V3 ready to render. TODO: fix spiral triangular voids. Need to fit inner spoke area tighter.
This commit is contained in:
parent
5d17925f9e
commit
fc62e76a4e
|
|
@ -1,4 +1,252 @@
|
|||
//V3
|
||||
|
||||
include <../libraries/gnal_v3.scad>;
|
||||
|
||||
$fn = 200;
|
||||
spiral(60, 45.55, 2.075, $fn);
|
||||
SPOKE_COUNT = 24;
|
||||
PART="";
|
||||
|
||||
module gnal_100ft_spiral (spiral_count = 60, od = 298.75) {
|
||||
outer_d = 299;
|
||||
outer_d_inside = outer_d - 6;
|
||||
outer_h = 7.5;
|
||||
|
||||
spoke_len = 123;
|
||||
spoke_w = 3;
|
||||
spoke_h = 4.2 + 3;
|
||||
|
||||
spoke_2_len = 85;
|
||||
|
||||
spoke_cross_1_d = 63;
|
||||
spoke_cross_1_w = 18;
|
||||
|
||||
spoke_cross_2_d = 108;
|
||||
spoke_cross_2_w = 15;
|
||||
|
||||
spoke_3_len = 39;
|
||||
spoke_3_w = 2;
|
||||
|
||||
translate([0, 0, -3.6]) difference () {
|
||||
cylinder(r = outer_d / 2, h = spoke_h, center = true, $fn = 500);
|
||||
cylinder(r = outer_d_inside / 2, h = outer_h + 1, center = true, $fn = 500);
|
||||
}
|
||||
|
||||
difference () {
|
||||
gnal_spiral_core();
|
||||
//rounded spoke voids
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([0, 26.75, 0]) {
|
||||
cylinder(r = 2, h = 20, center = true, $fn = 40);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//main spokes
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, i * (360 / SPOKE_COUNT)]) {
|
||||
translate([(spoke_len / 2) + (48 / 2), 0, -3.6]) {
|
||||
cube([spoke_len, spoke_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
//secondary spokes
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([(outer_d / 2) - (spoke_2_len / 2) - 2, 0, -3.6]) {
|
||||
cube([spoke_2_len, spoke_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
//spoke cross bars
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([63, 0, -3.6]) {
|
||||
rotate([0, 0, 20]) {
|
||||
cube([ spoke_w, 18, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//second spokes
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([(outer_d / 2) - (spoke_2_len / 2) - 2, 0, -3.6]) {
|
||||
cube([spoke_2_len, spoke_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//second spoke cross pieces
|
||||
for (i = [0 : SPOKE_COUNT * 2]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / (SPOKE_COUNT * 2))]) {
|
||||
translate([spoke_cross_2_d, 0, -3.6]) {
|
||||
rotate([0, 0, -20]) {
|
||||
cube([ spoke_w, spoke_cross_2_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//third spokes
|
||||
for (i = [0 : SPOKE_COUNT * 2]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / (SPOKE_COUNT * 2))]) {
|
||||
translate([(outer_d / 2) - (spoke_3_len / 2) - 2, 0, -3.6]) {
|
||||
cube([spoke_3_len, spoke_3_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
translate([0, 0, -.1]) {
|
||||
rotate([0, 0, -90]) {
|
||||
difference () {
|
||||
film_guide(spiral_count);
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT) ]) {
|
||||
translate([(83 / 4) + (48 / 2), 0, -3.6]) triangle_void();
|
||||
}
|
||||
}
|
||||
for (i = [0 : SPOKE_COUNT * 2]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / (SPOKE_COUNT * 2)) ]) {
|
||||
translate([(258 / 2) - (spoke_2_len / 2) + 1 , 0, -3.6]) triangle_void_2();
|
||||
}
|
||||
}
|
||||
for (i = [0 : SPOKE_COUNT * 4]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / (SPOKE_COUNT * 4)) ]) {
|
||||
if (i % 2 == 0) {
|
||||
translate([(outer_d / 2) - (spoke_3_len / 2) + 1 , 0.3, -3.6]) triangle_void_3();
|
||||
} else {
|
||||
translate([(outer_d / 2) - (spoke_3_len / 2) + 1, -0.3, -3.6]) triangle_void_3();
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module gnal_100ft_top () {
|
||||
H = 5;
|
||||
center_d = 53;
|
||||
spoke_w = 4.5;
|
||||
spokes = 12;
|
||||
outer_d = 299;
|
||||
inner_d = 150;
|
||||
inner_d_2 = 215;
|
||||
void_d = 22.5;
|
||||
hole_d = 3.5;
|
||||
hole_spacing = 37;
|
||||
core_d = 29.5;
|
||||
core_bottom_d = 26.2;
|
||||
|
||||
difference () {
|
||||
