 Matt McWilliams
|
d31ac53bd1
|
Back is ready to print
|
2024-01-09 13:54:01 -05:00 |
|
Matt McWilliams
|
9b954852aa
|
Add the first draft for the CPC plug back
|
2024-01-08 15:49:08 -05:00 |
|
Matt McWilliams
|
3758916fb5
|
Adjust plug insert
|
2024-01-06 17:56:55 -05:00 |
|
Matt McWilliams
|
25c1395655
|
make insert thicker for betther overall strength of the plug
|
2024-01-06 14:30:00 -05:00 |
|
Matt McWilliams
|
440edd7b18
|
Add 5mm marks to bolex plate
|
2023-12-27 23:56:10 -05:00 |
|
Matt McWilliams
|
a2f045841f
|
Fix bolt countersink in bolex mounting block. Add center line to top
|
2023-12-27 20:04:43 -05:00 |
|
Matt McWilliams
|
c890107e1e
|
Experimental refactor, move commonly-used pattern of cylinder() module with 4 names arguments to cy() with 3 positional arguments, D = diameter, H = height, and FN = $fn. Might improve readability and reduce repetative use of center = true.
|
2023-12-26 17:37:39 -05:00 |
|
Matt McWilliams
|
a5df1650b9
|
Move nuts to bottom of camera sled and bolts can drop in from the top (easier assembly, bolts can be glued in place or held in more easily). Create camera sled bolex plate and modify the bolex standoff to accomodate it. WIP.
|
2023-12-23 23:08:59 -05:00 |
|
Matt McWilliams
|
173ce499bc
|
CPC connector work
|
2023-12-15 19:40:18 -05:00 |
|
Matt McWilliams
|
3c5e31a961
|
Work on CPC Connector plug
|
2023-12-10 22:48:12 -05:00 |
|
Matt McWilliams
|
0f893d94c4
|
Fix the dual projector script and add notes
|
2023-11-30 22:32:48 -05:00 |
|
Matt McWilliams
|
b08f5094d5
|
Make a solid bearing roller
|
2023-11-30 22:32:33 -05:00 |
|
Matt McWilliams
|
70e046eeb7
|
Fix plug diameter
|
2023-11-30 22:32:18 -05:00 |
|
Matt McWilliams
|
58d0742187
|
Add takeup signal terminals to the mcopy projector board.
|
2023-11-28 23:09:09 -05:00 |
|
Matt McWilliams
|
f84e8b741a
|
Developed a seemingly working fix with the "correction loop" strategy. Might be putting the motor through hell but it is consistent.
|
2023-11-25 20:22:44 -05:00 |
|
Matt McWilliams
|
fcf24b5539
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
Matt McWilliams
|
128a4d2ded
|
Update mcopy_JKMM100_work to have McopySerial library
|
2023-11-25 20:05:52 -05:00 |
|
Matt McWilliams
|
b14d24e650
|
Prototype for Arduino Mega shield for projector.
|
2023-11-25 18:08:10 -05:00 |
|
Matt McWilliams
|
7995665c6b
|
Add camera sled
|
2023-11-24 10:58:20 -05:00 |
|
Matt McWilliams
|
a22906d3c2
|
Add mcopy projector board.
|
2023-11-22 17:33:23 -05:00 |
|
Matt McWilliams
|
042533dc85
|
Add plugs for linear bearings in rail ends.
|
2023-11-19 16:08:37 -05:00 |
|
Matt McWilliams
|
5fbefeecbf
|
Update to the orbital brace
|
2023-11-13 20:43:13 -05:00 |
|
Matt McWilliams
|
a9772ff081
|
Changes to the brace to allow the projector to fit. Made Y of panel larger.
|
2023-11-13 20:41:26 -05:00 |
|
Matt McWilliams
|
cdf983c7c6
|
Render STLs for mcopy_projector and mcopy_rails. Make tweaks to orbital mount to fit bolts.
