegativeX, IdleRollerNegativeY, 3]);
|
||||
//active roller
|
||||
//centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
|
||||
centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
|
||||
//feed
|
||||
translate([-100, 50, DaylightZ]) daylight_spool();
|
||||
translate([-100, -50, DaylightZ]) daylight_spool();
|
||||
//translate([-100, 50, DaylightZ]) daylight_spool();
|
||||
//translate([-100, -50, DaylightZ]) daylight_spool();
|
||||
//takeup
|
||||
translate([100, 50, DaylightZ]) daylight_spool();
|
||||
translate([100, -50, DaylightZ]) daylight_spool();
|
||||
centered_geared_motor([100, 50, MotorZ], [180, 0, 180]);
|
||||
centered_geared_motor([100, -50, MotorZ], [180, 0, 180]);
|
||||
//translate([100, 50, DaylightZ]) daylight_spool();
|
||||
//translate([100, -50, DaylightZ]) daylight_spool();
|
||||
centered_geared_motor([100, 50, MotorZ], [180, 0, PictureTakeupMotorRotationZ]);
|
||||
centered_geared_motor([100, -50, MotorZ], [180, 0, StockTakeupMotorRotationZ]);
|
||||
|
||||
//translate([0, 0, DaylightZ]) color("red", 0.25) cube([250, 100, 16], center = true);
|
||||
|
||||
//2020 frame
|
||||
//top/bottom
|
||||
translate([0, (FrameY/2) + 10, FrameZ]) rotate([0, 90, 0]) 2020_tslot(FrameX + 20);
|
||||
translate([0, -(FrameY/2) - 10, FrameZ]) rotate([0, 90, 0]) 2020_tslot(FrameX + 20);
|
||||
//far sides
|
||||
translate([FrameX/2, 0, FrameZ]) rotate([90, 0, 0]) 2020_tslot(FrameY);
|
||||
translate([-FrameX/2, 0, FrameZ]) rotate([90, 0, 0]) 2020_tslot(FrameY);
|
||||
//inner rails
|
||||
translate([(PanelX/2) - 10, 0, FrameZ]) rotate([90, 0, 0]) 2020_tslot(FrameY);
|
||||
translate([-(PanelX/2) + 10, 0, FrameZ]) rotate([90, 0, 0]) 2020_tslot(FrameY);
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -899,6 +913,13 @@ module lamp_bolt_void (pos = [0, 0, 0], H = LampBoltH) {
|
|||
}
|
||||
}
|
||||
|
||||
module idle_roller_bolt_void (pos = [0, 0, 0], H = IdleRollerBoltH) {
|
||||
translate(pos) {
|
||||
cylinder(r = R(4.25), h = H, center = true);
|
||||
translate([0, 0, -H/2]) m4_nut();
|
||||
}
|
||||
}
|
||||
|
||||
module lamp_bolts_voids (pos = [0, 0, 0], H = 10) {
|
||||
X = LampBoltX/2;
|
||||
Y = LampBoltY/2;
|
||||
|
|
@ -945,8 +966,9 @@ module lamp_gate_bracket (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
|||
}
|
||||
|
||||
module picture_gate_bracket (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
||||
translate(pos) rotate(rot) {
|
||||
translate(pos) rotate(rot) difference() {
|
||||
lamp_gate_bracket();
|
||||
translate([0, 0, 0]) cube([4, 20, 17], center = true);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -966,9 +988,12 @@ module sound_gate_bracket (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
|||
module gate_blank () {
|
||||
X = LampGateX;
|
||||
//front
|
||||
translate([0, -6, 0]) cube([X-7.1, 1.4, 20], center = true);
|
||||
//backing
|
||||
translate([0, -5.1, -0.5]) cube([X-4.1, 1.4, 16.8], center = true);
|
||||
translate([0, -6.25, 0]) cube([X-7.2, 1.2, 19.25], center = true);
|
||||
//middle
|
||||
translate([0, -5.1, -0.5]) cube([X-4.2, 1.4, 19], center = true);
|
||||
|
||||
//top
|
||||
translate([0, -5.9, 9]) cube([X-4.2, 3, 2], center = true);
|
||||
}
|
||||
//standard, super, full, sound
|
||||
module picture_gate (pos = [0, 0, 0], rot = [0, 0, 0], Type = "full", Width = 2) {
|
||||
|
|
@ -979,9 +1004,9 @@ module picture_gate (pos = [0, 0, 0], rot = [0, 0, 0], Type = "full", Width = 2)
|
|||
gate_blank();
|
||||
}
|
||||
if (Type == "standard") {
|
||||
translate([0, -6, -0.7]) cube([Width, 3, 16mmFilmStandard], center = true);
|
||||
translate([0, -6, -0.7]) cube([Width, 10, 16mmFilmStandard], center = true);
|
||||
} else if (Type == "full") {
|
||||
translate([0, -6, -1.1]) cube([Width, 3, 16mmFilmFull], center = true);
|
||||
translate([0, -6, -1.1]) cube([Width, 10, 16mmFilmFull], center = true);
|
||||
} else if (Type == "super") {
|
||||
|
||||
}
|
||||
|
|
@ -990,10 +1015,14 @@ module picture_gate (pos = [0, 0, 0], rot = [0, 0, 0], Type = "full", Width = 2)
|
|||
}
|
||||
|
||||
module lamp (pos = [0, 0, 0]) {