union () {
|
||||
cylinder(r = center_d / 2, h = H, center = true, $fn = 100);
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, i * (360 / spokes)]) translate([0, outer_d / 4, 0]) cube([spoke_w, (outer_d / 2) - 1, H], center = true);
|
||||
}
|
||||
//outer spokes
|
||||
for (i = [0 : spokes * 2]) {
|
||||
rotate([0, 0, i * (360 / (spokes * 2))]) translate([0, (outer_d / 2) - 25, 0]) cube([spoke_w, (outer_d / 2) - (inner_d_2 / 2) , H], center = true);
|
||||
}
|
||||
}
|
||||
//void
|
||||
cylinder(r = void_d / 2, h = H + 1, center = true, $fn = 100);
|
||||
//speed holes
|
||||
for (i = [0 : 3]) {
|
||||
rotate([0, 0, (i * 90) + 45]) translate([0, hole_spacing / 2, 0]) cylinder(r = hole_d / 2, h = H + 1, center = true);
|
||||
}
|
||||
//rounding of center cylinder
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([-2.75, 26.5, 0]) cylinder(r = 2, h = H+1, center = true, $fn = 40);
|
||||
rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([2.75, 26.5, 0]) cylinder(r = 2, h = H+1, center = true, $fn = 40);
|
||||
rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([0, 26.5, 0]) cube([5, 4, H + 1], center = true);
|
||||
}
|
||||
}
|
||||
difference () {
|
||||
cylinder(r = (center_d / 2) - 1.8, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (hole_spacing / 2) + 2, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
//outer ring
|
||||
difference () {
|
||||
cylinder(r = outer_d / 2, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (outer_d / 2) - 5, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
//inner ring
|
||||
difference () {
|
||||
cylinder(r = inner_d / 2, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (inner_d / 2) - 5, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
//second inner ring
|
||||
difference () {
|
||||
cylinder(r = inner_d_2 / 2, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (inner_d_2 / 2) - 5, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
|
||||
//rounded cross connectors
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, i * (360 / spokes)]) translate([0, (inner_d / 2) - (spoke_w / 2), 0]) difference() {
|
||||
cylinder(r = 6.5, h = H, center = true);
|
||||
translate([6.25, 6, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.25, 6, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.1, -7, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([6.1, -7, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
difference () {
|
||||
union () {
|
||||
translate([0, 0, 3.75 + 1]) cylinder(r = core_d / 2, h = H, center = true, $fn = 60);
|
||||
translate([0, 0, 3.75 + 1 + 3.2]) cylinder(r = core_bottom_d / 2, h = H, center = true, $fn = 60);
|
||||
}
|
||||
cylinder(r = void_d / 2, h = H * 5 , center = true, $fn = 100);
|
||||
translate([0, 0, 4 + 1 + 2.25]) spacer_ridges();
|
||||
}
|
||||
//rounded second ring connectors
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, i * (360 / spokes)]) translate([0, 205 / 2, 0]) difference () {
|
||||
translate([0, 2, 0]) cube([13, 12, H], center = true);
|
||||
translate([6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([6.2, 8.75, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.2, 8.75, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
//second ring connectors
|
||||
for (i = [0 : spokes * 2]) {
|
||||
rotate([0, 0, i * (360 / (spokes * 2))]) translate([0, 205 / 2, 0]) difference () {
|
||||
translate([0, 4, 0]) cube([13, 8, H], center = true);
|
||||
translate([6.2, 8.75, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.2, 8.75, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
|
||||
for (i = [0 : spokes * 2]) {
|
||||
rotate([0, 0, i * (360 / (spokes * 2))]) translate([0, 289 / 2, 0]) difference () {
|
||||
translate([0, 0, 0]) cube([13, 9, H], center = true);
|
||||
translate([6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
module film_guide (rotations = 60, id = 45.55, spacing = 2.075) {
|
||||
