mcopy/scad/connectors.scad

85 lines
2.5 KiB
OpenSCAD

include <./common.scad>;
//PINS
PIN_A = [-(18 / 2) + (1 / 2) + 4.5, 2 + (3.5 / 2)];
PIN_B = [(18 / 2) - (3.5 / 2) - 3 - 1.5, 2 + (3.5 / 2)];
PIN_C = [(18 / 2) - (3.5 / 2) - 3 - 1.5, - 2 - (3.5 / 2)];
PIN_D = [-(18 / 2) + (1 / 2) + 4.5, - 2 - (3.5 / 2)];
module jk_pin (ROTATE = false, PAD = 0, HEIGHT = 10) {
if (ROTATE == false) {
cube([1 + PAD, 3.5 + PAD, HEIGHT], center = true);
} else {
rotate([0, 0, 90]) cube([1 + PAD, 3.5 + PAD, HEIGHT], center = true);
}
}
module jk_pins (PAD = 0, HEIGHT = 10) {
Z = 24 / 2 + 10 / 2;
translate([PIN_A[0], PIN_A[1], Z]) jk_pin(false, PAD, HEIGHT);
translate([PIN_D[0], PIN_D[1], Z]) jk_pin(false, PAD, HEIGHT);
translate([PIN_B[0], PIN_B[1], Z]) jk_pin(true, PAD, HEIGHT);
translate([PIN_C[0], PIN_C[1], Z]) jk_pin(true, PAD, HEIGHT);
}
module body () {
rounded_cube([17, 18, 24], d = 2, center = true, $fn = 60);
}
module male_jk103_neg () {
union (){
difference() {
color("red") cube([20, 20, 24], center = true);
rounded_cube([17 - 5, 18 - 5, 24 + 2], d = 2, center = true, $fn = 60);
//alignment notch
translate([-6, 0 , 10]) cube([6, 3, 4], center = true);
}
translate([0, 0, -12]) cube([20, 20, 24], center = true);
//access
translate([3.5, 6.2, 0]) cube([6, 6, 6], center = true);
translate([3.5, -6.2, 0]) cube([6, 6, 6], center = true);
translate([-6.5, 5, 0]) cube([6, 6, 6], center = true);
translate([-6.5, -5, 0]) cube([6, 6, 6], center = true);
}
}
module male_jk103 () {
difference () {
body();
translate([0, 0, -10]) jk_pins(0, 20);
translate([0, 0, -3]) male_jk103_neg();
//bolt
translate([15, 0, 5]) rotate([0,90,0]) cylinder(r = 1, h = 20, center = true, $fn = 40);
}
}
module male_jk103_back (){
difference() {
union () {
body();
translate([0, 0, -15]) cylinder(r = 5, h = 10, center = true, $fn = 300);
}
male_jk103();
translate([0, 0, 3]) rounded_cube([17 - 5, 18 - 5, 24], d = 2, center = true, $fn = 60);
cylinder(r = 3, h = 24 * 2, center = true, $fn = 300);
//bolt
translate([15, 0, 5]) rotate([0,90,0]) cylinder(r = 1, h = 20, center = true, $fn = 40);
}
}
module pin_inserts () {
color("red") jk_pins(0, 24);
}
module female_jk103 () {
difference () {
body();
translate([0, 0, 25]) rotate([0, 180, 0]) jk_pins(0.5, 25);
}
}