523 lines
17 KiB
OpenSCAD
523 lines
17 KiB
OpenSCAD
include <./common.scad>;
|
|
include <./knurledFinishLib_v2.scad>
|
|
include <./arduino.scad>
|
|
|
|
|
|
DISTANCE_TO_BELT_START = 25;
|
|
FAN_SIDE_Z = 45;
|
|
FAN_MOUNT_D = (102 / 2) + 50;
|
|
|
|
MOTOR_120_D = 25.2;
|
|
|
|
module motor_edge_mount () {
|
|
$fn = 200;
|
|
|
|
OUTER_D = 46;
|
|
OUTER_DIVOT = .5;
|
|
OUTER_DIVOT_W = 3;
|
|
OUTER_W = 7;
|
|
|
|
difference () {
|
|
cylinder(r = OUTER_D / 2, h = OUTER_W, center = true);
|
|
|
|
//DIVOT
|
|
difference () {
|
|
cylinder(r = OUTER_D / 2 + OUTER_DIVOT, h = OUTER_DIVOT_W, center = true);
|
|
cylinder(r = OUTER_D / 2 - OUTER_DIVOT, h = OUTER_W, center = true);
|
|
}
|
|
|
|
//BEARING
|
|
bearing(0, 0, 0, hole = false);
|
|
}
|
|
}
|
|
|
|
|
|
/*module motor_set_screw_120 () {
|
|
cube([10.19, 2.95, 2.95], center = true);
|
|
translate([(10.19 / 2) - (2.56 / 2), 0, 0]) cube([2.56, 5.8, 5.8], center = true);
|
|
}*/
|
|
|
|
module motor_set_screw_120 () {
|
|
$fn = 60;
|
|
cylinder(r = 2.95 / 2, h = 10.19, center= true);
|
|
translate([0, 0, (10.19 / 2) - (2.56 / 2)]) cylinder(r = 5.8 / 2, h = 2.56, center = true);
|
|
//translate([(10.19 / 2) - (2.56 / 2), 0, 0]) cube([2.56, 5.8, 5.8], center = true);
|
|
}
|
|
|
|
module motor_120 () {
|
|
D = MOTOR_120_D;
|
|
Z = 53.5;
|
|
screw_d = 3.2;
|
|
screw_distance = 17;
|
|
hole_d = 7;
|
|
hole_h = 2.5;
|
|
rod_len = 10;
|
|
|
|
cylinder(r = D/2, h = Z, center = true);
|
|
translate([0, 0, Z/2 + (hole_h / 2) + (rod_len / 2)]) hobbled_rod_120( h = rod_len);
|
|
translate([0, 0, Z/2 + (hole_h / 2) ]) cylinder(r = hole_d / 2, h = 2.5, center = true);
|
|
}
|
|
|
|
module hobbled_rod_120 (h = 10) {
|
|
d = 4.00;
|
|
diff = 3.33;
|
|
difference () {
|
|
cylinder(r = d/2, h = h, center = true, $fn = 60);
|
|
translate([d/2 + ((d/2) - (d - diff)), 0, 0]) cube([d, d, h + 1], center = true);
|
|
}
|
|
}
|
|
|
|
module bearing (x, y, z, width= 8, hole = true) {
|
|
$fn = 160;
|
|
innerD = 8.1;
|
|
outerD = 22.05;
|
|
fuzz = 0.1;
|
|
translate ([x, y, z]) {
|
|
difference () {
|
|
cylinder(r = outerD / 2 + fuzz, h = width, center = true);
|
|
if (hole) {
|
|
cylinder(r = innerD / 2 - fuzz, h = width, center = true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module ridged_cylinder (r = 1, h = 1, center = true, ridges, ridge_w, ridge_h) {
|
|
//$fn = 200;
|
|
difference () {
|
|
cylinder(r = r, h = h, center = center);
|
|
for (i = [0: ridges]) {
|
|
rotate([0, 0, (360 / ridges) * i]) translate([0, r - (ridge_h / 2), 0]) cube([ridge_w, ridge_h, h], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module belt_driver () {
|
|
$fn = 160;
|
|
|
|
BIG_D = 18.5;
|
|
SMALL_D = 13;
|
|
LEN = 27;
|
|
SMALL_LEN = 9;
|
|
BIG_LEN = 15;
|
|
|
|
cylinder(r = SMALL_D / 2, h = LEN, center = true);
|
|
