mcopy/scad/arri_s_mount.scad

85 lines
2.8 KiB
OpenSCAD

include <./common.scad>;
Z = 100 - 14.5;
baseX = 134.5;
baseY = 105.4;
baseZ = 20;
innerBaseX = 106.22;
innerBaseY = 75.88;
mountBoltsX = 71;
mountBoltsY = 90.66;
boltD = 5;
camBoltD = 10;
camBoltZ = 12;
module base () {
difference () {
cube([baseX, baseY, baseZ], center =true);
cube([innerBaseX, innerBaseY, baseZ + 1], center =true);
//bolts
bolts(boltD, baseZ + 1);
}
}
module bolts (boltD = 5, boltZ = 12) {
$fn = 60;
translate([mountBoltsX/2, mountBoltsY/2, 0]) cylinder(r = R(boltD), h = boltZ, center = true);
translate([-mountBoltsX/2, mountBoltsY/2, 0]) cylinder(r = R(boltD), h = boltZ, center = true);
translate([mountBoltsX/2, -mountBoltsY/2, 0]) cylinder(r = R(boltD), h = boltZ, center = true);
translate([-mountBoltsX/2, -mountBoltsY/2, 0]) cylinder(r = R(boltD), h = boltZ, center = true);
}
module camera_bolt (width = 20) {
$fn = 60;
translate([width/2, 0, 0]) cylinder(r = R(camBoltD), h = Z + 1);
translate([-width/2, 0, 0]) cylinder(r = R(camBoltD), h = Z + 1);
cube([width, camBoltD, Z + 1], center = true);
}
module wing_nuts (nutZ = 0) {
translate([mountBoltsX/2, mountBoltsY/2, nutZ]) rotate([0, 0, 5]) cube([3.5, 22, 11], center = true);
translate([-mountBoltsX/2, mountBoltsY/2, nutZ]) rotate([0, 0, 5]) cube([3.5, 22, 11], center = true);
translate([mountBoltsX/2, -mountBoltsY/2, nutZ]) rotate([0, 0, 5]) cube([3.5, 22, 11], center = true);
translate([-mountBoltsX/2, -mountBoltsY/2, nutZ]) rotate([0, 0, 5]) cube([3.5, 22, 11], center = true);
}
module mount () {
difference () {
rounded_cube([mountBoltsX + 20, baseY, Z], d = 20, center =true, $fn = 60);
//center void
translate([0, 0, -camBoltZ]) cube([mountBoltsX - 20, innerBaseY, Z], center =true);
//side void
translate([0, 0, -camBoltZ]) cube([baseX + 1, innerBaseY - 40, Z], center =true);
bolts(boltD + .4, Z + 1);
//inset
translate([0, 0, (Z / 2) - (Z / 2) + 15]) bolts(20, Z);
camera_bolt();
wing_nuts(-(Z / 2) + 20.5);
}
}
module center_fitting () {
SMALL_D = 4.5;
SMALL_Z = 9;
LARGE_D = 9.4;
translate([10.7, 0, 0]) cylinder(r = R(SMALL_D), h = SMALL_Z, center = true, $fn = 40);
difference () {
//cube
translate([(SMALL_D/2) + (LARGE_D / 2), 0, -(SMALL_Z/2)-(camBoltZ/2)]) cube([camBoltD + SMALL_D, camBoltD - 0.3, camBoltZ], center = true);
cylinder(r = R(LARGE_D), h = 60, center = true, $fn = 60);
translate([10.7 - 1, 0, 0]) difference () {
translate([(camBoltD + 1) / 2, 0, 0]) cube([camBoltD + 1, camBoltD + 1, 60], center = true);
cylinder(r = R(camBoltD), h = 60, center = true, $fn = 60);
}
}
}
//base();
//translate([0, 0, (baseZ/2) + (Z/2) + 5]) mount();
//translate([0, 0, (baseZ/2) + Z + 9])
center_fitting();