|
2023-11-12 15:22:23 -05:00 |
|
Matt McWilliams
|
03f886580f
|
Created orbital brace corner and rendered additional stls
|
2023-11-09 15:54:56 -05:00 |
|
Matt McWilliams
|
a06e2869b9
|
Adjust bolt voids on corner_bracket
|
2023-11-08 18:15:31 -05:00 |
|
Matt McWilliams
|
6bafb263de
|
Projector rails added and printed
|
2023-11-04 09:38:20 -04:00 |
|
Matt McWilliams
|
493ff5fbf6
|
Update raisl and render all files
|
2023-11-01 00:27:46 -04:00 |
|
Matt McWilliams
|
c29e0880ac
|
Work on rails and lens gantry. First prototype is made. Rendering all.
|
2023-10-30 22:02:30 -04:00 |
|
Matt McWilliams
|
986c7a915b
|
Tweaks to lens sled gantry
|
2023-10-26 18:11:35 -04:00 |
|
Matt McWilliams
|
68b1b8b819
|
Double bearings in lens sled
|
2023-10-24 22:20:47 -04:00 |
|
Matt McWilliams
|
382ba56fa7
|
Create a prospective "inaccurate" analogReadAverage method.
|
2023-10-10 22:29:02 -04:00 |
|
Matt McWilliams
|
24d6685047
|
Use I to trigger projector.home()
|
2023-10-10 22:12:31 -04:00 |
|
Matt McWilliams
|
565d2ecceb
|
Add second dataset for testing findPeak method
|
2023-10-10 21:20:51 -04:00 |
|
Matt McWilliams
|
c4456e458f
|
Add "home" as command character "I".
|
2023-10-10 21:16:49 -04:00 |
|
Matt McWilliams
|
f707dedc91
|
New homing behavior. Ready to port back to original.
|
2023-10-09 22:59:05 -04:00 |
|
Matt McWilliams
|
702fc4680d
|
Had accidentally switched motors, explaining odd homing behavior. New homing behavior whips ass.
|
2023-10-09 22:58:48 -04:00 |
|
Matt McWilliams
|
99b63150ac
|
Add more smoothing during homing step. Is running consistently but is ending with motor in wrong position each time. Very strange.
|
2023-10-09 20:52:58 -04:00 |
|
Matt McWilliams
|
6e7c226c57
|
Make a sample script for analyzing the array during homing step.
|
2023-10-09 20:52:18 -04:00 |
|
Matt McWilliams
|
c8e5f7b742
|
Caught one bug after separating out code
|
2023-10-09 19:15:30 -04:00 |
|
Matt McWilliams
|
0cf147d185
|
Piece off homing code into its own script.
|
2023-10-09 19:09:50 -04:00 |
|
Matt McWilliams
|
cf1514f53e
|
Print lens slded at full width (140mm for now)
|
2023-10-09 19:07:16 -04:00 |
|
Matt McWilliams
|
af3843a8ef
|
Add servo functionality for rack and pinion motion. Need to fix home feature.
|
2023-10-09 09:59:19 -04:00 |
|
Matt McWilliams
|
91ce2dd450
|
Add BOM log lines and move rail ends into its own module
|
2023-10-09 09:58:55 -04:00 |
|
Matt McWilliams
|
71c9efae42
|
Tweak to the rack and pinion mechanism to allow it to fit.
|
2023-10-09 09:58:35 -04:00 |
|
Matt McWilliams
|
08ce0d792b
|
Fix for case where this.confirmExec is not a function
|
2023-10-08 18:15:31 -04:00 |
|
Matt McWilliams
|
754ef17b74
|
Update servo gear to fit reinforced servo connectors.
|
2023-10-08 11:41:35 -04:00 |
|
Matt McWilliams
|
5d4fec8c81
|
Start adding BOM log lines to build.
|
2023-10-07 15:26:10 -04:00 |
|
Matt McWilliams
|
1e0338a77f
|
Update rack and pinion library to one that produces valid geometry. Make first pass at rack and pinion gear
|
2023-10-06 13:47:15 -04:00 |
|
Matt McWilliams
|
e6b9628746
|
All projector work from today
|
2023-10-05 17:28:01 -04:00 |
|
Matt McWilliams
|
6f68081dc5
|
Restore the home method. Now it compiles.