translate([0, 0, (LEN / 2) - (BIG_LEN / 2)]) {
|
|
//cylinder(r = BIG_D / 2, h = BIG_LEN, center = true);
|
|
//ridged_cylinder(r = BIG_D / 2, h = BIG_LEN, center = true, ridges = 40, ridge_w = .2, ridge_h = .2);
|
|
translate([0, 0, -7.5]) knurled_cyl(BIG_LEN, BIG_D, 1, 1.5, .5, 0, 0);
|
|
}
|
|
translate([0, 0, -3]) {
|
|
cylinder(r1 = SMALL_D / 2, r2 = BIG_D / 2, h = LEN - BIG_LEN - SMALL_LEN, center = true);
|
|
}
|
|
}
|
|
|
|
module motor_mount (){
|
|
$fn = 200;
|
|
|
|
DISTANCE = 102;
|
|
INNER_D = MOTOR_120_D;
|
|
SEAT_D = INNER_D + 6;
|
|
SEAT_LEN = 20;
|
|
|
|
translate([DISTANCE / 2, 0, 0]) rotate([0, 90, 0]) {
|
|
motor_edge_mount();
|
|
difference () {
|
|
translate([0, 0, -4.5]) cylinder(r = 46/2, h = 2, center = true);
|
|
translate([0, 0, -4.5]) cylinder(r = 8, h = 4, center = true);
|
|
}
|
|
}
|
|
translate([-DISTANCE / 2, 0, 0]) rotate([0, 90, 0]) {
|
|
//motor_edge_mount();
|
|
}
|
|
|
|
rotate([0, 90, 0]) {
|
|
difference() {
|
|
cylinder(r = 46 / 2, h = DISTANCE - 6, center = true);
|
|
cylinder(r = INNER_D / 2, h = DISTANCE, center = true);
|
|
translate([0, 0, 23]) motor_seat_120();
|
|
|
|
translate([-100 + 6, 0, 0]) cube([200, 200, 200], center = true); //TOP
|
|
translate([0, 0, -100 + 13]) cube([200, 200, 200], center = true); //HALF
|
|
}
|
|
}
|
|
// rotate([0, 90, 0]) translate([0, 0, 23]) motor_seat_120(0);
|
|
//rotate([0, 90, 0]) translate([0, 0, 4]) motor_120();
|
|
}
|
|
|
|
module motor_seat_120 (FUZZ = 0.1) {
|
|
$fn = 200;
|
|
|
|
INNER_D = MOTOR_120_D;
|
|
OUTER_D = MOTOR_120_D + 6 + FUZZ;
|
|
SEAT_LEN = 20;
|
|
FIN_LEN = (46 - MOTOR_120_D) / 2 + .5;
|
|
screw_d = 3.2;
|
|
screw_distance = 17;
|
|
hole_d = 7;
|
|
hole_h = 2.5;
|
|
bolt_end = 5.4;
|
|
|
|
difference () {
|
|
cylinder(r = OUTER_D / 2, h = SEAT_LEN, center = true);
|
|
translate([0, 0, -2.5]) cylinder(r = INNER_D / 2, h = SEAT_LEN, center = true);
|
|
translate([-100 - 6, 0, 0]) cube([200, 200, 200], center = true);
|
|
cylinder(r = hole_d / 2, h = SEAT_LEN * 2, center = true);
|
|
translate([0, 0, 0]) {
|
|
translate([0, screw_distance/2, 0]) cylinder(r=screw_d/2, h=SEAT_LEN * 2, center = true);
|
|
translate([0, -screw_distance/2, 0]) cylinder(r=screw_d/2, h=SEAT_LEN * 2, center = true);
|
|
|
|
//bolt ends
|
|
translate([0, screw_distance/2, SEAT_LEN / 2]) cylinder(r=bolt_end/2, h=2, center = true);
|
|
translate([0, -screw_distance/2, SEAT_LEN / 2]) cylinder(r=bolt_end/2, h=2, center = true);
|
|
}
|
|
}
|
|
|
|
if (FUZZ != 0) {
|
|
translate([19, 0, 5]) rotate([90, 90, 0]) M5_bolt(25);
|
|
translate([19, 0, -5]) rotate([90, 90, 0]) M5_bolt(25);
|
|
}
|
|
difference () {
|
|
translate([(INNER_D / 2) + (FIN_LEN / 2), 0, 0]) cube([FIN_LEN, 2 + FUZZ, SEAT_LEN], center= true);
|
|
if (FUZZ == 0) {
|
|
translate([19, 0, 5]) rotate([90, 90, 0]) M5_bolt();
|
|