$fn = 200;
|
||||
spiral(rotations, id, spacing, $fn);
|
||||
}
|
||||
|
||||
if (PART == "spiral") {
|
||||
gnal_100ft_spiral();
|
||||
} else if (PART == "top") {
|
||||
gnal_100ft_top();
|
||||
} else if (PART == "spacer") {
|
||||
gnal_spacer();
|
||||
} else if (PART == "insert_s8") {
|
||||
gnal_spiral_bottom_insert_s8();
|
||||
} else if (PART == "insert_16") {
|
||||
gnal_spiral_bottom_insert_16();
|
||||
} else if (PART == "spacer_16") {
|
||||
gnal_spacer_16();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,4 +1,175 @@
|
|||
//V3
|
||||
|
||||
include <../libraries/gnal_v3.scad>;
|
||||
|
||||
$fn = 200;
|
||||
spiral(40, 45.55, 2.075, $fn);
|
||||
SPOKE_COUNT = 24;
|
||||
PART="";
|
||||
|
||||
module gnal_50ft_spiral (spiral_count = 40, od = 215.75) {
|
||||
outer_d = 215;
|
||||
outer_d_inside = 209;
|
||||
outer_h = 7.5;
|
||||
|
||||
spoke_len = 81;
|
||||
spoke_w = 3;
|
||||
spoke_h = 4.2 + 3;
|
||||
|
||||
spoke_2_len = 43;
|
||||
|
||||
translate([0, 0, -3.6]) difference () {
|
||||
cylinder(r = outer_d / 2, h = spoke_h, center = true, $fn = 500);
|
||||
cylinder(r = outer_d_inside / 2, h = outer_h + 1, center = true, $fn = 500);
|
||||
}
|
||||
|
||||
difference () {
|
||||
gnal_spiral_core();
|
||||
//rounded spoke voids
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([0, 26.75, 0]) {
|
||||
cylinder(r = 2, h = 20, center = true, $fn = 40);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//main spokes
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, i * (360 / SPOKE_COUNT)]) {
|
||||
translate([(spoke_len / 2) + (48 / 2), 0, -3.6]) {
|
||||
cube([spoke_len, spoke_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
//secondary spokes
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([(outer_d / 2) - (spoke_2_len / 2) - 2, 0, -3.6]) {
|
||||
cube([spoke_2_len, spoke_w, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
//spoke cross bars
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) {
|
||||
translate([63, 0, -3.6]) {
|
||||
rotate([0, 0, 20]) {
|
||||
cube([ spoke_w, 18, spoke_h], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
translate([0, 0, -.1]) {
|
||||
rotate([0, 0, -90]) {
|
||||
difference () {
|
||||
film_guide(spiral_count);
|
||||
for (i = [0 : SPOKE_COUNT]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT) ]) {
|
||||
translate([(spoke_len / 4) + (48 / 2), 0, -3.6]) triangle_void();
|
||||
}
|
||||
}
|
||||
for (i = [0 : SPOKE_COUNT * 2]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / (SPOKE_COUNT * 2)) ]) {
|
||||
translate([(outer_d / 2) - (spoke_2_len / 2) + 1 , 0, -3.6]) triangle_void_2();
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module gnal_50ft_top () {
|
||||
H = 5;
|
||||
center_d = 53;
|
||||
spoke_w = 4.5;
|
||||
spokes = 12;
|
||||
outer_d = 215;
|
||||
inner_d = 150;
|
||||
void_d = 22.5;
|
||||
hole_d = 3.5;
|
||||
hole_spacing = 37;
|
||||
core_d = 29.5;
|
||||
core_bottom_d = 26.2;
|
||||
|
||||
difference () {
|
||||
union () {
|
||||
cylinder(r = center_d / 2, h = H, center = true, $fn = 100);
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, i * (360 / spokes)]) translate([0, outer_d / 4, 0]) cube([spoke_w, (outer_d / 2) - 1, H], center = true);
|
||||
}
|
||||
}
|
||||
//void
|
||||
cylinder(r = void_d / 2, h = H + 1, center = true, $fn = 100);
|
||||
//speed holes
|
||||
for (i = [0 : 3]) {
|
||||
rotate([0, 0, (i * 90) + 45]) translate([0, hole_spacing / 2, 0]) cylinder(r = hole_d / 2, h = H + 1, center = true);
|
||||
}
|
||||
//rounding of center cylinder
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([-2.75, 26.5, 0]) cylinder(r = 2, h = H+1, center = true, $fn = 40);
|
||||
rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([2.75, 26.5, 0]) cylinder(r = 2, h = H+1, center = true, $fn = 40);
|
||||
rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([0, 26.5, 0]) cube([5, 4, H + 1], center = true);
|
||||
}
|
||||
}