|
2023-10-03 13:44:04 -04:00 |
|
Matt McWilliams
|
66b18dd351
|
Work on LED enclosure
|
2023-10-03 09:16:34 -04:00 |
|
Matt McWilliams
|
b5f5b6461a
|
Work on LED housings
|
2023-09-28 22:51:55 -04:00 |
|
Matt McWilliams
|
6dd29d9596
|
Disable home feature for now. Fixed impossibly stupid bug with reverse mode. Used uint16_t rather than int16_t causing an overflow.
|
2023-09-28 20:46:45 -04:00 |
|
Matt McWilliams
|
29ba125534
|
Work on LED housing.
|
2023-09-27 21:31:35 -04:00 |
|
Matt McWilliams
|
06906eca42
|
Start progress on rack and pinion nub mover
|
2023-09-27 19:10:13 -04:00 |
|
Matt McWilliams
|
b1c8192625
|
Projector firmware progress: currently the homing function will not compile due to errors with reference and so the sketch method needs to be broken into workable smaller methods
|
2023-09-25 21:54:31 -04:00 |
|
Matt McWilliams
|
d2c7781d79
|
Servo notch puller progress
|
2023-09-25 21:53:10 -04:00 |
|
Matt McWilliams
|
37d4f50ef4
|
Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed.
|
2023-09-25 12:25:56 -04:00 |
|
Matt McWilliams
|
082ac85c5c
|
Add deeper notches for 90 degree points
|
2023-09-25 12:14:59 -04:00 |
|
Matt McWilliams
|
cfca56ba48
|
Migrate stepper block into its own module
|
2023-09-24 22:58:14 -04:00 |
|
Matt McWilliams
|
c7cb4ddbc5
|
Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully).
|
2023-09-24 22:46:38 -04:00 |
|
Matt McWilliams
|
7f98d6028b
|
Commit all work in progress
|
2023-09-21 21:06:31 -04:00 |
|
Matt McWilliams
|
401822a7bb
|
Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy
|
2023-09-15 19:18:09 -04:00 |
|
Matt McWilliams
|
173ba06590
|
Work on projector (wrong)
|
2023-09-14 23:30:29 -04:00 |
|
Matt McWilliams
|
8e90456d87
|
LED gate should be larger
|
2023-09-12 21:53:38 -04:00 |
|
Matt McWilliams
|
0b880a5e79
|
Add accurateRead functions and Readme
|
2023-09-06 15:41:36 -04:00 |
|
Matt McWilliams
|
082dbc0826
|
Add void for motor, threaded rod (optional) and linear rod.
|
2023-09-06 00:01:00 -04:00 |
|
Matt McWilliams
|
5eccbbf6df
|
Remove part of the 2020 ends so that it can print without supports
|
2023-09-05 23:29:48 -04:00 |
|
Matt McWilliams
|
513deb7a0a
|
Render part of the projector.
|
2023-09-05 23:15:53 -04:00 |
|
Matt McWilliams
|
2b24dc647c
|
Update lens assembly to start using a 2020 frame
|
2023-09-05 23:15:32 -04:00 |
|
Matt McWilliams
|
f8e5968f30
|
Rename JK lens assembly to reflect it is a new design
|
2023-09-05 21:31:31 -04:00 |
|
Matt McWilliams
|
18b8c84fff
|
Add additional bearings to lens sled and voids for m5 bolts to hold in side bearings.
|
2023-09-04 13:10:23 -04:00 |
|
Matt McWilliams
|
1d6ccb7838
|
Enlarge void for m5 bolt. Add void for m5 nut.