translate([19, 0, -5]) rotate([90, 90, 0]) M5_bolt();
|
|
}
|
|
}
|
|
}
|
|
|
|
module M5_bolt ( extra = 0) {
|
|
LEN = 25;
|
|
D = 4.91;
|
|
cylinder(r = D/2, h = LEN + extra, center = true);
|
|
}
|
|
|
|
module rod () {
|
|
$fn = 160;
|
|
|
|
WIDTH = 67;
|
|
BEARING_D = 8.05;
|
|
SMALL_D = 13;
|
|
SMALL_WIDTH = 38.5;
|
|
FUZZ = 0.1;
|
|
HOBBLED_LEN = 10;
|
|
|
|
translate([0, 0, -6]) {
|
|
difference () {
|
|
cylinder(r = BEARING_D / 2 - FUZZ, h = WIDTH, center = true); //bearing passthrough
|
|
translate([0, 0, -(WIDTH / 2) + (HOBBLED_LEN / 2) - .01]) hobbled_rod_120(h = HOBBLED_LEN);
|
|
translate([0, 0, -(WIDTH / 2) + (HOBBLED_LEN / 2)]) rotate([0, 90, 0]) translate([0, 0, 6.425]) motor_set_screw_120();
|
|
}
|
|
}
|
|
translate([0, 0, 0]) cylinder(r = SMALL_D / 2, h = SMALL_WIDTH, center = true); //full thickness rod
|
|
translate([0, 0, -2]) belt_driver();
|
|
}
|
|
|
|
module rod_end () {
|
|
$fn = 160;
|
|
|
|
OUTER_D = 23;
|
|
BEARING_D = 8.05 - 0.1;
|
|
H = 8;
|
|
|
|
difference () {
|
|
cylinder(r = OUTER_D /2, h = H, center = true);
|
|
cylinder(r = BEARING_D/2, h = H + 1, center = true);
|
|
translate([6.425, 0, 0]) rotate([0, 90, 0]) motor_set_screw_120();
|
|
}
|
|
}
|
|
|
|
module fan_mount_replacement () {
|
|
$fn = 100;
|
|
|
|
BOLT_D = 4;
|
|
BOLT_TOP = 14;
|
|
BOLT_TOP_Z = 3;
|
|
X = 74;
|
|
Y = 87;
|
|
Z = 8;
|
|
|
|
WIDTH = 19;
|
|
|
|
BOLT_SPACE_X = 63;
|
|
BOLT_SPACE_Y = 76;
|
|
|
|
BOLT_TOP_POS = (Z / 2) - (BOLT_TOP_Z / 2) + 0.01;
|
|
|
|
difference () {
|
|
rounded_cube([X, Y, Z], 8, center = true); //main plate
|
|
rounded_cube([X - (WIDTH * 2), Y - (WIDTH * 2), Z + 1], 6, center = true); //inner void
|
|
//bolt holes
|
|
translate([BOLT_SPACE_X / 2, BOLT_SPACE_Y / 2, 0]) cylinder(r = BOLT_D / 2, h = Z + 1, center = true);
|
|
translate([-BOLT_SPACE_X / 2, BOLT_SPACE_Y / 2, 0]) cylinder(r = BOLT_D / 2, h = Z + 1, center = true);
|
|
translate([-BOLT_SPACE_X / 2, -BOLT_SPACE_Y / 2, 0]) cylinder(r = BOLT_D / 2, h = Z + 1, center = true);
|
|
translate([BOLT_SPACE_X / 2, -BOLT_SPACE_Y / 2, 0]) cylinder(r = BOLT_D / 2, h = Z + 1, center = true);
|
|
|
|
//BOLT TOP
|
|
translate([BOLT_SPACE_X / 2, BOLT_SPACE_Y / 2, BOLT_TOP_POS]) cylinder(r = BOLT_TOP / 2, h = BOLT_TOP_Z, center = true);
|
|
translate([-BOLT_SPACE_X / 2, BOLT_SPACE_Y / 2, BOLT_TOP_POS]) cylinder(r = BOLT_TOP / 2, h = BOLT_TOP_Z, center = true);
|
|
translate([-BOLT_SPACE_X / 2, -BOLT_SPACE_Y / 2, BOLT_TOP_POS]) cylinder(r = BOLT_TOP / 2, h = BOLT_TOP_Z, center = true);
|
|
translate([BOLT_SPACE_X / 2, -BOLT_SPACE_Y / 2, BOLT_TOP_POS]) cylinder(r = BOLT_TOP / 2, h = BOLT_TOP_Z, center = true);
|
|
}
|
|
}
|
|
|
|
module fan_bearing_mount () {
|
|
$fn = 160;
|
|
OUTER_D = 45;
|
|
OUTER_W = 12;
|
|
difference () {
|
|
union() {
|
|
cylinder(r = OUTER_D / 2, h = OUTER_W, center = true); //cylindrical base