|
||||
difference () {
|
||||
cylinder(r = (center_d / 2) - 1.8, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (hole_spacing / 2) + 2, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
//outer ring
|
||||
difference () {
|
||||
cylinder(r = outer_d / 2, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (outer_d / 2) - 5, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
//inner ring
|
||||
difference () {
|
||||
cylinder(r = inner_d / 2, h = H, center = true, $fn = 200);
|
||||
cylinder(r = (inner_d / 2) - 5, h = H + 1, center = true, $fn = 200);
|
||||
}
|
||||
//rounded cross connectors
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, i * (360 / spokes)]) translate([0, (inner_d / 2) - (spoke_w / 2), 0]) difference() {
|
||||
cylinder(r = 6.5, h = H, center = true);
|
||||
translate([6.25, 6, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.25, 6, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.1, -7, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([6.1, -7, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
difference () {
|
||||
union () {
|
||||
translate([0, 0, 3.75 + 1]) cylinder(r = core_d / 2, h = H, center = true, $fn = 60);
|
||||
translate([0, 0, 3.75 + 1 + 3.2]) cylinder(r = core_bottom_d / 2, h = H, center = true, $fn = 60);
|
||||
}
|
||||
cylinder(r = void_d / 2, h = H * 5 , center = true, $fn = 100);
|
||||
translate([0, 0, 4 + 1 + 2.25]) spacer_ridges();
|
||||
}
|
||||
//rounded outer ring connectors
|
||||
for (i = [0 : spokes]) {
|
||||
rotate([0, 0, i * (360 / spokes)]) translate([0, 205 / 2, 0]) difference () {
|
||||
cube([13, 9, H], center = true);
|
||||
translate([6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
translate([-6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
module film_guide (rotations = 40, id = 45.55, spacing = 2.075) {
|
||||
$fn = 200;
|
||||
spiral(rotations, id, spacing, $fn);
|
||||
}
|
||||
|
||||
if (PART == "") { //spiral
|
||||
gnal_50ft_spiral();
|
||||
} else if (PART == "top") {
|
||||
gnal_50ft_top();
|
||||
} else if (PART == "spacer") {
|
||||
gnal_spacer();
|
||||
} else if (PART == "insert_s8") {
|
||||
gnal_spiral_bottom_insert_s8();
|
||||
} else if (PART == "insert_16") {
|
||||
gnal_spiral_bottom_insert_16();
|
||||
} else if (PART == "spacer_16") {
|
||||
gnal_spacer_16();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
//GNAL Shared Library
|
||||
//GNAL v2 Shared Library
|
||||
|
||||
include <./path_extrude.scad>;
|
||||
include <./threads.scad>;
|
||||
|
|
|
|||
|
|
@ -1,4 +1,25 @@
|
|||
//GNAL v3 Shared Library
|
||||
|
||||
include <./path_extrude.scad>;
|
||||
include <./threads.scad>;
|
||||
|
||||
/**
|
||||
* THREADS
|
||||
* TOP (large screw)
|
||||
* metric_thread (diameter=13.6, pitch=1.5 ,thread_size = 1.6, length = 21);
|
||||
* TOP VOID
|
||||
* metric_thread (diameter=13.6 + .5, pitch=1.5, thread_size = 1.6, length = 21);
|
||||
* + clone translated along Z by 0.2mm
|
||||
* BOTTOM (small screw)
|
||||
* metric_thread (diameter=10, pitch=1.5, thread_size = 1.6, length=LEN);
|
||||
*/
|
||||
|
||||
OD = 10 + .5;
|
||||
PITCH = 1.5;
|
||||
THREAD = 1.6;
|
||||
LEN = 21;
|
||||
|
||||
INSERT_D = 26;
|
||||
|
||||
function X (start_r, spacing, fn, r, i) = (start_r + (r * spacing) + (i * calcIncrement(spacing, fn))) * cos(i * calcAngle(fn));
|
||||
function Y (start_r, spacing, fn, r, i) = (start_r + (r * spacing) + (i * calcIncrement(spacing, fn))) * sin(i * calcAngle(fn));
|
||||
|
|
@ -16,7 +37,8 @@ function calcIncrement(spacing, fn) = spacing / fn;
|
|||
/**
|
||||
* spiral_7 - Combination of spiral_3 and spiral_4 that doesn't sacrifice
|
||||
* performance. Hits an overflow when $fn is higher than 245 which creates
|
||||
* 8418 vectors at 60 rotations. It's an edge casem
|
||||
* 8418 vectors at 60 rotations. This is an edge case, only appearing in OpenSCAD
|
||||
* 2019.05 (and maybe earlier), but should be explored.
