 Matt McWilliams
|
ab35895cb3
|
update rails
|
2024-04-06 19:02:39 -04:00 |
|
Matt McWilliams
|
d31ac53bd1
|
Back is ready to print
|
2024-01-09 13:54:01 -05:00 |
|
Matt McWilliams
|
9b954852aa
|
Add the first draft for the CPC plug back
|
2024-01-08 15:49:08 -05:00 |
|
Matt McWilliams
|
3758916fb5
|
Adjust plug insert
|
2024-01-06 17:56:55 -05:00 |
|
Matt McWilliams
|
25c1395655
|
make insert thicker for betther overall strength of the plug
|
2024-01-06 14:30:00 -05:00 |
|
Matt McWilliams
|
440edd7b18
|
Add 5mm marks to bolex plate
|
2023-12-27 23:56:10 -05:00 |
|
Matt McWilliams
|
a2f045841f
|
Fix bolt countersink in bolex mounting block. Add center line to top
|
2023-12-27 20:04:43 -05:00 |
|
Matt McWilliams
|
c890107e1e
|
Experimental refactor, move commonly-used pattern of cylinder() module with 4 names arguments to cy() with 3 positional arguments, D = diameter, H = height, and FN = $fn. Might improve readability and reduce repetative use of center = true.
|
2023-12-26 17:37:39 -05:00 |
|
Matt McWilliams
|
a5df1650b9
|
Move nuts to bottom of camera sled and bolts can drop in from the top (easier assembly, bolts can be glued in place or held in more easily). Create camera sled bolex plate and modify the bolex standoff to accomodate it. WIP.
|
2023-12-23 23:08:59 -05:00 |
|
Matt McWilliams
|
173ce499bc
|
CPC connector work
|
2023-12-15 19:40:18 -05:00 |
|
Matt McWilliams
|
3c5e31a961
|
Work on CPC Connector plug
|
2023-12-10 22:48:12 -05:00 |
|
Matt McWilliams
|
b08f5094d5
|
Make a solid bearing roller
|
2023-11-30 22:32:33 -05:00 |
|
Matt McWilliams
|
70e046eeb7
|
Fix plug diameter
|
2023-11-30 22:32:18 -05:00 |
|
Matt McWilliams
|
7995665c6b
|
Add camera sled
|
2023-11-24 10:58:20 -05:00 |
|
Matt McWilliams
|
042533dc85
|
Add plugs for linear bearings in rail ends.
|
2023-11-19 16:08:37 -05:00 |
|
Matt McWilliams
|
a9772ff081
|
Changes to the brace to allow the projector to fit. Made Y of panel larger.
|
2023-11-13 20:41:26 -05:00 |
|
Matt McWilliams
|
cdf983c7c6
|
Render STLs for mcopy_projector and mcopy_rails. Make tweaks to orbital mount to fit bolts.
|
2023-11-12 15:22:23 -05:00 |
|
Matt McWilliams
|
03f886580f
|
Created orbital brace corner and rendered additional stls
|
2023-11-09 15:54:56 -05:00 |
|
Matt McWilliams
|
a06e2869b9
|
Adjust bolt voids on corner_bracket
|
2023-11-08 18:15:31 -05:00 |
|
Matt McWilliams
|
6bafb263de
|
Projector rails added and printed
|
2023-11-04 09:38:20 -04:00 |
|
Matt McWilliams
|
493ff5fbf6
|
Update raisl and render all files
|
2023-11-01 00:27:46 -04:00 |
|
Matt McWilliams
|
c29e0880ac
|
Work on rails and lens gantry. First prototype is made. Rendering all.
|
2023-10-30 22:02:30 -04:00 |
|
Matt McWilliams
|
986c7a915b
|
Tweaks to lens sled gantry
|
2023-10-26 18:11:35 -04:00 |
|
Matt McWilliams
|
68b1b8b819
|
Double bearings in lens sled
|
2023-10-24 22:20:47 -04:00 |
|
Matt McWilliams
|
cf1514f53e
|
Print lens slded at full width (140mm for now)
|
2023-10-09 19:07:16 -04:00 |
|
Matt McWilliams
|
91ce2dd450
|
Add BOM log lines and move rail ends into its own module
|
2023-10-09 09:58:55 -04:00 |
|
Matt McWilliams
|
71c9efae42
|
Tweak to the rack and pinion mechanism to allow it to fit.
|
2023-10-09 09:58:35 -04:00 |
|
Matt McWilliams
|
754ef17b74
|
Update servo gear to fit reinforced servo connectors.
|
2023-10-08 11:41:35 -04:00 |
|
Matt McWilliams
|
5d4fec8c81
|
Start adding BOM log lines to build.
|
2023-10-07 15:26:10 -04:00 |
|
Matt McWilliams
|
1e0338a77f
|
Update rack and pinion library to one that produces valid geometry. Make first pass at rack and pinion gear
|
2023-10-06 13:47:15 -04:00 |
|
Matt McWilliams
|
e6b9628746
|
All projector work from today
|
2023-10-05 17:28:01 -04:00 |
|
Matt McWilliams
|
66b18dd351
|
Work on LED enclosure
|
2023-10-03 09:16:34 -04:00 |
|
Matt McWilliams
|
b5f5b6461a
|
Work on LED housings
|
2023-09-28 22:51:55 -04:00 |
|
Matt McWilliams
|
29ba125534
|
Work on LED housing.
|
2023-09-27 21:31:35 -04:00 |
|
Matt McWilliams
|
144af1414c
|
Merge remote-tracking branch 'origin/main'
|
2023-09-27 19:10:24 -04:00 |
|
Matt McWilliams
|
06906eca42
|
Start progress on rack and pinion nub mover
|
2023-09-27 19:10:13 -04:00 |
|
Matt McWilliams
|
0d47748d6a
|
Saved work in progress
|
2023-09-27 10:07:50 -04:00 |
|
Matt McWilliams
|
d2c7781d79
|
Servo notch puller progress
|
2023-09-25 21:53:10 -04:00 |
|
Matt McWilliams
|
37d4f50ef4
|
Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed.
|
2023-09-25 12:25:56 -04:00 |
|
Matt McWilliams
|
082ac85c5c
|
Add deeper notches for 90 degree points
|
2023-09-25 12:14:59 -04:00 |
|
Matt McWilliams
|
cfca56ba48
|
Migrate stepper block into its own module
|
2023-09-24 22:58:14 -04:00 |
|
Matt McWilliams
|
c7cb4ddbc5
|
Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully).
|
2023-09-24 22:46:38 -04:00 |
|
Matt McWilliams
|
7f98d6028b
|
Commit all work in progress
|
2023-09-21 21:06:31 -04:00 |
|
Matt McWilliams
|
401822a7bb
|
Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy
|
2023-09-15 19:18:09 -04:00 |
|
Matt McWilliams
|
173ba06590
|
Work on projector (wrong)
|
2023-09-14 23:30:29 -04:00 |
|
Matt McWilliams
|
2677118bad
|
fix
|
2023-09-12 22:36:18 -04:00 |
|
Matt McWilliams
|
8e90456d87
|
LED gate should be larger
|
2023-09-12 21:53:38 -04:00 |
|
Matt McWilliams
|
082dbc0826
|
Add void for motor, threaded rod (optional) and linear rod.
|
2023-09-06 00:01:00 -04:00 |
|
Matt McWilliams
|
5eccbbf6df
|
Remove part of the 2020 ends so that it can print without supports
|
2023-09-05 23:29:48 -04:00 |
|
Matt McWilliams
|
513deb7a0a
|
Render part of the projector.
|
2023-09-05 23:15:53 -04:00 |