mcopy/ino/mcopy_projector_firmware/mcopy_projector_firmware.ino

144 lines
2.9 KiB
C++

/*
JK-compatible projector element
Hardware
Arduino Uno
Itead Dual Stepper Shield
2x NEMA17 Stepper Motors
Wiring
(Will vary from motor to motor)
X01A - Green
X01B - Black
X02A - Blue
X02B - Red
Y01A - Green
Y01B - Black
Y02A - Blue
Y02B - Red
*/
#include "McopyProjector.h"
#include "McopySerial.h"
#include <AccelStepper.h>
#define TAKEUP_DIR_PIN 3
#define TAKEUP_STEP_PIN 2
#define FEED_DIR_PIN 7
#define FEED_STEP_PIN 6
#define TAKEUP_SETTINGS_A 4
#define TAKEUP_SETTINGS_B 5
#define FEED_SETTINGS_A 8
#define FEED_SETTINGS_B 9
AccelStepper takeup(AccelStepper::DRIVER, TAKEUP_STEP_PIN, TAKEUP_DIR_PIN);
AccelStepper feed(AccelStepper::DRIVER, FEED_STEP_PIN, FEED_DIR_PIN);
//CAMERA CONSTANTS
const int BUTTON = 7;
const int LED_FWD = 8;
const int LED_BWD = 9;
const int PROJECTOR_MOMENT = 240;
const int PROJECTOR_STEPS = 25;
//VARIABLES
volatile int projectorFrame = -1;
volatile char cmdChar = 'z';
volatile long now;
volatile bool direction = true;
volatile long start;
McopySerial mcopy;
McopyProjector projector(takeup, feed, TAKEUP_SETTINGS_A, TAKEUP_SETTINGS_B, FEED_SETTINGS_A, FEED_SETTINGS_B);
void setup () {
pins();
digitalWrite(LED_FWD, HIGH);
digitalWrite(LED_BWD, HIGH);
mcopy.begin(mcopy.PROJECTOR_IDENTIFIER);
projector.begin();
delay(42);
digitalWrite(LED_FWD, LOW);
digitalWrite(LED_BWD, LOW);
}
void loop () {
now = millis();
cmdChar = mcopy.loop();
cmd(cmdChar);
if (digitalRead(BUTTON) == LOW) {
projector_frame();
}
projector.loop();
}
void pins () {
pinMode(LED_FWD, OUTPUT);
pinMode(LED_BWD, OUTPUT);
pinMode(BUTTON, INPUT_PULLUP);
digitalWrite(LED_FWD, LOW);
digitalWrite(LED_BWD, LOW);
}
void cmd (char val) {
if (val == mcopy.PROJECTOR_FORWARD) {
projector_direction(true);
} else if (val == mcopy.PROJECTOR_BACKWARD) {
projector_direction(false);
} else if (val == mcopy.PROJECTOR) {
projector_frame();
} else if (val == mcopy.STATE) {
state();
}
}
void projector_direction (boolean state) {
direction = state;
if (state) {
mcopy.confirm(mcopy.PROJECTOR_FORWARD);
mcopy.log("projector_direction(true)");
projector.setDirection(true);
} else {
mcopy.confirm(mcopy.PROJECTOR_BACKWARD);
mcopy.log("projector_direction(false)");
projector.setDirection(false);
}
}
void projector_timing_start () {
start = millis();
}
void projector_timing_end () {
long end = millis();
if (projectorFrame == -1) {
projectorFrame = (end - start);
} else {
//rolling mean
projectorFrame = (projectorFrame + (end - start) / 2);
}
}
void projector_frame () {
int LED = direction ? LED_FWD : LED_BWD;
digitalWrite(LED, HIGH);
projector.frame(direction);
mcopy.confirm(mcopy.PROJECTOR);
digitalWrite(LED, LOW);
}
void state () {
String stateString = String(mcopy.CAMERA_EXPOSURE);
stateString += String(projectorFrame);
stateString += String(mcopy.STATE);
mcopy.print(stateString);
}