|
|
translate([FAN_SIDE_Z / 2, 0, 0]) cube([FAN_SIDE_Z, OUTER_D, OUTER_W], center = true); //straight base
|
|
}
|
|
bearing(0, 0, -2.01, hole = false);
|
|
cylinder(r = 8, h= 20, center = true);
|
|
}
|
|
}
|
|
|
|
module fan_mount() {
|
|
translate ([0, 0, 4]) rotate([0, 0, 90]) fan_mount_replacement();
|
|
translate ([-19, 0, FAN_SIDE_Z]) rotate([0, 90, 0]) fan_bearing_mount();
|
|
}
|
|
|
|
module partition () {
|
|
$fn = 60;
|
|
W = 4.3;
|
|
difference () {
|
|
cube([100, W, 100], center = true);
|
|
|
|
translate([0, 0, -20]) cube([25, W + 1, 32], center = true);
|
|
translate([-22, 0, -38.5]) cube([57, W + 1, 6], center = true);
|
|
translate([-25, 0, -1]) cube([25, W + 1, 43 + 32 + 6], center = true);
|
|
translate([-50, 0, -1]) cube([25, W + 1, 43 + 32 + 6 + 35], center = true);
|
|
|
|
translate([-3 , 0, 6])rotate([90, 0, 0]) cylinder(r = 12.6 / 2, h = W + 1, center = true);
|
|
|
|
translate([-32 , 0, 43])rotate([90, 0, 0]) cylinder(r = 1.5, h = W + 1, center = true);
|
|
translate([-32 + 16 , 0, 43])rotate([90, 0, 0]) cylinder(r = 1.5, h = W + 1, center = true);
|
|
}
|
|
}
|
|
|
|
module wheel () {
|
|
$fn = 120;
|
|
BIG_D = 44.25;
|
|
SMALL_D = 41.11;
|
|
LEN = 20;
|
|
cylinder(r = BIG_D/2, h = 8, center = true);
|
|
translate([0, 0, 8 - 2]) cylinder(r2 = SMALL_D/2, r1 = BIG_D/2, h = 4, center = true);
|
|
translate([0, 0, 8 + 2 + 2]) cylinder(r = SMALL_D/2, h = 8, center = true);
|
|
}
|
|
|
|
module l289N_mount () {
|
|
$fn = 60;
|
|
DISTANCE = 36.5;
|
|
H = 4;
|
|
THICKNESS = 3;
|
|
module stand () {
|
|
cylinder(r1 = 4, r2 = 3, h = H, center = true);
|
|
translate([0, 0, 1.5]) cylinder(r = 1, h = H + 3, center = true);
|
|
}
|
|
translate([0, 0, 0]) stand();
|
|
translate([DISTANCE, 0, 0]) stand();
|
|
translate([DISTANCE, DISTANCE, 0]) stand();
|
|
translate([0, DISTANCE, 0]) stand();
|
|
difference () {
|
|
translate([DISTANCE/2, DISTANCE/2, -3]) rounded_cube([DISTANCE + 8, DISTANCE + 8, THICKNESS], 8, center = true); //base
|
|
translate([DISTANCE/2, DISTANCE/2, -3]) rounded_cube([DISTANCE - 5, DISTANCE - 5, THICKNESS], 10, center = true); //base
|
|
}
|
|
|
|
translate([20, 25, -3]) base_mount_1();
|
|
}
|
|
|
|
module endstop () {
|
|
$fn = 20;
|
|
cube([33, 10, 1.5], center = true);
|
|
translate([-4, 0, (3 / 2) + (1.5 / 2)]) rounded_cube([24, 6, 3], d = 2,center = true);
|
|
translate([-4 + 4, 0, (8 / 2) + 3 + (1.5 / 2)]) cube([4.25, 6, 8], center = true);
|
|
translate([-4 - 4, 0, (8 / 2) + 3 + (1.5 / 2)]) cube([4.25, 6, 8], center = true);
|
|
translate([13.75, 0, -5.5]) cube([5.5, 10, 9.5], center = true);
|
|
}
|
|
|
|
module endstop_mount () {
|
|
STEM_W = 14;
|
|
difference () {
|
|
cube([20, 12, 15], center = true); //base
|
|
translate([0, 0, -4]) cube([21, 4.4, 15], center = true);
|
|
