mcopy/scad/canon_mount.scad

146 lines
3.2 KiB
OpenSCAD

include <./common/common.scad>;
BaseZ = 10; //debug
BaseX = 91.4;
BaseY = 97.6;
MountX = 60;
MountY = 97.6;
MountZ = 73;
CameraY = 15;
function hypotenuese(X) = sqrt(pow(X, 2) + pow(X, 2));
module base_void (pos = [0, 0, 0]) {
$fn = 50;
D = 9.5;
X = 39;
translate(pos) {
cube([X - D, D, BaseZ + 1], center = true);
translate([(X / 2) - (D / 2), 0, 0]) cylinder(r = R(D), h = BaseZ + 1, center = true);
translate([-(X / 2) + (D / 2), 0, 0]) cylinder(r = R(D), h = BaseZ + 1, center = true);
}
}
module base_voids () {
SPACING = 40;
base_void([0, SPACING/2, 0]);
base_void([0, -SPACING/2, 0]);
}
module base (pos = [0, 0, 0]) {
translate(pos) {
//places it at 0z
translate([0, 0, -BaseZ/2]) difference () {
cube([BaseX, BaseY, BaseZ], center = true);
base_voids();
}
}
}
module sensor (pos = [0, 0, 0], LENGTH = 1) {
X = 22.3;
Y = LENGTH;
Z = 14.9;
translate(pos) {
cube([X, Y, Z], center = true);
}
}
module cage_cube (X, Y, Z) {
difference () {
cube([X, Y, Z], center = true);
cube([X-10, Y-10, Z+1], center = true);
cube([X-10, Y+1, Z-10], center = true);
cube([X+1, Y-10, Z-10], center = true);
}
}
module canon_rebel_t3i (pos = [0, 0, 0]) {
X = 133.1;
Y = 79.7;
Z = 99.5;
translate(pos) {
color("azure", 0.25) {
cage_cube(X, Y, Z);
}
color("green") sensor([0, 0, -(Z/2) + (14.9/2) + 30.75]); //160
}
}
module canon_rebel_t3i_mount (pos = [0, 0, 0]) {
translate (pos) {
cylinder(r = R(30), h = 66, center = true);
difference () {
translate([0, 52.5/2, 66/2]) cube([30, 52.5+40, 1], center = true);
translate([0, 52.5, 66/2]) cylinder(r = R(4), h = 1 + 1, center = true);
}
}
}
module canon_m_50 (pos = [0, 0, 0]) {
X = 116;
Y = 59;
Z = 88;
translate(pos) {
color("green", 0.25) {
cage_cube(X, Y, Z);
}
color("green") sensor([0, 0, -(Z/2) + (14.9/2) + 23.71]); //,150
}
}
module canon_m_50_mount () {
X = MountX;
Y = MountY;
Z = MountZ;
SPACING = 40;
ACCESS = 15;
DIAG = hypotenuese(ACCESS);
translate([0, 0, Z/2]) {
difference () {
cube([X, Y, Z], center = true);
cube([X + 1, Y-40, Z-20], center = true);
cube([X + 1, Y-20, Z-40], center = true);
//void around camera bolt
translate([0, CameraY, (Z/2) - 15]) cylinder(r = R(30), h = 20, center = true, $fn = 100);
//void for camera bolt
translate([0, CameraY, (Z/2)]) cylinder(r = R(5), h = 20 + 1, center = true, $fn = 60);
//void for base bolts
base_nut_void([0, SPACING/2, -(Z/2) + 10]);
base_nut_void([0, -SPACING/2, -(Z/2) + 10]);
//bolt access
//translate([0, 0, -10]) rotate([0, 45, 0]) cube([ACCESS, Y + 1, ACCESS], center = true);
//translate([0, 0, -10 - (ACCESS/2) + (10/4)])cube([DIAG, Y + 1, 10], center = true);
}
}
}
module base_nut_void (pos = [0, 0, 0], H = 8.5) {
translate(pos) {
cylinder(r = R(16.3), h = H, center = true, $fn = 6);
cylinder(r = R(9.7), h = H + 20, center = true, $fn = 40);
}
}
module debug () {
color("red") base();
//canon_rebel_t3i_mount([0, 20, 33]);
canon_rebel_t3i([0, 20+52.5, 66 + (99.5/2)]);
canon_m_50([0, CameraY, MountZ + 44]);
canon_m_50_mount();
}
PART = "mount";
if (PART == "mount") {
canon_m_50_mount();
} else {
debug();
}