|
||||
**/
|
||||
module spiral (rotations = 40, start_d = 48, spacing = 2.075, fn) {
|
||||
|
||||
|
|
@ -50,4 +72,340 @@ module spiral (rotations = 40, start_d = 48, spacing = 2.075, fn) {
|
|||
0]
|
||||
];
|
||||
path_extrude(exShape=facetProfile, exPath=spiralPath);
|
||||
}
|
||||
|
||||
/**
|
||||
* Core (center of the reel)
|
||||
**/
|
||||
module gnal_spiral_core () {
|
||||
$fn = 360;
|
||||
|
||||
core_center_h = 4.2 + 3;;
|
||||
|
||||
core_bottom_outer_d = 53;
|
||||
core_bottom_outer_void_d = 44;
|
||||
core_bottom_outer_h = 4.2;
|
||||
|
||||
core_d = 29.5;
|
||||
core_h = 8.5;
|
||||
|
||||
core_bottom_d = 26;
|
||||
core_bottom_h = 4.2;
|
||||
|
||||
top_z_offset = (core_h / 2) - (core_center_h / 2);
|
||||
|
||||
core_void_outer_d = 20.5;
|
||||
core_void_inner_d = 14.5;
|
||||
core_void_h = 11.5;
|
||||
|
||||
arms_outer_d = 48;
|
||||
arms_inner_d = 48 - 7;
|
||||
|
||||
void_d = 18;
|
||||
|
||||
film_void = 0.6;
|
||||
|
||||
difference () {
|
||||
union() {
|
||||
//center
|
||||
translate([0, 0, -core_center_h / 2]) {
|
||||
cylinder(r = (core_bottom_outer_d - 1) / 2, h = core_center_h, center = true);
|
||||
}
|
||||
//top
|
||||
translate([0, 0, top_z_offset]) {
|
||||
cylinder(r = core_d / 2, h = core_h + core_center_h, center = true);
|
||||
}
|
||||
}
|
||||
cylinder(r = void_d / 2, h = 30, center = true);
|
||||
translate([0, 0, -7.2]) spiral_bottom_insert_void();
|
||||
}
|
||||
|
||||
//arms
|
||||
difference () {
|
||||
union () {
|
||||
translate([0, 0, top_z_offset]) difference() {
|
||||
//adjusted arm (shorter)
|
||||
intersection () {
|
||||
cylinder(r = arms_outer_d / 2, h = core_h + core_center_h, center = true);
|
||||
translate([1, 0, 0]) cylinder(r = arms_outer_d / 2, h = core_h + core_center_h, center = true);
|
||||
}
|
||||
intersection () {
|
||||
cylinder(r = arms_inner_d / 2, h = core_h + core_center_h + 1, center = true);
|
||||
translate([1, 0, 0]) cylinder(r = arms_inner_d / 2, h = core_h + core_center_h + 1, center = true);
|
||||
}
|
||||
translate([0, arms_outer_d / 2, 0]) cube([arms_outer_d, arms_outer_d, arms_outer_d], center = true);
|
||||
}
|
||||
//rounded arm end
|
||||
translate([(arms_outer_d + arms_inner_d) / 4, 0, top_z_offset]) cylinder(r = 3.5 / 2, h = core_h + core_center_h, center = true, $fn = 40);
|
||||
//adjusted arm
|
||||
translate([-((arms_outer_d + arms_inner_d) / 4) + 1, 0, top_z_offset]) cylinder(r = 3.5 / 2, h = core_h + core_center_h, center = true, $fn = 40);
|
||||
difference () {
|
||||
rotate([0, 0, -120]) translate([13.75, 0, top_z_offset]) cube([16, 20, core_h + core_center_h], center = true);
|
||||
//remove piece from adjusted arm
|
||||
translate([-19, -14, 0]) rotate([0, 0, 10]) cube([4, 4, 30], center = true);
|
||||
//remove piece from non-adjusted arm
|
||||
rotate([0, 0, 45]) translate([-19, -14, 0]) rotate([0, 0, -10]) cube([4, 4, 30], center = true);
|
||||
rotate([0, 0, -120 - 37]) translate([18, 0, top_z_offset]) {
|
||||
cylinder(r = 6.8 / 2, h = 30, center = true);
|
||||
translate([-4, -2, 0]) cube([4, 4, 30], center = true);
|
||||
}
|
||||
rotate([0, 0, -120 + 37]) translate([18, 0, top_z_offset]) {
|
||||
cylinder(r = 6.8 / 2, h = 30, center = true);
|
||||
translate([-4, 2, 0]) cube([4, 4, 30], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
//film void (notches)
|
||||
rotate([0, 0, -120]) {
|
||||
translate([20, -5, 0]) {
|
||||
rotate([0, 0, 45]) {
|
||||
cube([20, film_void, 30], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
rotate([0, 0, -120]) {
|
||||
translate([20, 5, 0]) {
|