rotate([90, 90, 0]) translate([2, 0, -4]) cylinder(r = 1, h = 5, center = true, $fn = 20);
|
|
}
|
|
|
|
rotate([55, 0, 0]) translate([0, 0, 21.5]) {
|
|
difference () {
|
|
translate([3, 0, 0]) cube([STEM_W, 6, 38], center = true);
|
|
translate([3, 1, -21]) rotate([-60, 0, 0]) cube([STEM_W + 1, 6, 6], center = true);
|
|
}
|
|
difference () {
|
|
translate([-10, 0, 12]) cube([30, 6, 14], center = true);
|
|
translate([-19, 0, 12]) cube([5.5 + .1, 10 + .1 , 9.5 + .1], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module microswitch (position = [0, 0, 0], rotation = [0, 0, 0]) {
|
|
translate(position) {
|
|
rotate(rotation) {
|
|
cube([16, 28, 10.5], center = true);
|
|
translate([10, 8, 0]) rotate([0, 0, -7]) cube([1, 28, 4], center = true); //arm
|
|
translate([8 + 7, 14 + 8, 0]) cylinder(r = 2.5, h = 4, center = true); //wheel
|
|
translate([0, -19, 0]) cube([7, 11, 10.5], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module microswitch_mount () {
|
|
translate ([4.5, 0, 0]) {
|
|
difference () {
|
|
cube([24, 12, 15], center = true); //base
|
|
translate([0, 0, -4]) cube([25, 4.4, 15], center = true);
|
|
rotate([90, 90, 0]) translate([2, 0, -4]) cylinder(r = 1.5, h = 5, center = true, $fn = 20);
|
|
}
|
|
}
|
|
rotate ([35, 0, 0]) {
|
|
translate([0, -9, 15]) {
|
|
difference () {
|
|
translate([-1, 0, 0]) cube([13, 20, 20], center = true);
|
|
translate([-1, -8, -13]) rotate([-35, 0, 0]) cube([13, 20, 20], center = true);
|
|
translate([-1, 8, 21]) rotate([-35, 0, 0]) cube([13, 20, 20], center = true);
|
|
translate([-1, 0, 15.5]) rotate([90, 0, 90]) microswitch();
|
|
}
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
module microswitch_bump () {
|
|
$fn = 240;
|
|
BIG_D = 44.25;
|
|
W = 7;
|
|
difference () {
|
|
scale([.8, 1.2, 1]) cylinder(r = BIG_D / 2, h = W, center = true);
|
|
cylinder(r = BIG_D / 2, h = W + 1, center = true);
|
|
translate([0, 25, 0]) cube([50, 50, 50], center = true);
|
|
}
|
|
difference () {
|
|
cylinder(r = (BIG_D / 2) + 1, h = W, center = true);
|
|
cylinder(r = BIG_D / 2, h = W + 1, center = true);
|
|
}
|
|
}
|
|
|
|
//To attach electronics to projector base
|
|
//L298N
|
|
module base_mount_1 () {
|
|
$fn = 120;
|
|
BOLT_W = 63.5;
|
|
BOLT_D = 5;
|
|
difference () {
|
|
rounded_cube([79, 15, 3], d = 4, center = true);
|
|
translate([BOLT_W / 2, 0, 0]) cylinder(r = BOLT_D/2, h = 4, center = true);
|
|
translate([-BOLT_W / 2, 0, 0]) cylinder(r = BOLT_D/2, h = 4, center = true);
|
|
}
|
|
}
|
|
|
|
//arduino
|
|
module base_mount_2 () {
|
|
$fn = 120;
|
|
BOLT_W = 75;
|
|
BOLT_D = 4;
|
|
difference () {
|
|
rounded_cube([85, 12, 3], d = 4, center = true);
|
|
translate([BOLT_W / 2, 0, 0]) cylinder(r = BOLT_D/2, h = 4, center = true);
|
|
translate([-BOLT_W / 2, 0, 0]) cylinder(r = BOLT_D/2, h = 4, center = true);
