scad/common.scad

@@ -39,11 +39,6 @@ module m3_nut (H = 5) {
     cylinder(r=R(6.6), h=H, center=true, $fn=6);
 }
 
-echo("common.scad - m4_nut");
-module m4_nut (H = 5) {
-    cylinder(r=R(7.15), h=H, center=true, $fn=6);
-}
-
 module opto_endstop(){
  difference(){
   union(){

scad/jk_lens_assembly.scad

@@ -1,88 +0,0 @@
-//
-// JK lens assembly
-//
-include <./common.scad>;
-include <./bellows.scad>;
-
-PART = "";
-
-LinearBearingOuterDiameter = 15;
-LinearBearingHeight = 24;
-LinearBearingBoreDiameter = 8;
-
-ThreadDiameter = 4; //8;
-LinearMotionDiameter = 8;
-
-TNutDiameter1 = 22;
-TNutDiameter2 = 10.2;
-TNutInnerDiameter = 8;
-TNutHeight1 = 3.5;
-TNutHeight2 = 15;
-TNutOffset = 1.5;
-
-RodLength = 100;
-
-ZOffset = -35;
-XOffset = -35;
-
-module linearBearing () {
-	difference () {
-		cylinder(r = R(LinearBearingOuterDiameter), h = LinearBearingHeight, center = true, $fn = 100);
-		cylinder(r = R(LinearBearingBoreDiameter), h = LinearBearingHeight + 1, center = true, $fn = 60);
-	}
-}
-
-module threadedRod (H = 40) {
-	color("green") cylinder(r = R(ThreadDiameter), h = H, center = true, $fn = 60);
-}
-
-module linearMotionRod (H = 40) {
-	color("blue") cylinder(r = R(LinearMotionDiameter), h = H, center = true, $fn = 60);
-}
-
-module TNut () {
-	difference () {
-		union () {
-			translate([0, 0, -(TNutHeight2 / 2) + (TNutHeight1 / 2) + TNutOffset]) cylinder(r = R(TNutDiameter1), h = TNutHeight1, center = true, $fn = 100);
-			cylinder(r = R(TNutDiameter2), h = TNutHeight2, center = true, $fn = 80);
-		}
-		cylinder(r = R(TNutInnerDiameter), h = TNutHeight2 + 1, center = true, $fn = 60);
-	}
-}
-
-module lens_assembly_bellows_board () {
-	bellows_camera_board();
-	difference () {
-		translate([0, -32.5, 2]) cube([30, 15, 15], center = true);
-		rotate([-90, 0, 0]) {
-			translate([-13, -5, XOffset]) rotate([0, 90, 0]) m4_nut();
-			translate([13, -5, XOffset]) rotate([0, 90, 0]) m4_nut();
-		}
-		rotate([-90, 0, 0]) translate([0, -5, XOffset]) rotate([0, 90, 0]) threadedRod(RodLength);	
-	}
-}
-
-rotate([90, 0, 0]) lens_assembly_bellows_board();
-
-
-//Z axis
-translate([ZOffset, 5, 0])  threadedRod(RodLength);
-//translate([40, 8, 0]) linearMotionRod(RodLength);
-
-//translate([40, 8, 0]) linearBearing();
-//translate([-40, 8, 25]) rotate([180, 0, 0]) TNut();
-//translate([-40, 8, -25]) TNut();
-
-translate([ZOffset, 5, 15]) m4_nut();
-translate([ZOffset, 5, -15]) m4_nut();
-
-//X axis
-//translate([0, -5, XOffset]) rotate([0, 90, 0]) threadedRod(RodLength);
-//translate([0, -8, 40]) rotate([0, 90, 0])  linearMotionRod(RodLength);
-
-//translate([0, -8, 40]) rotate([0, 90, 0]) linearBearing();
-//translate([-25, -8, -40]) rotate([0, 90, 0]) TNut();
-//translate([25, -8, -40]) rotate([0, -90, 0]) TNut();
-
-//translate([-15, -5, XOffset]) rotate([0, 90, 0]) m4_nut();
-//translate([15, -5, XOffset]) rotate([0, 90, 0]) m4_nut();