||||
rotate([0, 0, -45]) {
|
||||
cube([20, film_void, 30], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//flatten piece
|
||||
rotate([0, 0, -120]) translate([25, 0, 0]) difference () {
|
||||
cylinder(r = 8 / 2, h = 30, center = true);
|
||||
translate([-6.9, 0, 0]) cube([8, 8, 30], center = true);
|
||||
}
|
||||
cylinder(r = core_void_outer_d / 2, h = core_void_h, center = true);
|
||||
rotate([0, 0, -120]) translate([20, 0, -1.5]) rotate([0, 0, 45]) cube([20, 20, 3.01], center = true);
|
||||
cylinder(r = void_d / 2, h = 30, center = true);
|
||||
translate([0, 0, -7.2]) spiral_bottom_insert_void();
|
||||
}
|
||||
}
|
||||
|
||||
module spiral_bottom_insert_void () {
|
||||
intersection () {
|
||||
rotate([0, 45, 0]) cube([3, INSERT_D + 2, 3], center = true);
|
||||
cylinder(r = (INSERT_D + 1) / 2, h = 6, center = true);
|
||||
}
|
||||
intersection () {
|
||||
rotate([0, 45, 90]) cube([3, INSERT_D + 2, 3], center = true);
|
||||
cylinder(r = (INSERT_D + 1) / 2, h = 6, center = true);
|
||||
}
|
||||
}
|
||||
|
||||
module gnal_spiral_bottom_insert_s8 () {
|
||||
$fn = 160;
|
||||
void_d = 18 - .3;
|
||||
H = 17;
|
||||
D2 = INSERT_D;
|
||||
|
||||
translate([0, 0, 0]) difference () {
|
||||
union () {
|
||||
cylinder(r = void_d / 2, h = H, center = true);
|
||||
//skirt
|
||||
translate([0, 0, -(H - 1) / 2]) cylinder(r = D2 / 2, h = 1.5, center = true);
|
||||
//notches
|
||||
translate([0, 0, -((H - 2.5) / 2) - .1]) {
|
||||
intersection () {
|
||||
cylinder(r = D2 / 2, h = 6, center = true);
|
||||
difference () {
|
||||
rotate([0, 45, 0]) cube([3, D2 + 2, 3], center = true);
|
||||
translate([0, 0, -1.5]) cube([6, D2 + 3, 3], center = true);
|
||||
}
|
||||
}
|
||||
intersection () {
|
||||
cylinder(r = D2 / 2, h = 6, center = true);
|
||||
rotate([0, 0, 90]) difference () {
|
||||
rotate([0, 45, 0]) cube([3, D2 + 2, 3], center = true);
|
||||
translate([0, 0, -1.5]) cube([6, D2 + 3, 3], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
translate([0, 0, -LEN / 2]) metric_thread (diameter=OD, pitch=PITCH, thread_size = THREAD, length=LEN);
|
||||
}
|
||||
}
|
||||
|
||||
module gnal_spiral_bottom_insert_16 () {
|
||||
$fn = 160;
|
||||
|
||||
void_d = 18 - .3;
|
||||
H = 17 + 8;
|
||||
D2 = INSERT_D;
|
||||
|
||||
RIDGES = 8;
|
||||
RIDGE_D = 3;
|
||||
|
||||
translate([0, 0, 0]) difference () {
|
||||
union () {
|
||||
cylinder(r = void_d / 2, h = H, center = true);
|
||||
//skirt
|
||||
translate([0, 0, -(H - 1) / 2]) cylinder(r = D2 / 2, h = 1.5, center = true);
|
||||
//notches
|
||||
translate([0, 0, -((H - 2.5) / 2) - .1]) {
|
||||
intersection () {
|
||||
cylinder(r = D2 / 2, h = 6, center = true);
|
||||
difference () {
|
||||
rotate([0, 45, 0]) cube([3, D2 + 2, 3], center = true);
|
||||
translate([0, 0, -1.5]) cube([6, D2 + 3, 3], center = true);
|
||||
}
|
||||
}
|
||||
intersection () {
|
||||
cylinder(r = D2 / 2, h = 6, center = true);
|
||||
rotate([0, 0, 90]) difference () {
|
||||
rotate([0, 45, 0]) cube([3, D2 + 2, 3], center = true);
|
||||
translate([0, 0, -1.5]) cube([6, D2 + 3, 3], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
translate([0, 0, -(H / 2) - 2]) metric_thread (diameter=OD, pitch=PITCH, thread_size = THREAD, length=LEN + 8);
|
||||
translate([0, 0, 8.5]) {
|
||||
for (i = [0: RIDGES - 1]) {
|
||||
rotate([0, 0, i * (360 / RIDGES)]) translate([void_d / 2, 0, 0]) cylinder(r = RIDGE_D / 2, h = 8.1, center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Spacers
|
||||
**/
|
||||
|
||||
module spacer_ridges () {
|
||||
ridges = 16;
|
||||
