115 lines
2.4 KiB
C++
115 lines
2.4 KiB
C++
#include <Adafruit_MotorShield.h>
|
|
|
|
volatile boolean debug_state = true;
|
|
volatile boolean cam_dir = true;
|
|
|
|
const int fullRotation = 600;
|
|
const int openRotationForward = 300;
|
|
const int openRotationBackward = 300;
|
|
|
|
//CAMERA COMMANDS
|
|
const char cmd_camera = 'c';
|
|
const char cmd_cam_forward = 'e';
|
|
const char cmd_cam_backward = 'f';
|
|
|
|
const char cmd_debug = 'd';
|
|
const char cmd_connect = 'i';
|
|
volatile char cmd_char = 'z';
|
|
const char cmd_mcopy_identifier = 'm';
|
|
const char cmd_cam_identifier = 'k';
|
|
|
|
const int serialDelay = 5;
|
|
|
|
Adafruit_MotorShield AFMS = Adafruit_MotorShield();
|
|
//Set up for a 200step motor (NEMA 17)
|
|
Adafruit_StepperMotor *stepper = AFMS.getStepper(200, 1);
|
|
|
|
void setupMotor () {
|
|
//TWBR = ((F_CPU /400000l) - 16) / 2; // Change the i2c clock to 400KHz
|
|
if (!AFMS.begin()) { // default frequency 1.6KHz
|
|
log("Could not find Motor Shield. Check wiring.");
|
|
while (1);
|
|
}
|
|
|
|
log("Motor Shield found.");
|
|
stepper->setSpeed(600);
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(57600);
|
|
setupMotor();
|
|
}
|
|
|
|
void loop() {
|
|
if (Serial.available()) {
|
|
// read the most recent byte
|
|
cmd_char = (char)Serial.read();
|
|
}
|
|
if (cmd_char != 'z') {
|
|
cmd(cmd_char);
|
|
cmd_char = 'z';
|
|
}
|
|
}
|
|
|
|
void cmd (char val) {
|
|
if (val == cmd_debug) {
|
|
debug();
|
|
} else if (val == cmd_connect) {
|
|
connect();
|
|
} else if (val == cmd_mcopy_identifier) {
|
|
identify();
|
|
} else if (val == cmd_cam_forward) {
|
|
setDir(true); //explicit
|
|
} else if (val == cmd_cam_backward) {
|
|
setDir(false);
|
|
} else if (val == cmd_camera) {
|
|
cam();
|
|
}
|
|
}
|
|
|
|
void debug () {
|
|
debug_state = true;
|
|
Serial.println(cmd_debug);
|
|
log("debugging enabled");
|
|
}
|
|
|
|
void connect () {
|
|
Serial.println(cmd_connect);
|
|
log("connect()");
|
|
}
|
|
|
|
void identify () {
|
|
Serial.println(cmd_cam_identifier);
|
|
log("identify()");
|
|
}
|
|
|
|
void setDir (boolean dir) {
|
|
cam_dir = dir;
|
|
if (cam_dir) {
|
|
Serial.println(cmd_cam_forward);
|
|
log("setDir = true");
|
|
} else {
|
|
Serial.println(cmd_cam_backward);
|
|
log("setDir -> false");
|
|
}
|
|
}
|
|
|
|
void cam () {
|
|
long startTime = millis();
|
|
if (cam_dir) {
|
|
stepper->step(fullRotation, FORWARD, DOUBLE);
|
|
Serial.println(cmd_cam_forward);
|
|
log("cam -> forward");
|
|
} else {
|
|
stepper->step(fullRotation, BACKWARD, DOUBLE);
|
|
Serial.println(cmd_cam_backward);
|
|
log("cam -> backward");
|
|
}
|
|
log(String(millis() - startTime));
|
|
}
|
|
|
|
void log (String msg) {
|
|
if (debug_state) {
|
|
Serial.println(msg);
|
|
}
|
|
} |