|
|
}
|
|
}
|
|
|
|
//using uno and duemilanov
|
|
module arduino_mount () {
|
|
$fn = 120;
|
|
|
|
translate([25, 10, 0]) base_mount_2();
|
|
translate([25, 10 + 32, 0]) {
|
|
difference () {
|
|
base_mount_2();
|
|
translate([10, 0, 0]) cube([65, 12, 3], center = true);
|
|
}
|
|
}
|
|
standoffs(UNO);
|
|
translate ([27, 40, 0]) {
|
|
difference () {
|
|
rounded_cube([57, 60, 3], d = 4, center = true);
|
|
rounded_cube([42, 44, 4], d = 4, center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
//To hold up a lever which allows motor to control all aspects of the
|
|
//geared aparatus - Unique to the B&H projector used in project
|
|
module b_and_h_singleton () {
|
|
x = 9;
|
|
y = 7.5;
|
|
cube([x, y, 10], center = true);
|
|
translate([ 0, 0, -5.5]) cube([x + 2, y + 2, 1], center = true);
|
|
}
|
|
|
|
module flashlight_mount () {
|
|
$fn = 100;
|
|
FLASHLIGHT_D = 25.3;
|
|
ROD_D = 12.6;
|
|
difference () {
|
|
rotate([0, 90, 0]) cylinder(r = FLASHLIGHT_D / 2 + 3, h = ROD_D, center = true);
|
|
rotate([0, 90, 0]) cylinder(r = FLASHLIGHT_D / 2, h = ROD_D + .1, center = true);
|
|
}
|
|
|
|
translate([0, -35, 0]) rotate([90, 0, 0]) {
|
|
difference () {
|
|
cylinder(r = ROD_D / 2, h = 43, center = true);
|
|
translate([-10, 0, 24.5]) cube([15, 15, 15], center = true);
|
|
}
|
|
}
|
|
translate([0, -46.4, 0]) {
|
|
difference() {
|
|
rotate ([90, 90, 0]) cylinder(r = (ROD_D / 2) + 2, h = 3, center = true);
|
|
translate([50 + (ROD_D / 2), 0, 0]) cube([100, 100, 100], center = true);
|
|
translate([-50 - (ROD_D / 2), 0, 0]) cube([100, 100, 100], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module flashlight_mount_cap (DEBUG = false) {
|
|
$fn = 120;
|
|
ROD_D = 12.6;
|
|
translate([0, 0, 0]) rotate([90, 0, 0]) {
|
|
difference () {
|
|
union () {
|
|
translate([0, 0, 0]) cylinder(r = 11, h = 7, center = true);
|
|
translate([-6, 0, 0]) cube([12, 22, 7], center = true);
|
|
translate([-11.5, 0, -3]) cube([4, 22, 13], center = true);
|
|
}
|
|
difference () {
|
|
translate([0, 0, -(7 - 4.5) / 2 - .1]) cylinder(r = ROD_D / 2, h = 4.5, center = true);
|
|
translate([-10, 0, 0]) cube([15, 15, 15], center = true);
|
|
}
|
|
if (DEBUG) {
|
|
translate([0, 50, 0]) cube([100, 100, 100], center = true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module bolex_stand () {
|
|
//rough measurements
|
|
//BOLEX, bottom to mid frame 114
|
|
//165 from table to center projector frame
|
|
ADJ = 6; // adjustment
|
|
H = 51 + ADJ; //165 - 114;
|
|
QR_H = H - 22 - (ADJ / 2);
|
|
difference () {
|
|
translate([0, -3.5, QR_H]) cube([70, 88, H], center = true);
|
|
difference () {
|
|
translate(plate_center) cube([50, 90, 11], center = true);
|
|
sides_flat();
|
|
sides_angled();
|
|
}
|
|
//translate([0, 0, 40]) cube([35, 150, 30], center = true);
|
|
}
|
|
} |