for (i = [0 : ridges]) {
|
||||
rotate([0, 0, i * (360 / ridges)]) translate([13.5, 0, 0]) cylinder(r = 1.25, h = 8, $fn = 60);
|
||||
}
|
||||
}
|
||||
|
||||
module spacer_ridges_loose () {
|
||||
ridges = 16;
|
||||
intersection () {
|
||||
union () {
|
||||
for (i = [0 : ridges]) {
|
||||
rotate([0, 0, i * (360 / ridges)]) translate([13.7, 0, 0]) cylinder(r = 1.25, h = 8, $fn = 60);
|
||||
}
|
||||
}
|
||||
cylinder(r = 13.7, h = 12, center = true);
|
||||
}
|
||||
}
|
||||
module spacer_outer_ridges () {
|
||||
ridges = 24;
|
||||
H = 6.5;
|
||||
difference () {
|
||||
union () {
|
||||
for (i = [0 : ridges]) {
|
||||
rotate([0, 0, i * (360 / ridges)]) translate([14.6, 0, -4.75]) cylinder(r = 1.25, h = 8, $fn = 30);
|
||||
}
|
||||
}
|
||||
translate([0, 0, -4.1]) difference () {
|
||||
cylinder(r = 33 / 2, h = 4, center = true, $fn = 100);
|
||||
cylinder(r2 = 33 / 2, r1 = 27.75 / 2, h = 4.1, center = true, $fn = 100);
|
||||
}
|
||||
}
|
||||
}
|
||||
module gnal_spacer () {
|
||||
add = 3.25;
|
||||
core_d = 29.5;
|
||||
core_bottom_d = 26.2 + .2;
|
||||
void_d = 22.5;
|
||||
h = 8 + add;
|
||||
translate([0, 0, (add / 2) - 1]) difference () {
|
||||
union () {
|
||||
difference () {
|
||||
cylinder(r = core_d / 2, h = h, center = true, $fn = 200);
|
||||
translate([0, 0, 8]) cylinder(r = core_bottom_d / 2, h = h, center = true, $fn = 200);
|
||||
cylinder(r = void_d / 2, h = h + 1, center = true, $fn = 200);
|
||||
}
|
||||
translate([0, 0, 0]) spacer_ridges_loose();
|
||||
spacer_outer_ridges();
|
||||
}
|
||||
//trim top
|
||||
translate([0, 0, h - 0.1]) cylinder(r = (core_d + 1) / 2, h = h, center = true, $fn = 200);
|
||||
//trim bottom
|
||||
translate([0, 0, -h + 0.9]) cylinder(r = (core_d + 1) / 2, h = h, center = true, $fn = 200);
|
||||
//finger grips
|
||||
//translate([0, 24, 0]) rotate([-6, 0, 0]) cylinder(r = 10, h = 6, center = true, $fn = 100);
|
||||
//translate([0, -24, 0]) rotate([6, 0, 0]) cylinder(r = 10, h = 6, center = true, $fn = 100);
|
||||
}
|
||||
}
|
||||
|
||||
module gnal_spacer_16 () {
|
||||
core_d = 29.5;
|
||||
core_bottom_d = 26.2 + .2;
|
||||
void_d = 18;
|
||||
h = 8;
|
||||
|
||||
RIDGES = 8;
|
||||
RIDGE_D = 3;
|
||||
translate([0, 0, 0]) difference () {
|
||||
union () {
|
||||
difference () {
|
||||
cylinder(r = core_d / 2, h = h, center = true, $fn = 200);
|
||||
cylinder(r = void_d / 2, h = h + 1, center = true, $fn = 200);
|
||||
}
|
||||
translate([0, 0, -.75]) rotate([0, 180, 0]) spacer_outer_ridges();
|
||||
}
|
||||
}
|
||||
translate([0, 0, 0]) {
|
||||
for (i = [0: RIDGES - 1]) {
|
||||
rotate([0, 0, i * (360 / RIDGES)]) translate([void_d / 2, 0, 0]) cylinder(r = RIDGE_D / 2, h = 8, center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Spokes
|
||||
**/
|
||||
|
||||
module triangle_void () {
|
||||
length = (81 / 2) - 9;
|
||||
width = 12;
|
||||
height = 4.5 + 2.7;
|
||||
ANGLE_A = 34.8;
|
||||
ANGLE_B = 180 / SPOKE_COUNT;
|
||||
difference () {
|
||||
translate([-1, 0, 0]) cube([length, width, height], center = true);
|
||||
translate([0, 10.3, 0]) rotate([0, 0, ANGLE_B]) cube([length * 2, width, height + 1], center = true);
|
||||
translate([0, -10.3, 0]) rotate([0, 0, -ANGLE_B]) cube([length * 2, width, height + 1], center = true);
|
||||
|
||||
translate([0, 10.3, -.7]) rotate([ANGLE_A, 0, 0]) cube([length *2, width, height * 10], center = true);
|
||||
translate([0, -10.3, -.7]) rotate([-ANGLE_A, 0, 0]) cube([length *2, width, height * 10], center = true);
|
||||
}
|
||||
}
|
||||
|
||||
module triangle_void_2 () {
|
||||
length = 43 - 8;
|