|
2023-09-04 11:43:01 -04:00 |
|
Matt McWilliams
|
a7a63a3be7
|
Render all projector and rails in current state
|
2023-09-04 10:49:20 -04:00 |
|
Matt McWilliams
|
153ef9eceb
|
Use fast-csg and parallel with 8 jobs hardcoded
|
2023-09-04 10:48:54 -04:00 |
|
Matt McWilliams
|
03f2b55762
|
Fucked up the merge
|
2023-08-29 23:33:42 -04:00 |
|
Matt McWilliams
|
6714374639
|
restore work from tonight
|
2023-08-29 23:11:24 -04:00 |
|
Matt McWilliams
|
b6b1f5d5ba
|
Parts work
|
2023-08-29 22:34:55 -04:00 |
|
Matt McWilliams
|
b30c637c10
|
Add structures to insert 2020 Tslot into to make rails fit more snug
|
2023-08-23 23:35:00 -04:00 |
|
Matt McWilliams
|
f16795b11c
|
Render the mcopy rails parts in current form
|
2023-08-23 22:27:06 -04:00 |
|
Matt McWilliams
|
86c88c4ac2
|
Printing a prototype for the lens sled
|
2023-08-23 00:14:47 -04:00 |
|
Matt McWilliams
|
dd4834de04
|
Render rails parts (still WIP)
|
2023-08-21 19:39:08 -04:00 |
|
Matt McWilliams
|
2d90c127a3
|
Render existing projector panel parts
|
2023-08-21 19:38:55 -04:00 |
|
Matt McWilliams
|
51d440fccc
|
Render all working CPC connector parts
|
2023-08-21 19:38:16 -04:00 |
|
Matt McWilliams
|
2e3ed56bb3
|
Update part names of bellows.scad. Render missing magnetic board.
|
2023-08-21 19:34:21 -04:00 |
|
Matt McWilliams
|
4be57f3128
|
Update part names for CPC connectors
|
2023-08-21 19:31:20 -04:00 |
|
Matt McWilliams
|
de6f0d0495
|
Compile all parts in project, optionally using GNU parallel if available.
|
2023-08-21 19:04:39 -04:00 |
|
Matt McWilliams
|
010927c5ca
|
Rename rails_2020 to mcopy_rails
|
2023-08-20 23:55:27 -04:00 |
|
Matt McWilliams
|
3346bf01af
|
Work on rails having a bearing
|
2023-08-20 23:54:21 -04:00 |
|
Matt McWilliams
|
788cac7d50
|
All work towards creating a sled rail for the lens carriage assembly
|
2023-08-20 18:35:48 -04:00 |
|
Matt McWilliams
|
a8a33a823a
|
Update to 1.8.0 to reflect new breaking changes in app
|
2023-08-06 15:22:38 -04:00 |
|
Matt McWilliams
|
e7e7f86ab3
|
Manual merge from capper branch: all changes to devices library.
|
2023-08-06 15:04:33 -04:00 |
|
Matt McWilliams
|
386285d48c
|
Definition file that prevents compiler warnings on some platforms. Still unexplained because tsc is installed local to the project.
|
2023-08-06 14:58:26 -04:00 |
|
Matt McWilliams
|
c4119ab7cc
|
Manual merge from capper branch: all changes to arduino library with some improvements.
|
2023-08-06 14:56:42 -04:00 |
|
Matt McWilliams
|
176643f148
|
Manual merge from capper branch: all changes to display library.
|
2023-08-06 14:36:31 -04:00 |
|
Matt McWilliams
|
8b235bb6b0
|
mitchell work
|
2023-08-05 14:42:03 -04:00 |
|
Matt McWilliams
|
142c990a0e
|
Refactored GUI into TypeScript and class-based format
|
2023-03-18 16:59:26 -04:00 |
|
Matt McWilliams
|
3c19cd35cf
|
Resolves #4 (4 years ago!). Adds delay (stops scripts for X seconds), alert (displays an alert that stops script execution) and pause (displays a pre-populated alert).
|
2023-02-28 12:49:11 -05:00 |
|
Matt McWilliams
|
d9290f7262
|
Add branch_name.sh to print out only the branch name
|
2023-02-25 22:22:42 -05:00 |