|
||||
Z = 10;
|
||||
WallZ = Z;
|
||||
GateZ = Z;
|
||||
PostsZ = Z - 1;
|
||||
translate(pos) {
|
||||
intersection () {
|
||||
difference () {
|
||||
rounded_cube([70, 70, 4], d = 4, center = true);
|
||||
rounded_cube([70, 70, 2], d = 4, center = true);
|
||||
translate([0, -45, 0]) cylinder(r = R(60), h = 4 + 1, center = true, $fn = 200);
|
||||
lamp_bolts_voids([0, 15, -2]);
|
||||
translate([LampWireX, LampWireY, 0]) cylinder(r = R(10), h = 10, center = true);
|
||||
|
|
@ -1002,17 +1031,17 @@ module lamp (pos = [0, 0, 0]) {
|
|||
translate([0, 45, 0]) cylinder(r = R(130), h = 4 + 1, center = true, $fn = 200);
|
||||
}
|
||||
//walls
|
||||
translate([0, 15, 11]) difference () {
|
||||
translate([0, 15, WallZ]) difference () {
|
||||
rounded_cube([70, 40, 18], d = 4, center = true);
|
||||
cube([70-6, 40-6, 18 + 1], center = true);
|
||||
translate([0, -20, 0]) cube([20, 40-6, 18 + 1], center = true);
|
||||
}
|
||||
lamp_posts([0, 15, 10]);
|
||||
lamp_posts([0, 15, PostsZ]);
|
||||
//sound
|
||||
difference () {
|
||||
union () {
|
||||
sound_gate_bracket([5.35, -7, 11], [0, 0, -7]);
|
||||
picture_gate_bracket([-5.35, -7, 11], [0, 0, 7]);
|
||||
sound_gate_bracket([5.35, -7, GateZ], [0, 0, -7]);
|
||||
picture_gate_bracket([-5.35, -7, GateZ], [0, 0, 7]);
|
||||
}
|
||||
translate([0, -53.5, 11]) cylinder(r = R(80), h = 18.01, center = true, $fn = 200);
|
||||
}
|
||||
|
|
@ -1036,12 +1065,18 @@ module lamp_cover (pos = [0, 0, 0]) {
|
|||
}
|
||||
|
||||
module panel (pos = [0, 0, 0]) {
|
||||
BoltY = (PanelY-10)/2;
|
||||
BoltX = (PanelX-30)/2;
|
||||
BoltX = (PanelX-10)/2;
|
||||
BoltY2 = (PanelY)/2;
|
||||
|
||||
BoltY1 = 30;
|
||||
|
||||
MotorMountX = (GearedMotorMountX + 0.1) / 2;
|
||||
MotorMountY = (GearedMotorMountY + 0.1) / 2;
|
||||
|
||||
SprocketedRollerZ = -5;
|
||||
|
||||
color("green") translate (pos) difference() {
|
||||
cube(PanelDimensions, center = true);
|
||||
translate([0, PanelYOffset, 0]) cube(PanelDimensions, center = true);
|
||||
|
||||
//sprocketed roller
|
||||
translate([0, RollerY, 0]) cylinder(r = R(15), h = PanelZ + 1, center = true, $fn = 60);
|
||||
|
|
@ -1053,12 +1088,18 @@ module panel (pos = [0, 0, 0]) {
|
|||
}
|
||||
|
||||
//panel bolts
|
||||
m3_panel_bolt_void([0, BoltY, 3]);
|
||||
m3_panel_bolt_void([0, -BoltY, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY, 3]);
|
||||
m3_panel_bolt_void([BoltX, -BoltY, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY, 3]);
|
||||
m3_panel_bolt_void([-BoltX, -BoltY, 3]);
|
||||
m3_panel_bolt_void([BoltX, -BoltY1, 3]);
|
||||
m3_panel_bolt_void([-BoltX, -BoltY1, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY1, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY1, 3]);
|
||||
m3_panel_bolt_void([BoltX, BoltY2, 3]);
|
||||
m3_panel_bolt_void([-BoltX, BoltY2, 3]);
|
||||
|
||||
//idle roller posts
|
||||
idle_roller_bolt_void([ IdleRollerPrintX, IdleRollerPrintY, 3]);
|
||||
idle_roller_bolt_void([-IdleRollerPrintX, IdleRollerPrintY, 3]);
|
||||
idle_roller_bolt_void([ IdleRollerNegativeX, IdleRollerNegativeY, 3]);
|
||||
idle_roller_bolt_void([-IdleRollerNegativeX, IdleRollerNegativeY, 3]);
|
||||
|
||||
//lamp
|
||||
lamp_bolts_voids([0, LampY + 15, (LampBoltH/2) - 1.5]);
|
||||
|
|
@ -1069,16 +1110,18 @@ module panel (pos = [0, 0, 0]) {
|
|||
}
|
||||
|
||||
}
|
||||
takeup_mount_panel([0, RollerY, -7], [0, 0, 90]);
|
||||
takeup_mount_panel([0, RollerY, SprocketedRollerZ], [0, 0, 90]);
|
||||
}
|
||||
|
||||
PART = "lamp";
|
||||
PART = "panel";
|
||||
LIBRARY = true;
|
||||
|
||||
if (PART == "panel") {
|
||||
panel();
|
||||
rotate([180, 0, 0]) panel();
|
||||
} else if (PART == "lamp") {
|
||||
lamp();
|
||||
} else if (PART == "picture_gate") {
|
||||
rotate([-90, 0, 0]) picture_gate(Type = "standard");
|
||||
} else if (PART == "sprocketed_roller_reinforced") {
|
||||
sprocketed_roller(sprockets = 18, bevel = false, model = "gearbox_motor", reinforced = true, bolts = true);
|
||||
} else if (PART == "2020_tslot_insert") {
|
||||
|
|
|
|||
Loading…
Reference in New Issue