||||
width = 12;
|
||||
height = 4.5 + 2.7;
|
||||
ANGLE_A = 34.8;
|
||||
ANGLE_B = 90 / SPOKE_COUNT;
|
||||
angle_w = 10.2;
|
||||
difference () {
|
||||
translate([-1, 0, 0]) cube([length, width, height], center = true);
|
||||
translate([0, angle_w, 0]) rotate([0, 0, ANGLE_B]) cube([length *2, width, height * 10], center = true);
|
||||
translate([0, -angle_w, 0]) rotate([0, 0, -ANGLE_B]) cube([length *2, width, height * 10], center = true);
|
||||
|
||||
translate([0, angle_w, -.7]) rotate([ANGLE_A, 0, 0]) cube([length *2, width, height * 10], center = true);
|
||||
translate([0, -angle_w, -.7]) rotate([-ANGLE_A, 0, 0]) cube([length *2, width, height * 10], center = true);
|
||||
}
|
||||
}
|
||||
|
||||
module triangle_void_3 () {
|
||||
length = 32;
|
||||
width = 10;
|
||||
height = 4.5 + 2.7;
|
||||
ANGLE_A = 31;
|
||||
ANGLE_B = 45 / SPOKE_COUNT;
|
||||
angle_w = 7.8;
|
||||
difference () {
|
||||
translate([-1, 0, 0]) cube([length, width, height], center = true);
|
||||
translate([0, angle_w, 0]) rotate([0, 0, ANGLE_B]) cube([length *2, width, height * 10], center = true);
|
||||
translate([0, -angle_w, 0]) rotate([0, 0, -ANGLE_B]) cube([length *2, width, height * 10], center = true);
|
||||
|
||||
translate([0, angle_w, -.7]) rotate([ANGLE_A, 0, 0]) cube([length *2, width, height * 10], center = true);
|
||||
translate([0, -angle_w, -.7]) rotate([-ANGLE_A, 0, 0]) cube([length *2, width, height * 10], center = true);
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
#!/bin/bash
|
||||
V="v3"
|
||||
|
||||
echo "Rendering GNAL ${V}"
|
||||
|
||||
VERSION=`bash ./scripts/version.sh`
|
||||
CPU=`bash ./scripts/cpu.sh`
|
||||
DIST=./stl
|
||||
IMG=./img
|
||||
|
||||
NOTES=./notes/${V}.csv
|
||||
FILES=( "spacer" "top" "spiral" "insert_s8" "insert_16" "spacer_16" )
|
||||
SIZES=( "50ft" "100ft" )
|
||||
|
||||
mkdir -p $DIST
|
||||
|
||||
echo "version,cpu,file,file_hash,file_size,source_hash,source_size,facets,volume,render_time" > $NOTES
|
||||
|
||||
for SIZE in "${SIZES[@]}"
|
||||
do
|
||||
:
|
||||
mkdir -p "${DIST}/${SIZE}_${V}"
|
||||
scad="${SIZE}_${V}/gnal_${SIZE}.scad"
|
||||
srchash=`sha256sum "${scad}" | awk '{ print $1 }'`
|
||||
srcsize=`wc -c < "${scad}"`
|
||||
srcsize=`echo $srcsize | xargs`
|
||||
|
||||
for FILE in "${FILES[@]}"
|
||||
do
|
||||
:
|
||||
stl="${DIST}/${SIZE}_${V}/gnal_${SIZE}_${FILE}.stl"
|
||||
png="${IMG}/gnal_${SIZE}_${V}_${FILE}.png"
|
||||
echo "${scad} - ${FILE}"
|
||||
start=`date +%s`
|
||||
openscad -o "$stl" -D "PART=\"${FILE}\"" "${scad}"
|
||||
end=`date +%s`
|
||||
runtime=$((end-start))
|
||||
hash=`sha256sum "$stl" | awk '{ print $1 }'`
|
||||
fileSize=`wc -c < "$stl"`
|
||||
fileSize=`echo $fileSize | xargs`
|
||||
ao=`admesh -c "$stl"`
|
||||
facets=`echo "$ao" | grep "Number of facets" | awk '{print $5}'`
|
||||
volume=`echo "$ao" | grep "Number of parts" | awk '{print $8}'`
|
||||
line="${VERSION},${CPU},$stl,$hash,$fileSize,$srchash,$srcsize,$facets,$volume,$runtime"
|
||||
echo "$line" >> $NOTES
|
||||
echo "$line"
|
||||
|
||||
echo "Rendering image of ${stl}..."
|
||||
|
||||
if [ "${FILE}" -eq "spiral"]; then
|
||||
tmp=`mktemp`
|
||||
fullPath=`realpath "${stl}"`
|
||||
data="import(\"${fullPath}\");"
|
||||
echo > "${tmp}.scad"
|
||||
openscad -o "$png" --preview --imgsize=1920,1080 --colorscheme=DeepOcean -D "PART=\"${FILE}\"" "${tmp}.scad"
|
||||
else
|
||||
openscad -o "$png" --preview --imgsize=1920,1080 --colorscheme=DeepOcean -D "PART=\"${FILE}\"" "${scad}"
|
||||
fi
|
||||
done
|
||||
done
|
||||
Loading…
Reference in New Issue